A few posts now have mentioned adding routes from one router to the other
without anyone commenting on it.
What would the route be? Next hop on a different subnet?
Am I losing it, or is it just wrong?
Surely the only solution is to put the two interfaces in the same subnet?
Gaz
wrote in mess
What routing protocol are you using? What does the "sh ip rou" command
display for you?
ccie1ab
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
James gruggett
Sent: Thursday, November 29, 2001 5:54 PM
To: [EMAIL PROTECTED]
Subject: 2500 Router problem
Hi,
You can see that Router 2 is on a different subnet other than Router 1 and
I also guess you do not have a route defined from one Router to the other.
Either give Router 2 an IP address on network 192.168.1.n (or give Router 1
an IP address on network 192.168.2.n---both interfaces must be on t
The IP adress of router 2 needs to be changed.
Try 192.168.1.4 255.255.255.0
Thats what I would do..
This wuld put it on the same subnet.
-Anil
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
James gruggett
Sent: Thursday, November 29, 2001 5:54 PM
To
The ethernet IP addresses on your routers must be in the same subnet.
Remember that it's generally a good idea to have all devices that are on
the same shared medium in the same subnet.
>From the looks of it, you should probably change the IP address of R2
to 192.168.1.2/24.
Or, alternately, yo
Hello James,
Since your router 2 IP is on a different subnet you need to have either
routes set up; or run some kind of routing protocol.
Alex
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27696&t=27695
--
FAQ, list archives, a
6 matches
Mail list logo
