Greetings all I am trying to configure CFM using simple topology with xconnect as L2VPN service. CE1 - PE2 - PE3 - CE7
ethernet cfm ieee ethernet cfm global ethernet cfm traceroute cache ethernet cfm alarm notification all ethernet cfm domain SPCOR_DOMAIN level 7 service EVC_SRVC evc EVC1 mep mpid 170 mip auto-create ! ethernet evc EVC1 oam protocol cfm domain SPCOR_DOMAIN interface GigabitEthernet1 no ip address negotiation auto no mop enabled no mop sysid service instance 10 ethernet EVC1 encapsulation dot1q 17 xconnect 10.1.100.3 17 encapsulation mpls cfm mep domain SPCOR_DOMAIN mpid 170 For local learning , am able to get the information. PE2#show ethernet cfm maintenance-points local Local MEPs: -------------------------------------------------------------------------------- MPID Domain Name Lvl MacAddress Type CC Ofld Domain Id Dir Port Id MA Name SrvcInst Source EVC name -------------------------------------------------------------------------------- 170 SPCOR_DOMAIN 7 001e.f636.e6bf XCON I No SPCOR_DOMAIN Up Gi1 N/A EVC_SRVC 10 Static EVC1 Total Local MEPs: 1 Local MIPs: None But am not able to get any remote information. PE2#show ethernet cfm maintenance-points remote PE2# PE2#ping ethernet mpid 170 domain SPCOR_DOMAIN service EVC_SRVC % No RMEP entry found in for mpid 170 at domain SPCOR_DOMAIN service EVC_SRVC, evc EVC1. Any lights would be appreciated. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/