[Chevelle-list] testing new addy

testtest Dan McIntosh 1983 Fleetwood Coupe 90'd http://www.lowriderimpala.com

[Chevelle-list] OT: 2006 Charger for sale, $300,000

You guys gotta see this frickin paint job chalk this one under, "what were they thinking?"

Re: [Chevelle-list] LT1 Engine

yes it's garbage. what time will you be throwing out? I'll make sure it doesnt stay on your lawn for long. Dan McIntosh90'd out 1983 Fleetwood Coupe Street Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Dan Mascheck To:

Re: [Chevelle-list] '66 roof body work - OIL CAN

How about Pepsi in tall, cold, glass bottles Dan McIntosh90'd out 1983 Fleetwood Coupe Street Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Larry Shouse To: The Chevelle Mailing List Sent: Friday, September 15, 2006 6:30 AM Subject: Re:

Re: [Chevelle-list] '66 roof body work - OIL CAN

CIWhttp://www.karlgroves.comGrayscale Content Management System:http://www.grayscalecms.comIndependent Musician's Handbook:http://www.indiebook.com From: Dan McIntosh [mailto:[EMAIL PROTECTED] Sent: Friday, September 15, 2006 9:22 PMTo: The Chevelle Mailing ListSubject

Re: [Chevelle-list] Best primer - frame/ suspension parts2

I've never heard of a powdercoat "primer" I know of some places that zinc plate or galvanize before they apply the powdercoating though. The biggest problems with powdercoating is poor prep work (cleaning, degreasing, etc..) and improper cure time/ temperature. I powdercoat stuff all the

Re: [Chevelle-list] engine question

 Put one in your 67 and see if you can out hop me John! : ) Dan McIntosh90'd out 1983 Fleetwood Coupe Street Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Monday, September 11,

Re: [Chevelle-list] Welding question

I'll go in a direction nobody else has yet and ask, what size wire are you running? I've had great success on thin gauge steel with .025 solid core wire and shielding gas. You can also weld thin stuff with .035 but the technique is different. Also, don't forget to tack weld, move, tack

Re: [Chevelle-list] Welding question

Certified CIWhttp://www.karlgroves.comGrayscale Content Management System:http://www.grayscalecms.comIndependent Musician's Handbook:http://www.indiebook.com From: Dan McIntosh [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 29, 2006 9:22 PMTo: The Chevelle Mailing

Re: [Chevelle-list] Pre paint

always had good luck with lacquer thinner and its really cheap! Dan McIntosh90'd out 1983 Fleetwood Coupe Street Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Bill Bradley IV To: The Chevelle Mailing List Sent: Monday, July 31, 2006 3:27

Re: [Chevelle-list] Pic 64+65

Hi Jim. Heres a link to my website page with pictures of the 65 Malibu I had a few years ago. This car was my reason for finding and joining this list. Although I've moved on to a completely different style of vehicles now, I have alot of good memories of fun times with this 65. I

Re: [Chevelle-list] OT: new toy

I recently purchased a 2006 Ducati SS800, then after talking with my wife, we went on Friday and got her an 06 Ninja 250 to learn on. Heres a pic of the bikes. http://i69.photobucket.com/albums/i43/216rider/ShellandDansbikesLarge.jpg Dan McIntosh90'd out 1983 Fleetwood Coupe Street Metal

Re: [Chevelle-list] OT: new toy

. Sorry, I guessI am getting too old and think about what could happen. Had to vent, Russ From: [EMAIL PROTECTED] (Dan McIntosh)Reply-To: The Chevelle Mailing List Chevelle-list@chevelles.netTo: "The Chevelle Mailing List" Chevelle-list@chevelles.netS

Re: [Chevelle-list] the prettiest '66 you'll ever see

Looks nice. What happens when it rains? Dan McIntoshStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: J. Brady To: Chevelle Group Sent: Saturday, May 27, 2006 7:37 PM Subject: [Chevelle-list] the prettiest '66 you'll ever see I'm

Re: [Chevelle-list] Removing Battery Label

peel off the sticker, and if residue remains, then wipe it with some goof-off or something similar.. Dan McIntosh90'd out 1983 Fleetwood Coupe Street Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Dennis McGillis To: The Chevelle Mailing List

Re: [Chevelle-list] Volvo S60 fan shroud assembly

My wife drives a Volvo, I wonder how she'd feel if I removed her cooling fan for "research" Dan McIntosh90'd out 1983 Fleetwood Coupe Street Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Clint Hooper To: The Chevelle Mailing List

Re: [Chevelle-list] Pre-oiling a new SBC

Or, to ask an obvious question, are you rotating it the right direction? Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Tom Blawkamp To: Dennis McGillis ; The Chevelle Mailing List Sent:

Re: [Chevelle-list] Tips or tricks for valve spring RR?

indeed, and to think it was 61 on Thursday... Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: [EMAIL PROTECTED] To: The Chevelle Mailing List Sent: Saturday, February 18, 2006 10:40 PM Subject:

Re: [Chevelle-list] New source for flux capacitors

I ordered their brass balls. Theyre handy for when I have to argue with the wife, for example, likewhy I'm buying a 500 dollar TPI wire harness for my car... Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From:

Re: [Chevelle-list] Body on rotisserie - support door openings?

Yep, if your car is a hardtop , the roof supplies all the support needed. Did you make your rotisserie, or buy one. I'd really like to use one for my car but dont really want the cost of buying one new, nor the time of building one, since I dont presume to ever need it again. Dan

Re: [Chevelle-list] Roller or ball bearings in a 12 bolt conversion

I dunno all the specificas about bearing requirements in rear ends, but, in general, roller bearing handle more of a load and last longer than ball bearings. If you decide to go with ball bearing, get sealed units so they wont leak. Dan McIntosh1960 Impala Sport CoupeStreet Metal

Re: [Chevelle-list] Front coil springs

It's a much better option than heating the coils, but not as good as buying lowering springs. If you do decide to do this, use a method other than flame cutting, such as abrasive wheel, cold saw, etc... Just remember, don't cut off too much at once, a 3" cut on the spring, DOES NOT equate

Re: [Chevelle-list] Tool Definitions: (just had to pass it on)

Title: Message Awesome! Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Zieg72 To: The Chevelle Mailing List Sent: Friday, December 23, 2005 9:06 PM Subject: [Chevelle-list] Tool

Re: [Chevelle-list] [Off Topic] Cool Christmas lightingw/music(notdial-up friendly)

TSO is awesome... Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Clint Hooper To: The Chevelle Mailing List Sent: Thursday, December 15, 2005 8:48 PM Subject: Re: [Chevelle-list] [Off Topic]

Re: [Chevelle-list] Chevelle Security

Agreed. I took my class for CCW this past weekend, and man, it almost makes me not want the responsibility of carrying a firearm. Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Craig Ellis To: The

Re: [Chevelle-list] Chevelle Security

I think convincing a jury that your vehicle is family, would be a hard sell. Not saying I dont agree that anyone who is willing to steal something from a person isnt asking for it, just that from a legal viewpoint, it might not work that way. Dan McIntosh1960 Impala Sport CoupeStreet Metal

Re: [Chevelle-list] Chevelle Security

- From: Dan McIntosh I think convincing a jury that your vehicle is family, would be a hard sell. Not saying I dont agree that anyone who is willing to steal something from a person isnt asking for it, just that from a legal viewpoint, it might not work that way

Re: [Chevelle-list] Cold...

I go through a bit of a depression every winter.. :( theres snow on the ground in Cleveland from November to April usually Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Craig Ellis To:

Re: [Chevelle-list] Anyone home?

Hey now,don't bash them V-Dubbs, I happen to own a 73 Beetleg Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Tuesday, November 22,

[Chevelle-list] chevy bowtie dimensions?

hi all, im trying to make an AutoCad block for a chevy bowtie. Anyone happen to have the dimensions for one? i scoured the net and found tons of pics but no dimensions thank you. Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com

[Chevelle-list] dakota digital

Im looking for a dash for my 60 Impala. Does anyone know where to get the best pricing on the Dakota Digital stuff? Thank you. Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com

Re: [Chevelle-list] 66 on ebay

] To: The Chevelle Mailing List Sent: Tuesday, October 18, 2005 5:23 PM Subject: Re: [Chevelle-list] 66 on ebay Yeah? I noticed your watching it. In fact, an e-bayer called "Bigthedan" bid on it. I wonder. G-Original Message- From: Dan McIntosh <[EMAIL PR

Re: [Chevelle-list] pic link - finally finished.

I happen to like the lowrider look myself g Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Clint Hooper To: The Chevelle Mailing List Sent: Wednesday, October 05, 2005 2:27 PM Subject: Re:

Re: [Chevelle-list] pic link - finally finished.

can choose high or low,huh. g Clint HooperHH Custom,owner1969 El Camino ProTourer2001 H-D FLHR custom baggerhttp://dalesplace.com/misc/friends/clint/clint_hooper.htm - Original Message - From: Dan McIntosh I happen to like the lowrider look myself

Re: [Chevelle-list] selling parts to the UK??

yep, this is a scam email,I get these almost every day... Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: [EMAIL PROTECTED] To: The Chevelle Mailing List Sent: Sunday, October 02, 2005 11:30 AM

Re: [Chevelle-list] Muncie 4 Speeds

great advice! Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Clint Hooper To: The Chevelle Mailing List Sent: Sunday, October 02, 2005 8:33 PM Subject: Re: [Chevelle-list] Muncie 4 Speeds

Re: [Chevelle-list] wire ID please

Thank you John and Herb! I found the gear at the local Chevy dealer as Herb suggested, he had to order it as well but it was local, it seems GM is still making these things. Everything went back together much easier than it came apart, that's for sure! Dan McIntosh1960 Impala Sport

Re: OOPS!! [Chevelle-list] wire ID please

wow, wrong subject I replied to, how embarrassing, lol. Dan McIntosh1960 Impala Sport CoupeRollerz Only C.C.http://www.lowriderimpala.com - Original Message - From: Dan McIntosh To: The Chevelle Mailing List Sent: Monday, September 26, 2005 6:57 PM Subject: Re

[Chevelle-list] saginaw 4 speed speedometer gear

Hi all, Im in desperate need of the speedometer gear for a 4 speed saginaw trans, I have an out of state show that im leaving for on Friday and it seems that my plastic gear is stripped, rendering the speedo useless. If anyone has one of these laying around, can you please contact me off

Re: [Chevelle-list] saginaw 4 speed speedometer gear

I forgot to add, that this gear is the same on Muncie, M20, M21, M22, Saginaw, T5, T10 transmissions. My current tooth count is 20. Thank again Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Dan

Re: [Chevelle-list] saginaw 4 speed speedometer gear

- Original Message - From: Dan McIntosh To: chevelle-list@chevelles.net Sent: Sunday, September 25, 2005 7:53 PM Subject: [Chevelle-list] saginaw 4 speed speedometer gear Hi all, Im in desperate need

Re: [Chevelle-list] what paint for rear end?

POR-15 is very nice and shiny, and really durable. Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Wednesday, September 21, 2005 10:25 PM

Re: [Chevelle-list] More paint (off topic)

Homes404-427-8229On Aug 31, 2005, at 8:52 PM, Dan McIntosh wrote: Why not try to buff the car with a medium cut cleaner first, and see what happen?Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message -From

Re: [Chevelle-list] More paint (off topic)

Why not try to buff the car with a medium cut cleaner first, and see what happen? Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Gene's General Restoration Parts To: The Chevelle Mailing List

Re: [Chevelle-list] [chevelle] off topic maybe

If you're going through Cleveland I have a car frame that needs to go to Corpus Christi Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Jim Dos To: The Chevelle Mailing List Sent: Monday, August 29,

Re: [Chevelle-list] ID #s

V = Flint Engine Plant 05 = May 28 = 28th TYU = 1975 350cid 165hp 4bbl from a van or bus. Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: [EMAIL PROTECTED] To: chevelle-list@chevelles.net Sent:

Re: [Chevelle-list] Thanks for all the help!

I have a friend in Sweden, his name is Nicke, he builds really nice cars of all different styles. He's also the editor of the big skateboard mag over there. There definitely is a great kar kulture over there, I'd love to visit sometime. Dan McIntosh1960 Impala Sport CoupeStreet Metal

Re: [Chevelle-list] Dynamat or what?

lol, the pic you saw was my hotlink protection. I've had trouble with people using pictures from my site, on other websites, which uses loads of my bandwidth. If someone tries to hotlink a pic, the picture you seen, is what I have it set up to display, in hopes they will remove the hotlink.

Re: [Chevelle-list] fuel pump or carb?

- Original Message - From: Dan McIntosh To: chevelle-list@chevelles.net ; impala list ; Curt Ballsrud Sent: Sunday, July 31, 2005 8:31 PM Subject: [Chevelle-list] fuel pump or carb? Hi all, today I was out driving the 63, and it

Re: [Chevelle-list] Dynamat or what?

Hi Dan I used FatMat from ebay, it was about 100 dollars for 100 square feet. It really cut down on road noise. It was pretty user friendly, just make sure to wipe the surfaces down with acetone or something similar before applying it. Also, the roller they supplied was pure garbage, I'd

[Chevelle-list] fuel pump or carb part 2

Well guys, After school today, I removed the fuel pump from the motor, then took off the back plate so I could inspect the push rod. Everything with the pushrod looked good, and I stuck it in the hole and had the wife crank the motor while I pushed on it with my finger. It moved back and

Re: [Chevelle-list] Dynamat or what?

: Dan McIntosh [EMAIL PROTECTED]To: The Chevelle Mailing List Chevelle-list@chevelles.netSent: Mon, 1 Aug 2005 21:34:55 -0400Subject: Re: [Chevelle-list] Dynamat or what? Hi Dan I used FatMat from ebay, it was about 100 dollars for 100 square feet. It really cut down

Re: [Chevelle-list] Dynamat or what?

velles.net Sent: Monday, August 01, 2005 9:52 PM Subject: Re: [Chevelle-list] Dynamat or what? Dan, apparantly one of your picsof you licking your buddy was posted. har har har. -Original Message-----From: Dan McIntosh [EMAIL PROTECTED]To: The Chevelle Mailing Lis

[Chevelle-list] fuel pump or carb?

Hi all, today I was out driving the 63, and it started feeling like it had no power, bogging out and stuff, until it finally died on the side of the road. I had the wife bring me starting fluid, at which point it ran until the fluid dissipated. I took the line off the carb, removed the

Re: [Chevelle-list] fuel pump or carb?

The knocking noise was going on when I started it up today, before the stalling problem, almost sounds like it's from the carb. Remember, the front of my car bounces 30-40 inches in the air, so strange thing could happen. Now that I think about it, I was hopping it hard last time I drove

Re: [Chevelle-list] Recall

if it's a safety recall ( Im assuming seat belts fall under this category), they have to honor it. You can call and give them the VIN, and they'll know if it has had the recall work done or not. If you're the original owner, then you'd already know this though. Dan McIntosh1963 Impala SS

Re: [Chevelle-list] special request

Best of luck Brian, we're pulling for you. Dan McIntosh1963 Impala SS Convertible"HOP IT TILL IT BREAKS"Street Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Brian Knight To: Chevelle-list@chevelles.net Sent: Thursday, July 21, 2005

[Chevelle-list] 1970 El Camino Seats

I have a friend who is looking to replace the aftermarker "racing" seats in his 1970 Elky with a pair of the stock style seats. If anyone has a pair in decent shape, please let me know a price, including shipping to Cleveland Ohio. The color and the condition of the skins is not important,

Re: [Chevelle-list] For all u air baggers

haha, that was cool.. It's nice to see whereour tax dollars go. ;) Dan McIntosh1963 Impala SS Convertible"HOP IT TILL IT BREAKS"Street Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Richard M. Pruett To: chevelle-list@chevelles.net

Re: [Chevelle-list] First Paint Chip - Help on paint color

If it's a true kandy paint job, you'll never match it. If it's a solid color, take it to a local paint supply store, and they can use their machine to match the color. good luck! Dan McIntosh1963 Impala SS Convertible"HOP IT TILL IT BREAKS"Street Metal

Re: [Chevelle-list] Dan McIntosh

w.lowriderimpala.com - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Sunday, June 26, 2005 8:41 PM Subject: [Chevelle-list] Dan McIntosh Hey Dan Im notinto the lowrider scene,but when they are hopping them, when it comes down, i

Re: [Chevelle-list] Dan McIntosh

shttp://www.lowriderimpala.com - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Sunday, June 26, 2005 8:55 PM Subject: Re: [Chevelle-list] Dan McIntosh Dan, Well the whole lowrider thing is not my cup of tea perso

Re: [Chevelle-list] The Nut Behind The Wheel

When I read the subject line, I instantly assumed this email was about me. Dan McIntosh1963 Impala SS Convertible"HOP IT TILL IT BREAKS"Street Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Larry Shouse To: Chevelle List Sent:

Re: [Chevelle-list] 69 Camaro Convertible Body Shells Now Available!

What does something like that cost? Dan McIntosh1963 Impala SS Convertible"HOP IT TILL IT BREAKS"Street Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: John Nasta To: The Chevelle Mailing List Sent: Saturday, June 18, 2005 11:39 AM

Re: [Chevelle-list] Where will it end??

It happens alot in the lowrider field as well. It angers me to no end. The excuse is, that they would never try to sell it as a true SS, but I tell them, that that doesn't matter, because you know for a fact that the next guy will. I'm 30, (kinda not so young anymore) Friends don't let

[Chevelle-list] sbc running rough

Hi all, i have a 283 in my 63 Impala, and I'm having some issues getting it to run correctly. the main problem is, in park or neutral, it runs fine, with good to slightly high engine RPM's. But In drive, when I come to a stop, it wants to bog down and die due to the RPM's dropping super

Re: [Chevelle-list] carter AFB

Is the Carter electric choke? Any idea of the CFM? if it's a 600 electric choke, I'd be interested in it. Thank you. Dan McIntosh1963 Impala SS Convertible"HOP IT TILL IT BREAKS"Street Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: bob howard

Re: [Chevelle-list] Need help decoding SBC block numbers

CGC is a 1971 350 2bbl from either an El Camino, or a Full Size. As coincidence may have it, thats also the suffix code that was on the motor in my blue 64 Impala. V10219CGC The V stands for the Flint Michigan engine plant. there should be only 4 numbers between the V and the C, and those

Re: [Chevelle-list] Air Ride installation update

Shockwavesdon't collapse as much as the 2500 or 2600 series dual bellows bags. Clint, I would love to see a pic of your ride with the front lifted and the back dropped, and then a shot of the motor. The guys on my lowriderforum would get a really big kick out of it. Dan McIntosh1963

Re: [Chevelle-list] Air Ride installation

Hi Fellas, I installed air suspension on my old 64 Impala. While it was faster acting than what you'd use for a lowrod style setup, the idea is the same. Basically, all 4 coil springs are replaced with air bellows bags. On my 64, the ride quality was amazing. Even with the front shocks and

[Chevelle-list] Rear Sway Bar for sale

Hi All, I have a Addco rear sway bar that I purchased for my 65 and never got to install it before the vehicle was sold. It is a 1" diameter rear bar, and comes with all of the mounting hardware. If anyone is interested, contact me off list and I will send pictures. Thank you. Dan

[Chevelle-list] Intake Manifolds

Hi All, I'm looking for an intake manifold to replace the 2BBL unit on my 63 Impala. The stock one has the oil filler tube in the front of the intake. Seeing as how my Cal Custom valve covers have no hole to allow for adding oil, I would love to be able to find an intake that keeps the

Re: [Chevelle-list] Intake Manifolds

: [Chevelle-list] Intake Manifolds I have an Edelbrock TM-1 single plane manifold for a sbc with a hole in the front for oil, that I'm looking to get rid of. Let me know if you are interested. Tom Tomlinson - Original Message - From: Dan McIntosh

[Chevelle-list] Memphis Super Chevy Show

Anyone from the list go? There was a super nice convertible 65 Chevelle there, 2 tone, black and burnt orange. Dan McIntosh1963 Impala SS ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com

Re: [Chevelle-list] Just 64-72? was: New to the El Camino world (tell it like it is)

I joined when I had my 65 Malibu, but I've moved to impalas since then.. Everyone on here has still been personable to me and offered help when I had questions and not given me any SH%T when I asked a question. This is still and excellent resource, and alot of things that pertain to

Re: [Chevelle-list] New to the El Camino world

I think your font has caused me to go temporarily blind. Dan McIntosh1963 Impala SS ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: [EMAIL PROTECTED] To: Chevelle-list@chevelles.net Sent: Sunday, April 10, 2005 2:03 PM

Re: [Chevelle-list] For a living...

Automated Equipment Engineer by day, Lowrider by night. My new car will lift either front wheel 2 feet in the air with ease, lol. Dan McIntosh1963 Impala SS ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: [EMAIL PROTECTED]

Re: [Chevelle-list] Paint Metal Flake

Alot of lowriders still use flake. I just painted a motorcycle solid red flake. Took about 12 coats of clear to bury it all enough to be wetsanded out. It looks absolutely amazing though. House of Kolor has a very nice selection of flakes, as does OSF (Old School Flake) Good luck! Dan

Re: [Chevelle-list] Impala SS help

64 was the first year that the SS package was listed as a separate model, so it will be in the vin number. The first 3 digits should be 413 for a 6 cylinder car, and 414 for a v8 car. Good luck! Dan McIntosh1963 Impala SS ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com

Re: [Chevelle-list] Serpentine system on SBC

I'd say just make sure you have the appropriate accessory bolt holes on your 69 motor. Dan McIntosh1963 Impala SS ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Clint Hooper To: chevelle-list@chevelles.net Sent:

Re: [Chevelle-list] Painting

seem to want to come off… so I guess its not meant to stay on for longer then a few days or else it implants itself ;) -JB From: Dan McIntosh [mailto:[EMAIL PROTECTED] Sent: Saturday, March 12, 2005 9:37 PMTo: [EMAIL PROTECTED]; The Chevelle Mailing ListSubject

Re: [Chevelle-list] Paint Mixure

depends on the manufacturer, there is no "rule of thumb" when it comes to paint.. Dan McIntosh1963 Impala SS ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Crazy Rusty To: 'The Chevelle Mailing List' Sent: Sunday,

Re: [Chevelle-list] Paint Mixure

whose paint is it, maybe I have the tech ref here.. Dan McIntosh1963 Impala SS ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Crazy Rusty To: 'The Chevelle Mailing List' Sent: Sunday, March 06, 2005 1:32 PM

Re: [Chevelle-list] Paint Mixure

That's a very interesting fact there John. Do you think women looked at the size of a suitor's thumb before getting married back then? Dan McIntosh1963 Impala SS ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: John Nasta

Re: [Chevelle-list] RE: rare option

lol. My old Ford Ranger was equipped with a "highway divider wall" finder. On my way to work one morning, the front and rear finders came on, which must have, by default, activated the drivers side "Saturn SLY" finder. It all made for a great morning indeed. Dan McIntosh1963 Impala SS

[Chevelle-list] Cal Custom Valve Covers For Sale

Hi All, I have a really nice set of Cal Custom "Finned" valve covers for sale for 180 shipped. The aluminum is polished, and the area between the fins is painted red. they are for SBC, straight bolt pattern. If anyone is interested, please email me off list for pictures. Thank you. Dan

Re: [Chevelle-list] Body Off

If your handy with a welder, you can build a body dolly fairly easily. Dan McIntosh1963 Impala SS ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Ryan Langstraat To: Chevelle-list@chevelles.net Sent: Saturday,

Re: [Chevelle-list] hood ornament question

to sell. a popular one in our area was a Swan type bird with plasticwings in a V configuration. You could install a lamp in the base that defused the light through the solid base illuminating the wings... UGLY.. Wayne - Original Message - From: Dan

[Chevelle-list] hood ornament question

I have posted a picture of the hood ornament on my recently purchased 1963 Impala. Does anyone have any idea what this hood ornament is? Looks like a J.C. Whitney special to me, lol. http://www.lowriderimpala.com/63.html Thank you. Dan McIntosh1963 Impala SS ConvertibleStreet Metal

Re: [Chevelle-list] My 1962 Impala for sale on ebay

: Thursday, February 10, 2005 6:18 AM Subject: Re: [Chevelle-list] My 1962 Impala for sale on ebay Hey Dan, How about a link. Rich - Original Message - From: Dan McIntosh To: impala list ; chevelle-list@chevelles.net Sent: Wednesday

[Chevelle-list] My 1962 Impala for sale on ebay

Trying to sell this car to fund another project. It is located in Cleveland Ohio. I am negotiable on the price if anyone is interested. Thank you. Dan McIntosh1962 ImpalaStreet Metal Fabricationshttp://www.lowriderimpala.com

Re: [Chevelle-list] First ride

That's awesome! Congrats on the new addition to your family. Dan McIntosh1962 Impala Rollerz Only C.C.http://www.lowriderimpala.com - Original Message - From: suprsprt72 To: The Chevelle Mailing List Sent: Thursday, February 03, 2005 4:15 PM Subject: Re:

Re: [Chevelle-list] Splice or Solder

I'd like to suggest the use of a heat shrink tube wherever possible, in lieu of the electrical tape. Dan McIntosh1962 ImpalaStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Krister Meister To: The Chevelle Mailing List Cc:

Re: [Chevelle-list] Splice or Solder

Great answer! Dan McIntosh1962 ImpalaStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: Mike Sanders K0AZ To: Rick Schaefer ; The Chevelle Mailing List Sent: Saturday, December 18, 2004 2:38 PM Subject: RE: [Chevelle-list] Splice

Re: [Chevelle-list] (no subject)

According to my book, 66 and 67 frames are interchangeable. Wagons, Drop tops, and El Caminos, are interchangeable with each other. But a car needs a car frame. Dan McIntosh1962 ImpalaStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: sparky

Re: [Chevelle-list] Extra gas

I used to swim in raw sewage when I was a kid, they told me it was a river, I knew it stunk, but never asked why. People today worry too much about everything. 1 guy on the news has a freak accident and everyone gets scared. Keep on doin' it like your used to! Dan McIntosh1962 ImpalaStreet

[Chevelle-list] request

please send me the unsubscribe instructions please, lol. thanks Dan McIntosh1962 ImpalaStreet Metal Fabricationshttp://www.lowriderimpala.com

Re: [Chevelle-list] request

thank you :-) Dan McIntosh1962 Impala Rollerz Only C.C.http://www.lowriderimpala.com - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, December 03, 2004 9:44 PM Subject: Re: [Chevelle-list] request To unsubscribe from this

[Chevelle-list] OT: 700R4 trans

Howdy all. I just purchased a car with the 700R4 trans, and I've installed 13" rims and tires on it, lol. Problem is, at highway speeds, it constantly shifts back and forth between 3rd and 4th gear. Any way to override that with a switch or something so I can lock it in 4th at highway

Re: [Chevelle-list] OT: 700R4 trans

haha, when I'm doing like 65, the speedo reads 85. Dan McIntosh1962 ImpalaStreet Metal Fabricationshttp://www.lowriderimpala.com - Original Message - From: [EMAIL PROTECTED] To: The Chevelle Mailing List Sent: Monday, November 29, 2004 8:42 PM Subject: Re:

  1   2   3   4   5   >