-
From: John Nasta [EMAIL PROTECTED]
To: chevelle-list@chevelles.net
Sent: Thu, 15 May 2008 7:20 pm
Subject: [Chevelle-list] rear tranny seal
I finally got around to changing my rear tranny seal today. I had an
opportunity to use a friend's garage rather than lying in the street, so I
carpe'd
I finally got around to changing my rear tranny seal today. I had an
opportunity to use a friend's garage rather than lying in the street,
so I carpe'd the diem.
I just want to pass on to you guys that the trick I found that worked
for me was to punch right through metal of the old seal as
I need to replace my rear tranny seal. It is a TH350 from a 70 Chevelle. My
local parts guy says he is showing three different shaft sizes but one of
the three comes up much more often in his sales history, meaning that it is
either the most popular size *(or just the one that wears out the
Can you pull the seal and then take it to the shop?
Should be easier to nail down that way.
Jim
'66 Malibu
--- John Nasta [EMAIL PROTECTED] wrote:
I need to replace my rear tranny seal. It is a TH350
from a 70 Chevelle. My
local parts guy says he is showing three different
shaft sizes but
Take the tail shaft off the trans, only 4 bolts hold it on, just make sure
you get a new O ring for it. There are 2 seals, 1 is for the TH400/M22,
the other is for TH350/PG.
Tom
5 matches
Mail list logo
