Re: [c-nsp] Unable to transmit tagged frames over q-in-q tunnel

Try setting the MTU to 1520 and enabling jumbo frames if you can. I had the same issue with q-in-q not passing dot1q and changing the mtu to 1520 solved it. --- Brian Raaen Network Architect Zcorum On Thu, Oct 27, 2011 at 06:28:36PM +0200, Gökhan Gümüş wrote: Dear folks, I have an issue

[c-nsp] Limiting Tacacs groups per device - Solved

.* clear cable modem .* clear counters [rancid_access] host_allow = $rancid_host device_permit = .* command_permit = show.* dir.* more.* write t.* --- Brian Raaen Network Architect ZCorum bra...@zcorum.com

Re: [c-nsp] Limiting Tacacs groups per device

access to most customer equipment, just limited access to a few exception customers. If there is a way a person can be a member of two groups at the same time then I could use your example to ACL the Special set of devices. --- Brian Raaen Network Architect ZCorum bra...@zcorum.com

[c-nsp] Limiting Tacacs groups per device

a tacacs server using tac_plus and I am unsure of best way to implement this functionality. I see some information about pre or post authentication scripts but clear cut information is a bit hard to find. --- Brian Raaen Network Architect Zcorum bra...@zcorum.com

[c-nsp] Legitimate Access to IOS for Legacy/EOL devices

I was wondering if there was any legitimate way to get access to IOS for legacy devices. I have a 2611, 3725 and pair of 2950's in my home lab that I would like to test some things on. Thanks --- Brian Raaen ___ cisco-nsp mailing list cisco-nsp

[c-nsp] RANCID problem with 10K CMTS

attached an example of the changes below. - !Flash: disk0: 1 -rw- 0 Nov 4 2010 06:11:16 -07:00 sflog + !Flash: disk0: 1 -rw- 0 Nov 4 2010 07:04:10 -07:00 sflog --- Brian Raaen Network Architech ___ cisco-nsp mailing

Re: [c-nsp] CN=Jesus Leung/OU=AHM/OU=AM/O=HONDA is out of the office.

This is the 6th time your auto-responder has replied to this list, please fix your vacation settings. On Wednesday 19 May 2010 01:00:56 pm jesus_le...@ahm.honda.com wrote: I will be out of the office starting 05/19/2010 and will not return until 05/24/2010. I will respond to your message

Re: [c-nsp] REAL Cisco 2960 bugs

When my boss saw this, he said these kind of bugs are resolved by the proper use of RAID(TM). -- -- Brian Raaen Network Engineer bra...@zcorum.com On Friday 09 April 2010, Jan Gregor wrote: Fan1 is not rotating: http://www.chronix.org/muchy/ Enjoy :). Best regards

Re: [c-nsp] NAT-Device with authentication ?

Try searching for Document ID: 13890. It is about setting up auth-proxy with nat. If you can't find it I can send you a pdf I had downloaded. -- -- Brian Raaen Network Engineer bra...@zcorum.com On Wednesday 16 December 2009, Andreas Mueller wrote: Hello

Re: [c-nsp] ipv6 cheat sheet

My boss found the following cheatsheet. http://www.estoile.com/links/ipv6.pdf also have a look at the following http://www.estoile.com/ -- -- Brian Raaen Network Engineer bra...@zcorum.com Tel 678-507-5000x5574 On Wednesday 25 November 2009, Good One wrote: Hello

Re: [c-nsp] juniper trinity

to the reader. -- -- Brian Raaen Network Engineer bra...@zcorum.com On Friday 23 October 2009, Richard A Steenbergen wrote: On Fri, Oct 23, 2009 at 07:21:33AM -0700, Marlon Duksa wrote: Hi, does anyone know what is this all about: http://www.forbes.com/2009/10/21/cisco

[c-nsp] Problems setting PPPo(AE) on 7606

. -- - Brian Raaen Network Engineer email: /bra...@zcorum.com/ mailto:bra...@zcorum.com ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/

Re: [c-nsp] Etherchannel between 2x2960 and 1x7600

Are the 2960's in a stack, and you are trying to terminate an etherchannel for the stack? I'd have to double check but, I believe that I have this set up on a 7200 that is termination PPPoE. luismi wrote: Hi all, I would like to know if it is possible to create an etherchannel between just 1

Re: [c-nsp] Multilink PPP Was - Re: Balancing T1's with CEF

/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ -- - Brian Raaen Network Engineer email: /bra...@zcorum.com/ mailto:bra...@zcorum.com Telephone /678-507-5000x5574

Re: [c-nsp] Cisco ASA digital certificate

https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ -- - Brian Raaen Network Engineer email: /bra...@zcorum.com/ mailto:bra...@zcorum.com Telephone /678-507-5000x5574/ ___ cisco

Re: [c-nsp] Port debugging on C2924

Have you tried setting up rspan http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_19_ea1/configuration/guide/swspan.html -- - Brian Raaen Network Engineer email: /bra...@zcorum.com/ mailto:bra...@zcorum.com Tuc at T-B-O-H wrote: Hi, Has

Re: [c-nsp] Lightweight Radius Server for small installation and Windows

You would set up a second account for their VPN then. In IAS you can set it to only authenticate if certain attributes match. Marc Haber wrote: On Wed, May 06, 2009 at 06:55:21AM -0400, Patrick J Greene wrote: The Windows server platform includes Internet Authentication Services (IAS)

Re: [c-nsp] Lightweight Radius Server for small installation and Windows

which is included with the default license. -- - Brian Raaen Network Engineer email: /bra...@zcorum.com/ mailto:bra...@zcorum.com Patrick J Greene wrote: The Windows server platform includes Internet Authentication Services (IAS) which provides RADIUS authentication against either

Re: [c-nsp] Using SNMP to determine BGP neighbor received route count

yes there is, You can find the information in the BGP4-MIB.my file which you can download using anonymous ftp to ftp.cisco.com. Chris Phillips wrote: Is there an SNMP MIB that can be used to determine a BGP neighbor's received route count? Thanks in advance. -- - Brian

Re: [c-nsp] Names of various cisco operating systems

If you ftp to (ftp.cisco.com), you can download all Cisco's MIB data over anonymous ftp. They would be contained in those files. Alternately, you could try using the search function on Cisco's web site.-- - Brian Raaen Network Engineer email: /bra...@zcorum.com/ mailto:bra

Re: [c-nsp] PPPoA Sessions MRTG

. - -- - - Brian Raaen Network Engineer email: bra...@zcorum.com Mohammad Khalil wrote: Hey all , im using MRTG for monitoring our network devices traffic. i faced a problem of how to draw PPPoA sessions as it dont have an OID like PPPoE we have a router with 2 PPP customers : PPPoA

[c-nsp] Ways to Log IRB DHCP Leases

am unable to convert this part of the network to RBE since they are using integrated set-top boxes on a Motorola Nextlevel based system. -- Brian Raaen Network Engineer bra...@zcorum.com ___ cisco-nsp mailing list cisco-nsp

[c-nsp] Setting up Cisco 1811 for dial in access

the router to provide access to the local network through a ppp dial in connection. Thank you for your help. -- Brian Raaen Network Engineer [EMAIL PROTECTED] ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net

Re: [c-nsp] Metro Ethernet CPE

pleased with it. I am not sure about the exact price, but they are somewhere around $600 for the wired and about $800 for the wireless. Hope this helps. -- Brian Raaen Network Engineer [EMAIL PROTECTED] On Wednesday 29 October 2008, FAHAD ALI KHAN wrote: Guys...! We