This is not a change after the upgrade to 4.1. This is a sudden state. Why does
the server not respond to packets? In addition, the chronyd service is normal,
and three request packets are displayed. I only intercepted three request
packets, and no response packet is received. This is strange.
I am not really going underground, but it will be used below a surface that
will cover the gps signal (I tested the conditions already).
I don’t have a temperature controlled RTC and I won’t test it at different
temps (I don’t have time). I would say that knowing the gps time at ms level is
On Tue, Nov 15, 2022 at 12:26:14PM +, chengyechun wrote:
> Hi all:
> When I use chrony-4.1 to synchronize time, the configuration is normal.
> However, the response packets are different. Is it because the value of
> /var/lib/chrony/drift is too large? Why is no error displayed in this case?
Hi all:
When I use chrony-4.1 to synchronize time, the configuration is normal.
However, the response packets are different. Is it because the value of
/var/lib/chrony/drift is too large? Why is no error displayed in this case? The
status of the server is as follows:
● chronyd.service - NTP