Re: Enable Request Debugging Output not working
Mark, going back to your original problem. I am not sure if you have IPv4 IPv6 installed, but I just double checked that the local loop backs addresse for IpV4 V6 are in my IP debugging list. Can you try adding them both in and restarting ColdFusion and lets us know how you go. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 3:01 AM, Andrew Scott andr...@andyscott.id.au wrote: Whatever Dave, like I said this option is for ASP only. Here is a support article that a quick Google search dug up, if you can provide where in IIS you make this change I will eat my words. https://support.microsoft.com/en-us/kb/294807?wa=wsignin1.0 Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 2:59 AM, Dave Watts dwa...@figleaf.com wrote: This in IIS friendly error messages Has nothing to do with ColdFusion output, nothing at all. No, but that's not what I responded to. Here's what I responded to, specifically: I am very well aware after nearly 20 years of CF Development how it works, IIS doesn't capture CF errors at all. It only displays what is sent to it, in ColdFusion's case if it is not sending the status codes it usually ends up with a blank page. You can make any adjustments to IIS you like it will make no difference. This has not been true, in my experience. And all it takes is one case where it's not true, to be able to state categorically that it's not always true. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360396 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
You're right Dave you may need to re-read the threads again, because I am well aware of the error status pages. I was mainly talking to Charles about Friendly Error messages when you dropped by, if you are confused by that, this is not my problem. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 3:20 AM, Dave Watts dwa...@figleaf.com wrote: Whatever Dave, like I said this option is for ASP only. Here is a support article that a quick Google search dug up, if you can provide where in IIS you make this change I will eat my words. https://support.microsoft.com/en-us/kb/294807?wa=wsignin1.0 I'm not sure what posting a page about an IE issue has to do with IIS. It sounds like you're talking about one thing and I'm talking about another. IIS has the ability to postprocess any sort of server-side error messages (or any other responses for that matter). This is not specific to ASP.NET - it applies to all messages that pass through IIS. Here's a screenshot I just put together demonstrating this feature. http://i.imgur.com/tBfFfC9.png In this screenshot, the only thing I've changed from the default behavior is the Edit Error Pages Settings - the default value is the third radio button. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360398 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
by default IIS will display a 500 server error if it gets back a CF error page as it doesn't know what to do with it as it doesn't send a valid error code that matches any IIS errors. In order to see the REAL cf error you have to turn on detailed error messages in IIS, or you have to create a custom error page to display instead of the 500 server error. On Mon, Apr 6, 2015 at 5:23 PM, Dave Watts dwa...@figleaf.com wrote: I guess my installs of IIS work, cause the only time I have to make any changes is in CF where it says send HTTP status codes, nothing more and nothing less. That's good for you! But there are many installs of IIS out there besides your own, and those installs might be configured differently from yours for a variety of reasons. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360400 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
You're right Dave you may need to re-read the threads again, because I am well aware of the error status pages. I was mainly talking to Charles about Friendly Error messages when you dropped by, if you are confused by that, this is not my problem. You wrote an email. I responded to that email. If your goal is to communicate clearly with other people, it is your problem if you are unable to do that. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360399 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
Whatever Dave, like I said this option is for ASP only. Here is a support article that a quick Google search dug up, if you can provide where in IIS you make this change I will eat my words. https://support.microsoft.com/en-us/kb/294807?wa=wsignin1.0 I'm not sure what posting a page about an IE issue has to do with IIS. It sounds like you're talking about one thing and I'm talking about another. IIS has the ability to postprocess any sort of server-side error messages (or any other responses for that matter). This is not specific to ASP.NET - it applies to all messages that pass through IIS. Here's a screenshot I just put together demonstrating this feature. http://i.imgur.com/tBfFfC9.png In this screenshot, the only thing I've changed from the default behavior is the Edit Error Pages Settings - the default value is the third radio button. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360397 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
My own personal, and albeit completely anecdotal, experience bears out what Russ has written. By default you get the crappy 500 error, which the first time I encountered it kept me running in circles for a while because I didn't think it was coming from CF. Hopefully the OP is at least being entertained if not helped. MG On Mon, Apr 6, 2015 at 3:48 PM, Russ Michaels r...@michaels.me.uk wrote: clealry I do know better than you, I suggest you take off your arrogamce hat for a while and actually try it with a clean install of IIS and you will find out that I am correct and that CF errors are not displayed by default, just a 500 server error. On Mon, Apr 6, 2015 at 8:35 PM, Andrew Scott andr...@andyscott.id.au wrote: ârotflmao, as a hosting provider you should know better.â Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 5:34 AM, Russ Michaels r...@michaels.me.uk wrote: sorry but you are wrong, as a hosting provider I deal with this all the time on many many servers. what I said below is correct. On Mon, Apr 6, 2015 at 8:23 PM, Andrew Scott andr...@andyscott.id.au wrote: Russ, By default IIS is set to either send Detailed if local or Custom if remote, if one is changing this setting on a remote server it is likely to be a production server and should not be be touched. At least this is the way I read that, but again you don't need to touch any IIS setting when dealing with ColdFusion errors at all. Which can be explained in more detail here. http://www.iis.net/learn/troubleshoot/diagnosing-http-errors/how-to-use-http-detailed-errors-in-iis Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 3:28 AM, Russ Michaels r...@michaels.me.uk wrote: by default IIS will display a 500 server error if it gets back a CF error page as it doesn't know what to do with it as it doesn't send a valid error code that matches any IIS errors. In order to see the REAL cf error you have to turn on detailed error messages in IIS, or you have to create a custom error page to display instead of the 500 server error. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360407 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
the only person arguing here is you, you seem very insistent on getting the last word and one-upping everyone today. All I have done is assert a fact I know to be true. On Mon, Apr 6, 2015 at 8:52 PM, Andrew Scott andr...@andyscott.id.au wrote: Russ, *sigh* I think you're arguing with the wrong guy. Yes, that is what happens. Under a default install of IIS, the setting for the error pages is as described in the picture in the last link I sent. There is no denying that is the default setting, then on top of that I clearly stated that YOU MUST CHANGE the ColdFusion sending of Status codes for the ColdFusion error, I also clearly stated that YOU DO NOT have to change any IIS setting to do this. I then clearly provided a link to back up that YOU DO NOT have to change any IIS setting. Now I believe you're arguing with the wrong person and what you are arguing back at me, is not what I have said at all! Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 5:48 AM, Russ Michaels r...@michaels.me.uk wrote: clealry I do know better than you, I suggest you take off your arrogamce hat for a while and actually try it with a clean install of IIS and you will find out that I am correct and that CF errors are not displayed by default, just a 500 server error. On Mon, Apr 6, 2015 at 8:35 PM, Andrew Scott andr...@andyscott.id.au wrote: ârotflmao, as a hosting provider you should know better.â Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 5:34 AM, Russ Michaels r...@michaels.me.uk wrote: sorry but you are wrong, as a hosting provider I deal with this all the time on many many servers. what I said below is correct. On Mon, Apr 6, 2015 at 8:23 PM, Andrew Scott andr...@andyscott.id.au wrote: Russ, By default IIS is set to either send Detailed if local or Custom if remote, if one is changing this setting on a remote server it is likely to be a production server and should not be be touched. At least this is the way I read that, but again you don't need to touch any IIS setting when dealing with ColdFusion errors at all. Which can be explained in more detail here. http://www.iis.net/learn/troubleshoot/diagnosing-http-errors/how-to-use-http-detailed-errors-in-iis Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 3:28 AM, Russ Michaels r...@michaels.me.uk wrote: by default IIS will display a 500 server error if it gets back a CF error page as it doesn't know what to do with it as it doesn't send a valid error code that matches any IIS errors. In order to see the REAL cf error you have to turn on detailed error messages in IIS, or you have to create a custom error page to display instead of the 500 server error. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360408 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
clealry I do know better than you, I suggest you take off your arrogamce hat for a while and actually try it with a clean install of IIS and you will find out that I am correct and that CF errors are not displayed by default, just a 500 server error. On Mon, Apr 6, 2015 at 8:35 PM, Andrew Scott andr...@andyscott.id.au wrote: ârotflmao, as a hosting provider you should know better.â Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 5:34 AM, Russ Michaels r...@michaels.me.uk wrote: sorry but you are wrong, as a hosting provider I deal with this all the time on many many servers. what I said below is correct. On Mon, Apr 6, 2015 at 8:23 PM, Andrew Scott andr...@andyscott.id.au wrote: Russ, By default IIS is set to either send Detailed if local or Custom if remote, if one is changing this setting on a remote server it is likely to be a production server and should not be be touched. At least this is the way I read that, but again you don't need to touch any IIS setting when dealing with ColdFusion errors at all. Which can be explained in more detail here. http://www.iis.net/learn/troubleshoot/diagnosing-http-errors/how-to-use-http-detailed-errors-in-iis Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 3:28 AM, Russ Michaels r...@michaels.me.uk wrote: by default IIS will display a 500 server error if it gets back a CF error page as it doesn't know what to do with it as it doesn't send a valid error code that matches any IIS errors. In order to see the REAL cf error you have to turn on detailed error messages in IIS, or you have to create a custom error page to display instead of the 500 server error. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360405 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
sorry but you are wrong, as a hosting provider I deal with this all the time on many many servers. what I said below is correct. On Mon, Apr 6, 2015 at 8:23 PM, Andrew Scott andr...@andyscott.id.au wrote: Russ, By default IIS is set to either send Detailed if local or Custom if remote, if one is changing this setting on a remote server it is likely to be a production server and should not be be touched. At least this is the way I read that, but again you don't need to touch any IIS setting when dealing with ColdFusion errors at all. Which can be explained in more detail here. http://www.iis.net/learn/troubleshoot/diagnosing-http-errors/how-to-use-http-detailed-errors-in-iis Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 3:28 AM, Russ Michaels r...@michaels.me.uk wrote: by default IIS will display a 500 server error if it gets back a CF error page as it doesn't know what to do with it as it doesn't send a valid error code that matches any IIS errors. In order to see the REAL cf error you have to turn on detailed error messages in IIS, or you have to create a custom error page to display instead of the 500 server error. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360403 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
Russ, By default IIS is set to either send Detailed if local or Custom if remote, if one is changing this setting on a remote server it is likely to be a production server and should not be be touched. At least this is the way I read that, but again you don't need to touch any IIS setting when dealing with ColdFusion errors at all. Which can be explained in more detail here. http://www.iis.net/learn/troubleshoot/diagnosing-http-errors/how-to-use-http-detailed-errors-in-iis Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 3:28 AM, Russ Michaels r...@michaels.me.uk wrote: by default IIS will display a 500 server error if it gets back a CF error page as it doesn't know what to do with it as it doesn't send a valid error code that matches any IIS errors. In order to see the REAL cf error you have to turn on detailed error messages in IIS, or you have to create a custom error page to display instead of the 500 server error. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360402 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
Russ, *sigh* I think you're arguing with the wrong guy. Yes, that is what happens. Under a default install of IIS, the setting for the error pages is as described in the picture in the last link I sent. There is no denying that is the default setting, then on top of that I clearly stated that YOU MUST CHANGE the ColdFusion sending of Status codes for the ColdFusion error, I also clearly stated that YOU DO NOT have to change any IIS setting to do this. I then clearly provided a link to back up that YOU DO NOT have to change any IIS setting. Now I believe you're arguing with the wrong person and what you are arguing back at me, is not what I have said at all! Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 5:48 AM, Russ Michaels r...@michaels.me.uk wrote: clealry I do know better than you, I suggest you take off your arrogamce hat for a while and actually try it with a clean install of IIS and you will find out that I am correct and that CF errors are not displayed by default, just a 500 server error. On Mon, Apr 6, 2015 at 8:35 PM, Andrew Scott andr...@andyscott.id.au wrote: ârotflmao, as a hosting provider you should know better.â Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 5:34 AM, Russ Michaels r...@michaels.me.uk wrote: sorry but you are wrong, as a hosting provider I deal with this all the time on many many servers. what I said below is correct. On Mon, Apr 6, 2015 at 8:23 PM, Andrew Scott andr...@andyscott.id.au wrote: Russ, By default IIS is set to either send Detailed if local or Custom if remote, if one is changing this setting on a remote server it is likely to be a production server and should not be be touched. At least this is the way I read that, but again you don't need to touch any IIS setting when dealing with ColdFusion errors at all. Which can be explained in more detail here. http://www.iis.net/learn/troubleshoot/diagnosing-http-errors/how-to-use-http-detailed-errors-in-iis Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 3:28 AM, Russ Michaels r...@michaels.me.uk wrote: by default IIS will display a 500 server error if it gets back a CF error page as it doesn't know what to do with it as it doesn't send a valid error code that matches any IIS errors. In order to see the REAL cf error you have to turn on detailed error messages in IIS, or you have to create a custom error page to display instead of the 500 server error. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360406 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
ârotflmao, as a hosting provider you should know better.â Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 5:34 AM, Russ Michaels r...@michaels.me.uk wrote: sorry but you are wrong, as a hosting provider I deal with this all the time on many many servers. what I said below is correct. On Mon, Apr 6, 2015 at 8:23 PM, Andrew Scott andr...@andyscott.id.au wrote: Russ, By default IIS is set to either send Detailed if local or Custom if remote, if one is changing this setting on a remote server it is likely to be a production server and should not be be touched. At least this is the way I read that, but again you don't need to touch any IIS setting when dealing with ColdFusion errors at all. Which can be explained in more detail here. http://www.iis.net/learn/troubleshoot/diagnosing-http-errors/how-to-use-http-detailed-errors-in-iis Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 3:28 AM, Russ Michaels r...@michaels.me.uk wrote: by default IIS will display a 500 server error if it gets back a CF error page as it doesn't know what to do with it as it doesn't send a valid error code that matches any IIS errors. In order to see the REAL cf error you have to turn on detailed error messages in IIS, or you have to create a custom error page to display instead of the 500 server error. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360404 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
Not to mention the display friendly error messages in IIS, is for ASP!! Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Mon, Apr 6, 2015 at 12:24 PM, Russ Michaels r...@michaels.me.uk wrote: yes that is true, however debug output is not an error, it is the debugging information that added to the bottom of a page. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360384 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
RE: Enable Request Debugging Output not working
Andrew, IIS will capture CF errors and display friendly error messages if it is set to. The debugging output, however, should display regardless of this setting as, as you stated, it is not an error. I would look at the source to see if the output is being generated and simply being hidden by a code or CSS change. I know that I've had that happen to me. Also check to see that the setting in the CF admin has not changes to display the output in dockable state. If you have your browser set to open everything in new tabs, the output would be on a different tab. I would also, as Russ stated, look for CFSETTING tags that might be disabling the output. But if it suddenly stopped working, then I would suspect an unclosed tag or CSS change. Dave -Original Message- From: Andrew Scott [mailto:andr...@andyscott.id.au] Sent: Monday, April 06, 2015 2:17 AM To: cf-talk Subject: Re: Enable Request Debugging Output not working Not to mention the display friendly error messages in IIS, is for ASP!! Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Mon, Apr 6, 2015 at 12:24 PM, Russ Michaels r...@michaels.me.uk wrote: yes that is true, however debug output is not an error, it is the debugging information that added to the bottom of a page. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360385 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
David, I am very well aware after nearly 20 years of CF Development how it works, IIS doesn't capture CF errors at all. It only displays what is sent to it, in ColdFusion's case if it is not sending the status codes it usually ends up with a blank page. You can make any adjustments to IIS you like it will make no difference. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Mon, Apr 6, 2015 at 11:20 PM, David Phelan dphe...@emerginghealthit.com wrote: Andrew, IIS will capture CF errors and display friendly error messages if it is set to. The debugging output, however, should display regardless of this setting as, as you stated, it is not an error. I would look at the source to see if the output is being generated and simply being hidden by a code or CSS change. I know that I've had that happen to me. Also check to see that the setting in the CF admin has not changes to display the output in dockable state. If you have your browser set to open everything in new tabs, the output would be on a different tab. I would also, as Russ stated, look for CFSETTING tags that might be disabling the output. But if it suddenly stopped working, then I would suspect an unclosed tag or CSS change. Dave -Original Message- From: Andrew Scott [mailto:andr...@andyscott.id.au] Sent: Monday, April 06, 2015 2:17 AM To: cf-talk Subject: Re: Enable Request Debugging Output not working Not to mention the display friendly error messages in IIS, is for ASP!! Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Mon, Apr 6, 2015 at 12:24 PM, Russ Michaels r...@michaels.me.uk wrote: yes that is true, however debug output is not an error, it is the debugging information that added to the bottom of a page. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360387 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
I am very well aware after nearly 20 years of CF Development how it works, IIS doesn't capture CF errors at all. It only displays what is sent to it, in ColdFusion's case if it is not sending the status codes it usually ends up with a blank page. You can make any adjustments to IIS you like it will make no difference. That has not been my experience. More than once I've had to change IIS settings to view CF's error messages. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360388 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
I guess my installs of IIS work, cause the only time I have to make any changes is in CF where it says send HTTP status codes, nothing more and nothing less. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 1:45 AM, Dave Watts dwa...@figleaf.com wrote: I am very well aware after nearly 20 years of CF Development how it works, IIS doesn't capture CF errors at all. It only displays what is sent to it, in ColdFusion's case if it is not sending the status codes it usually ends up with a blank page. You can make any adjustments to IIS you like it will make no difference. That has not been my experience. More than once I've had to change IIS settings to view CF's error messages. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360389 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
But Dave. This in IIS friendly error messages Has nothing to do with ColdFusion output, nothing at all. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 2:23 AM, Dave Watts dwa...@figleaf.com wrote: I guess my installs of IIS work, cause the only time I have to make any changes is in CF where it says send HTTP status codes, nothing more and nothing less. That's good for you! But there are many installs of IIS out there besides your own, and those installs might be configured differently from yours for a variety of reasons. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360391 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
I guess my installs of IIS work, cause the only time I have to make any changes is in CF where it says send HTTP status codes, nothing more and nothing less. That's good for you! But there are many installs of IIS out there besides your own, and those installs might be configured differently from yours for a variety of reasons. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360390 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
I believe the issue here, is that when you have the status code option set in ColdFusion, ColdFusion uses an H TTP status of 200, even for error pages. If you don't have that option, ColdFusion sends out status codes of 500 or whatever with there's an eeror. IIS does intercept those. Forget the imperfect language, I'm dictating to my phone Sent from my iPhone On Apr 6, 2015, at 12:31 PM, Andrew Scott andr...@andyscott.id.au wrote: But Dave. This in IIS friendly error messages Has nothing to do with ColdFusion output, nothing at all. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 2:23 AM, Dave Watts dwa...@figleaf.com wrote: I guess my installs of IIS work, cause the only time I have to make any changes is in CF where it says send HTTP status codes, nothing more and nothing less. That's good for you! But there are many installs of IIS out there besides your own, and those installs might be configured differently from yours for a variety of reasons. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360392 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
Charles it is neither here nor there. ColdFusion Robust Exceptions need this setting to be enabled in ColdFusion, the display friendly error messages is a browser option and is not something one has to touch anyway. The other option in IIS is the setting of Custom ASP errors, there is no other setting in IIS that deals with Friendly error messages. So if you don't have ASP installed like myself, you will not even see these options at all. Now as ColdFusion requires you to have the setting I clearly stated earlier in the thread, that means Robust Exceptions will be displayed and if you have the other options set attached to the end of your pages output. There is NO setting in IIS that can or will need to be touched if this section of ColdFusion is not working, I made that very clear as well. I just checked 3 servers here that doesn't have ASP.Net installed, not one of these servers has any setting that can adjust friendly error messages, but there is this option in IE if you use IE that is. The only thing I know of is when you use ASP.Net so that it displays more info than the friendly message that is displayed. In ASP.Net this is the same as turning on Robust Exceptions in ColdFusion. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 2:45 AM, Charles Sheehan-Miles char...@sheehanmiles.net wrote: I believe the issue here, is that when you have the status code option set in ColdFusion, ColdFusion uses an H TTP status of 200, even for error pages. If you don't have that option, ColdFusion sends out status codes of 500 or whatever with there's an eeror. IIS does intercept those. Forget the imperfect language, I'm dictating to my phone Sent from my iPhone On Apr 6, 2015, at 12:31 PM, Andrew Scott andr...@andyscott.id.au wrote: But Dave. This in IIS friendly error messages Has nothing to do with ColdFusion output, nothing at all. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 2:23 AM, Dave Watts dwa...@figleaf.com wrote: I guess my installs of IIS work, cause the only time I have to make any changes is in CF where it says send HTTP status codes, nothing more and nothing less. That's good for you! But there are many installs of IIS out there besides your own, and those installs might be configured differently from yours for a variety of reasons. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360393 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
This in IIS friendly error messages Has nothing to do with ColdFusion output, nothing at all. No, but that's not what I responded to. Here's what I responded to, specifically: I am very well aware after nearly 20 years of CF Development how it works, IIS doesn't capture CF errors at all. It only displays what is sent to it, in ColdFusion's case if it is not sending the status codes it usually ends up with a blank page. You can make any adjustments to IIS you like it will make no difference. This has not been true, in my experience. And all it takes is one case where it's not true, to be able to state categorically that it's not always true. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360394 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
Whatever Dave, like I said this option is for ASP only. Here is a support article that a quick Google search dug up, if you can provide where in IIS you make this change I will eat my words. https://support.microsoft.com/en-us/kb/294807?wa=wsignin1.0 Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Tue, Apr 7, 2015 at 2:59 AM, Dave Watts dwa...@figleaf.com wrote: This in IIS friendly error messages Has nothing to do with ColdFusion output, nothing at all. No, but that's not what I responded to. Here's what I responded to, specifically: I am very well aware after nearly 20 years of CF Development how it works, IIS doesn't capture CF errors at all. It only displays what is sent to it, in ColdFusion's case if it is not sending the status codes it usually ends up with a blank page. You can make any adjustments to IIS you like it will make no difference. This has not been true, in my experience. And all it takes is one case where it's not true, to be able to state categorically that it's not always true. Dave Watts, CTO, Fig Leaf Software 1-202-527-9569 http://www.figleaf.com/ http://training.figleaf.com/ Fig Leaf Software is a Service-Disabled Veteran-Owned Small Business (SDVOSB) on GSA Schedule, and provides the highest caliber vendor- authorized instruction at our training centers, online, or onsite. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360395 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
With all due respect, thats simply not true. IIS, depending on your settings, will replace coldfusion errors with a blank 500 error page. A simple google search turn up dozens and dozens of times that question was asked and resolved by changing IIS settings. Thats how I fixed my dev machine a week ago. http://stackoverflow.com/questions/13426984/500-internal-server-error-for-sql-server-error On Apr 5, 2015, at 5:37 PM, Andrew Scott andr...@andyscott.id.au wrote: IIS friendly error messages has absolutely nothing to do with Robust debugging. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Mon, Apr 6, 2015 at 4:52 AM, Charles Sheehan-Miles char...@sheehanmiles.net wrote: I had this recently... The problem wasn't Coldfusion at all, it was IIS. Even locally I couldn't get debugging. Check website settings and make sure friendly error messages or whatever it turned off (sorry I'm not at a computer so can't remember the exact terminology) Sent from my iPhone ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360381 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
That is correct and why there is a setting in ColdFusion to pass on the correct HTTP status code to IIS. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Mon, Apr 6, 2015 at 10:31 AM, Charles Sheehan-Miles char...@sheehanmiles.net wrote: With all due respect, thatâs simply not true. IIS, depending on your settings, will replace coldfusion errors with a blank 500 error page. A simple google search turn up dozens and dozens of times that question was asked and resolved by changing IIS settings. Thatâs how I fixed my dev machine a week ago. http://stackoverflow.com/questions/13426984/500-internal-server-error-for-sql-server-error On Apr 5, 2015, at 5:37 PM, Andrew Scott andr...@andyscott.id.au wrote: IIS friendly error messages has absolutely nothing to do with Robust debugging. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Mon, Apr 6, 2015 at 4:52 AM, Charles Sheehan-Miles char...@sheehanmiles.net wrote: I had this recently... The problem wasn't Coldfusion at all, it was IIS. Even locally I couldn't get debugging. Check website settings and make sure friendly error messages or whatever it turned off (sorry I'm not at a computer so can't remember the exact terminology) Sent from my iPhone ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360382 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
yes that is true, however debug output is not an error, it is the debugging information that added to the bottom of a page. On Mon, Apr 6, 2015 at 1:31 AM, Charles Sheehan-Miles char...@sheehanmiles.net wrote: With all due respect, thatâs simply not true. IIS, depending on your settings, will replace coldfusion errors with a blank 500 error page. A simple google search turn up dozens and dozens of times that question was asked and resolved by changing IIS settings. Thatâs how I fixed my dev machine a week ago. http://stackoverflow.com/questions/13426984/500-internal-server-error-for-sql-server-error On Apr 5, 2015, at 5:37 PM, Andrew Scott andr...@andyscott.id.au wrote: IIS friendly error messages has absolutely nothing to do with Robust debugging. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Mon, Apr 6, 2015 at 4:52 AM, Charles Sheehan-Miles char...@sheehanmiles.net wrote: I had this recently... The problem wasn't Coldfusion at all, it was IIS. Even locally I couldn't get debugging. Check website settings and make sure friendly error messages or whatever it turned off (sorry I'm not at a computer so can't remember the exact terminology) Sent from my iPhone ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360383 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
IIS friendly error messages has absolutely nothing to do with Robust debugging. Regards, Andrew Scott WebSite: http://www.andyscott.id.au/ Google+: http://plus.google.com/113032480415921517411 On Mon, Apr 6, 2015 at 4:52 AM, Charles Sheehan-Miles char...@sheehanmiles.net wrote: I had this recently... The problem wasn't Coldfusion at all, it was IIS. Even locally I couldn't get debugging. Check website settings and make sure friendly error messages or whatever it turned off (sorry I'm not at a computer so can't remember the exact terminology) Sent from my iPhone ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360380 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
Do you have any ip restrictions set for the debug output? On Sun, Apr 5, 2015 at 3:49 AM, Mark Spence markpence...@gmail.com wrote: For some reason, suddenly debug output has stopped working on my development machine. I'm not sure why. I have tried turning it off and on, restarting the server, restarting the box. Nothing has helped. Google has failed me. Running on windows 8.1 and IIS. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360376 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
I have added 127.0.0.1 as a ip to serve debug output to, and I have also removed all ips to have debug info served to all ips. Neither results in output. On Sun, Apr 5, 2015 at 4:59 AM, Russ Michaels r...@michaels.me.uk wrote: Do you have any ip restrictions set for the debug output? On Sun, Apr 5, 2015 at 3:49 AM, Mark Spence markpence...@gmail.com wrote: For some reason, suddenly debug output has stopped working on my development machine. I'm not sure why. I have tried turning it off and on, restarting the server, restarting the box. Nothing has helped. Google has failed me. Running on windows 8.1 and IIS. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360377 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
I had this recently... The problem wasn't Coldfusion at all, it was IIS. Even locally I couldn't get debugging. Check website settings and make sure friendly error messages or whatever it turned off (sorry I'm not at a computer so can't remember the exact terminology) Sent from my iPhone On Apr 5, 2015, at 2:29 PM, Mark Spence markpence...@gmail.com wrote: I have added 127.0.0.1 as a ip to serve debug output to, and I have also removed all ips to have debug info served to all ips. Neither results in output. On Sun, Apr 5, 2015 at 4:59 AM, Russ Michaels r...@michaels.me.uk wrote: Do you have any ip restrictions set for the debug output? On Sun, Apr 5, 2015 at 3:49 AM, Mark Spence markpence...@gmail.com wrote: For some reason, suddenly debug output has stopped working on my development machine. I'm not sure why. I have tried turning it off and on, restarting the server, restarting the box. Nothing has helped. Google has failed me. Running on windows 8.1 and IIS. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360378 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Re: Enable Request Debugging Output not working
The most common cause is that you have a CFSETTING in your code somewhere that is preventing the debug output. Have you tried simply creating a simple test page outside of your application to check if the debug output works ? On Sun, Apr 5, 2015 at 7:29 PM, Mark Spence markpence...@gmail.com wrote: I have added 127.0.0.1 as a ip to serve debug output to, and I have also removed all ips to have debug info served to all ips. Neither results in output. On Sun, Apr 5, 2015 at 4:59 AM, Russ Michaels r...@michaels.me.uk wrote: Do you have any ip restrictions set for the debug output? On Sun, Apr 5, 2015 at 3:49 AM, Mark Spence markpence...@gmail.com wrote: For some reason, suddenly debug output has stopped working on my development machine. I'm not sure why. I have tried turning it off and on, restarting the server, restarting the box. Nothing has helped. Google has failed me. Running on windows 8.1 and IIS. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360379 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
Enable Request Debugging Output not working
For some reason, suddenly debug output has stopped working on my development machine. I'm not sure why. I have tried turning it off and on, restarting the server, restarting the box. Nothing has helped. Google has failed me. Running on windows 8.1 and IIS. ~| Order the Adobe Coldfusion Anthology now! http://www.amazon.com/Adobe-Coldfusion-Anthology/dp/1430272155/?tag=houseoffusion Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:360375 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/groups/cf-talk/unsubscribe.cfm
