XR has been having it for years, but they are slow at adding it to all sections
in the configuration. prefix-sets, route-policies, as-sets have had it for some
time as well as ACLs, but there is a lot more too be done, unfortunately.
Best Regards
Ted
> On 2 Sep 2020, at 23:47, aar...@gvtc.com
There is a little bit of this on NXOS now - just a bit more each release, like
tabbing out man-made prefix lists
From: cisco-nsp On Behalf Of aar...@gvtc.com
Sent: Wednesday, September 2, 2020 5:44 PM
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] cli auto-complete on configured names
This
RP/0/0/CPU0:r22#sh mpls traffic-eng tunnels name ?
r22--->r20 Tunnel name (if contains space, enclose name with " ")
r20--->r22 Tunnel name (if contains space, enclose name with " ")
r25_t101Tunnel name (if contains space, enclose name with " ")
WORDTunnel name (if
good luck
On Wednesday, September 2, 2020, Drew Weaver wrote:
> Nevermind, I think I found it.
>
> There is a tiny tmp partition called /nxos/tmp that is full.
>
> Thanks anyway,
> -Drew
>
>
> -Original Message-
> From: cisco-nsp On Behalf Of Drew
> Weaver
> Sent: Wednesday, September
Nevermind, I think I found it.
There is a tiny tmp partition called /nxos/tmp that is full.
Thanks anyway,
-Drew
-Original Message-
From: cisco-nsp On Behalf Of Drew Weaver
Sent: Wednesday, September 2, 2020 1:58 PM
To: 'Aaron'
Cc: 'cisco-nsp@puck.nether.net'
Subject: Re: [c-nsp]
Howdy and thanks for replying.
So the switch is running 7.0(3)I1(3)
According to docs:
Upgrading from Cisco NX-OS Release 7.0(3)1(2), Release 7.0(3)I1(3), or Release
7.0(3)I1(3a), requires installing a patch for Cisco Nexus 9500 platform
switches only. For more information on the upgrade
Check to see if you have to upgrade to an intermediate version first. There
was an issue that would brick the switch if you tried to go straight to the
latest version.
On Wed, Sep 2, 2020 at 8:54 AM Drew Weaver wrote:
> Hello,
>
> Current version: 7.0(3)I1(3)
>
> Upgrading a 9508:
>
> Checked
Hello,
Current version: 7.0(3)I1(3)
Upgrading a 9508:
Checked for errata and it said something about bios upgrades failing due to the
bootrom monitoring so I set this:
diagnostic monitor interval module 1 test PrimaryBootROM hour 23 min 59 second
59
diagnostic monitor interval module 2 test
Correction on one of those statementsI think the affinity mask default
of 0x actually means 0x
Which seems to make sense in my observations, that I could set the link
attributes to anything in the top 4 hex characters and it didn't affect the
tunnel but if I change so much as