Take the exam on the 5th. If you need to rely on others to break the NDA
before you can pass (as Chuck suggests), then you don't deserve the
certification anyway. None of this stuff is Rocket Science.
Gene Volpe wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I have my lab
Here are the configs from two sites.
Basically I have 370xx and 379xx extensions assigned to Site A and 79xx
assigned to Site B. All calls from Site A are going thru without any
problem. Site B, however cannot make a call out to Site A. I thought maybe
the 5-digit extensions at Site A and
Try area 0. I think it will work.
thinkworker wrote: I think it is ur misconfiguration on the interfaces.
In fact, OSPF will not need a 'backbond' is there is only one area.
On Wed, 10 Jul 2002 04:18:45 GMT
John Brandis wrote:
I have the following error whilst playing with OSPF
Site A
voice-card 1
!
ip subnet-zero
no ip source-route
no ip finger
!
lane client flush
!
!
controller T1 1/0
framing esf
linecode b8zs
ds0-group 1 timeslots 1-24 type em-wink-start
cas-custom 1
!
!
voice-port 1/0:1
operation 4-wire
!
!
dial-peer voice 1 pots
destination-pattern 370..
Hi all,
I am trying to perform a Nat on the destination IP address.
I have a PIX holding the 6.2 OS Version.
I know Destination Natting can be achieved by using the alias command but I
have to configure an alias which will translate two different D. IP
addresses to a single one.
Help on the I
I need to know from where I can get cables DB60 back to back to connect two
routers directly
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48755t=48755
--
FAQ, list archives, and subscription info:
One of your routers should act as DTE end and the other should act as DCE
end. To accomplish this you need two cables and as an example you can use
one V35-MT (for DTE end) and one V35-FC (for DCE end).
___
Fathalla A. Fathalla
International Turnkey
Try
www.kg2.com
They have pretty reasonable prices.
HTH
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48757t=48755
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
Gil,
PIX version 6.2 supports Bi-Directional NAT. You no longer need to use the
alias command.
Have a look...
Bi-Directional Network Address Translation (NAT)
PIX Firewall software version 6.2 allows Network Address Translation (NAT)
of external source IP addresses for packets traveling from
Hi Group,
199.172.1.0 / 24 --- RTA --- RTB --- RTC
RTA's interface - 172.17.1.2 (connecting to RTB)
RTB's interface - 172.17.1.1 (connecting to RTA)
RTB's interface - 10.1.1.1 (connecting to RTC)
RTC's interface - 10.1.1.2 (connecting to RTB)
RTA is in AS 1
RTB RTC are both in AS 2
I
Team,
I just got my new baby Pix 501 (wow...how small it is, it looks like a
toy)Below is my configuration, my problem is that Pat does not seems to
be able to work, I have cable-modem and they only provided one ip, I am able
to ping from the firewall to any pc on my LAN, I am able to ping
Hello Michael,
If the new beta exam (351-001) will have its number changed
to 350-001 how would you know for sure if you're going to
take the new/old one? I mean. I called Prometric and they
said you're able to register for the 350-001 even after
August 1st (Maybe the registration date?). I
I have a cisco TFTP Server v 1.1, It is creating some problems
with my XP Machine.
Is there a better TFTP Server or is there a better Version
Available.
Regards,
Muhammad Usman
Network Engineer
al Alamiah Electronics Co.
Network Section
www.alamiah.com.sa
Tel. : (+966-1) 477 0106
Hi,
I have a 2501 and I want to upgrade the software through my
hyperterminal session, how can I do that if the router does not go to
rommon mode..
Regards,
Muhammad Usman
Network Engineer
al Alamiah Electronics Co.
Network Section
www.alamiah.com.sa
Tel. : (+966-1) 477
At 7:48 AM + 7/14/02, The_Jester wrote:
Take the exam on the 5th. If you need to rely on others to break the NDA
before you can pass (as Chuck suggests), then you don't deserve the
certification anyway. None of this stuff is Rocket Science.
Years ago, I was teaching a networking seminar at
I have used the CCNP Simulator from RouterSim.com and am pleased with it's
performance. They also have a Switch Simulator as well... I used an older
version of the Router Sim when studying for my CCNA and it worked Great...
It is very inexpensive in my opinion when compared with the real
Muhammad Usman wrote:
I have a 2501 and I want to upgrade the software through my
hyperterminal session, how can I do that if the router does not go to
rommon mode..
Even if it did, you still would be unable to do what you want. A 2500
doesn't do Xmodem software upload (which
I'd do some dubugs like debug voice ccapi inout to see what numbers are
being sent to the PBX and across the IP call leg (on both sides).
I'd also try to validate your dialing plan by doing a show dialplan number
(DN you wish to test) to see whci dial-peer the router thinks it should be
using.
Hi;
How to suscribe to the groupstudy
Regards
Youcef
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
why not do the lab?
At 03:27 AM 7/14/2002 -0700, you wrote:
I've run out of Labs :o
I'm not a dirtbag who's trying to copyright
infringe or get something for free.
I have paid and done :
CCIE BOOT
Ccie PRACTICAL STUDIES
Routopia
Fatkid
Doyle, Cisco Press
And have played the What If game w/
Hi Brad,
Thanks for the information. I can see that 2514s would be a better choice
then 2513s with token ring being removed from Cisco testing.
As far as the 3550, are you talking about the WS-C3550-24-EMI 24 10/100
ports and 2 GBIC-based Gigabit Ethernet ports switch?
I have a 3640 and have
Oh yeahI forgot to mention that if you want to ping the world from your
LAN, you'll also need to add an outside access list, like:
access-list acl_outside permit icmp any any echo-reply
access-group acl_outside in interface outside
Sorry about leaving that out of the first message.
Craig
I got some on ebay not too long ago $16 each
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48779t=48755
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
You can install it under any win2k server if you know the tricks of the
trade.
supernet - why dont you play with it and see what happens. that's the best
way to learn!
thanks,
-Brad Ellis
CCIE#5796 (RS / Security)
Network Learning Inc
[EMAIL PROTECTED]
www.optsys.net (Cisco hardware)
Rex Chan
You need to setup access lists for inside and outside traffic.
Assuming that you're just playing with this at home, only want to allow
established traffic into your network, and want to let all traffic out of
your LAN to the world, do something like:
access-list acl_inside permit ip any any
Hey all I would like to get some PIX experience we use checkpoint at
work, but I want to take a stab at the security track. Would the 501 be
enough to get some good experience for the exam. Notice most important
is experience not just passing the cert.
Thank you for your replies in advance.
What kind of problems is it creating?
In the TFTP program, under VIEW, and then OPTIONS, try DISABLING the show
file transfer progress as well as DISABLING Enable Logging
thanks,
-Brad Ellis
CCIE#5796 (RS / Security)
Network Learning Inc
[EMAIL PROTECTED]
www.optsys.net (Cisco hardware)
Michael L. Williams wrote:
If you're NOT new to Groupstudy, then feel free take offense at my comment
because you haven't been watching very closely if you're asking about the
new R/S exam this late in the game... =)
No offense taken. I'm only here to learn and to better my chances of
Hi everybody; I have Cisco3661 ,connected to PRI line ( with NM-1CE1B)
and also It has WIC-BRI S/T card. Is it possible to connect the Video
Conferencing unit (via S/T port) to Cisco's S/T card and call to other
video conferencing unit via PRI line...Note: This is usually done via PBX
( PRI to
Thanks very much to Howard, Carl Alain for your time clear
explanation. I've included your explanations in my study notes :)
Blitz
In article , [EMAIL PROTECTED]
says...
Hi All,
Currently I'm preparing for DQoS exam for IPTel.
One of the exam topic is: explain the difference between
Hello everyone
I am trying to connect 2 routers back-to-back. One is a 2501 and the other
is a 2502. I have a dte to dce cable connected to the 2. Sometimes they
see
each other but not long enough to make connectivity. I have set the
dce-terminal-timing enable and the clock rate on the one
Yup, the Pix 501 will run the latest and greatest OS, so that should do the
trick for you.
thanks,
-Brad Ellis
CCIE#5796 (RS / Security)
[EMAIL PROTECTED]
Cisco home labs: www.optsys.net
Elijah Savage III wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hey all I would like to
Just use clock rate on the interface w/ dce ('show
controllers' if you're not sure).
Dce-terminal-timing is for high-speed/long distance, no? You
don't have that w/ routers back-to-back.
Rich
[EMAIL PROTECTED] wrote:
Hello everyone
I am trying to connect 2 routers back-to-back. One is
I really like PumpKIN found at:
http://www.klever.net/kin/pumpkin.html
Charles
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 14, 2002 7:39 AM
To: [EMAIL PROTECTED]
Subject: TFTP Server [7:48763]
I have a cisco TFTP Server v 1.1, It is
From what I can see on Ciscos' site, you can order two varieties of the 24
port 3550.
WS-C3550-24-SMI (Standard Multilayer SW Image)
or
WS-C3550-24-EMI (Enhanced Multilayer SW Image)
Since there is a hefty difference in price, does anyone know for sure which
one will be used in the lab?
Mohammed Saro wrote:
I need to know from where I can get cables DB60 back to back to
connect two
routers directly
Bob at router-rip.com does a great job with Cisco cables of all sorts. I
have used him and been pleased with the service.
Priscilla
The EMI will be used. The SMI/EMI switches are the same physically. It is
just a different IOS image.
Dan
Al Walter wrote:
From what I can see on Ciscos' site, you can order two
varieties of the 24
port 3550.
WS-C3550-24-SMI (Standard Multilayer SW Image)
or
WS-C3550-24-EMI
The point I was trying to make is that the subject matter is not
so hard that one needs to cheat to pass.
Howard C. Berkowitz wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
At 7:48 AM + 7/14/02, The_Jester wrote:
Take the exam on the 5th. If you need to rely on others to
3com has a great one
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48792t=48763
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
www.pacificcable.com
Priscilla Oppenheimer 07/14/02 05:12PM
Mohammed Saro wrote:
I need to know from where I can get cables DB60 back to back to
connect two
routers directly
Bob at router-rip.com does a great job with Cisco cables of all sorts. I
have used him and been pleased with the
Dear All,
I have VIC-2E1 on 2600 and MC3810 with MFT T1, does anyone know how to
connect it up in home lab? Any extra equipment I need?
TIA
Fanglo
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48795t=48795
--
FAQ, list
Hi Steve
Here is an extract from the config - access-list 100 controls traffic from
the untrusted section of the company being migrated.
firewall is the name of the ip inspect policy
interface Ethernet0/0
description Sydney Local Ethernet Segment
ip address 172.25.201.1 255.255.0.0
no
not enough info to tell
Need more of the config.
Dennis Cooper wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi Steve
Here is an extract from the config - access-list 100 controls traffic from
the untrusted section of the company being migrated.
firewall is the name of
Tom,
I made a copy of the outline for the new RS exam... but I think it's @
work... so I'll look for it there and forward it on to you.
Mike W.
Tom Scott wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Michael L. Williams wrote:
If you're NOT new to Groupstudy, then feel
Al, I was in the CCIE Power session at Networkers on Friday and without a
doubt you need the EMI version. To use their words They will now have a 24
port router. The EMI version is the only version that does Layer 3 switching.
Message Posted at:
You should go ahead and take it on the Nov.5. Just make sure you spend some
time working on the 3550 EMI. There will be two of them in each pod and you
will have to route between VLANs. The good new is that you will not have to
do any CatIOS (simple but still).
Message Posted at:
You might want to check into it but I believe the 3548 comes standard wil
SMI but you can upgrade it to EMI. You will have the do L3 functions after
Nov. 4.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48801t=48695
--
FAQ, list
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
!
hostname firewall
!
boot system flash c3620-io-mz.120-3.T3.bin
logging buffered 10 debugging
enable secret 5 $1$hqZ4$k9Mvt5yfvbpipYmFGbTSS/
We are running Cisco IOS 12.07 T-code as show below on our Cisco 3640
router.
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-I-M), Version 12.0(7)T2, RELEASE SOFTWARE
(fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled
Dear cisco greats,
A basic question . How do you connect 2 routers back to back. As we all
know router is a DTE device. Is it enough if we enable one of the
connected interface on one router with the Clock rate command OR is
there anything else we need to do ? Please explain ???/
go to www.cisco.com and search for dte to dce
that will give you all the answers.
http://www.cisco.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48805t=48804
--
FAQ, list archives, and subscription info:
Hi all
Is it possible to set a timeout on a Pix so that if for instance, say an
FTP session was left unattended for X minutes ... the Pix will close this
session ?? I know you can set Uauth Timeouts so that a user has to logon with
their credentials after a set amount of inactivity, but
That's what I thought.
ccbootcamp.com's hardware site(optsys.net) is advertising brand new 3550s
for around $2300. That price leads me to believe that they are selling the
SMI version.
I'll call Brad on Monday and see what it is they are actually selling.
Thanks,
Al
Penn Daniel wrote in
check out the following to get an idea of the street price for the various
flavors:
http://www.nextag.com/
do a search on Cisco 3550 and then check the price ranges shown.
street for the 3550-24-SMI runs 2000-2500, while street for the 3550-24-EMI
runs 3350-4300
That Auction Site has had a
On Sat, Jul 13, 2002 at 08:13:02AM +, Ross Wood wrote:
At the moment I am doing a design project for my CCNA classes. But I am
having some problems. I have chosen the 3550-48 3550-24 switches and was
wondering what kind of router I should choose. Most of the routers only
have
10/100
Well, combine all of this with the fac that application support is still
lacking.
Yes, Winblows XP does have it but it is rough.
Anyone know of any IPv6 software calculators? I like to doublecheck myself
since IPv6 is taking alittle getting used to.
I got my /48 from UUnet and now I am ready to
Hi All,
I have got a 1750 Router. While switching on the router
comes to rommon prompt and i am getting the following error
message.
rommon 3
bus error while trying to access flash - addr = 0x6000
cannot read flash info
getdevnum warning: device flash has size of zero
bus error while
Where did you hear that there were going to be two switches per rack? How
do you know you won't have to do any CatIOS?? Please enlighten me
ThanksThornton Hopkins wrote:
You should go ahead and take it on the Nov.5. Just make sure
you spend some time working on the 3550 EMI. There will
For those who were able to attend, do you have any comments about the power
session. Any tidbits about the change in lab. In particular I am curious for
budget purposes if we can get away with just one layer 3 switch and one
layer 2 switch for mock up labs, OR will TWO layer 3 switches be highly
I am upgrading my 2600s. 16/16 is ideal for 2500s (for enterprise image,
resale value, ect...). Is there a simular preference for 2600s? Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=48812t=48812
--
FAQ, list archives,
60 matches
Mail list logo
