use cacti + reportit plugin and you are done.
On Nov 26, 2010 5:46 PM, John Neiberger jneiber...@gmail.com wrote:
I'd like to periodically (weekly, for example) gather certain
interface stats via show int and then upload those stats via
ftp/tftp/scp or whatever to a server. I'll then pull those
On Mon, 8 Mar 2010 10:41:07 +0530
jack daniels jckdaniel...@gmail.com wrote:
Hi guys,
I have been working on 7613 and 6500 devices implementations.But I
always have a confusion on -
CEF720 and DCEF720 cards.
1) how to identitify if the card is CEF720 or DCEF720
show module all will tell in
just a thought :
sh ip bgp neighbors | i Datagrams
maybe one router tries to negotiate the session with low datagram size
and the update storm floods the connection.
On Fri, 22 Jan 2010 02:06:53 +0100
Andy B. globic...@gmail.com wrote:
Hi,
here we go:
Core router that is causing headaches:
Gert Doering wrote:
Hi,
On Mon, Nov 09, 2009 at 07:55:43AM +0100, Gergely Antal wrote:
Did you look at the c2350 also?
http://www.cisco.com/en/US/products/ps10116/index.html
The data sheet sounds very nice indeed.
What I can't see from there is:
- does it support flow-control?
sh
Gert Doering wrote:
Hi,
On Mon, Nov 09, 2009 at 10:30:07AM +0100, Gergely Antal wrote:
On Mon, Nov 09, 2009 at 07:55:43AM +0100, Gergely Antal wrote:
Did you look at the c2350 also?
http://www.cisco.com/en/US/products/ps10116/index.html
The data sheet sounds very nice indeed.
What I
Did you look at the c2350 also?
http://www.cisco.com/en/US/products/ps10116/index.html
Brian Landers wrote:
I realize this is cisco-nsp, but does anyone have any opinions on the Force
10 S-series for top-of-rack? Especially for iSCSI SAN. I've long been
frustrated with Cisco's lack of a
sh inventory raw...
like:
NAME: Switch 1 - Power Supply, DESCR: FRU Power Supply
PID: C3K-PWR-265WAC, VID: V01, SN:
Vikas Sharma wrote:
Hi,
Is there any command on 3750 (e and non-E) switches which can tell
whether the power is AC or DC in the box? Like in 7206 we have sh
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/routmap.html
Manaf Al Oqlah wrote:
hello,
In OSPF, how can I filter the default route from being propagated out in the
same area? I want to deny the external default route in outbound routes so
other routers in the same area doesn't
you need address-family ipv4 mdt
and a separate vrf to carry the traffic
Josh Fleishman wrote:
I'm looking for a way to advertise vrf routes via MBGP. I would expect it
to look something like this:
router bgp AS#
address-family ipv4 vrf NAME multicast
or
address-family ipv4 multicast
And also keep in mind that WS-X6708-10GE is a true line-rate card...
Eric Gauthier wrote:
Mark,
I'm not sure if you have other 10g links, but keep in mind that Cisco has
(at least) two 10g optics - Xenpak and X2 - that are not intercompatible.
I believe that the 6704-10ge uses Xenpak and
I meant that you can not push 40G out of a 6704
even with a dfc attached to it.But you can do it with a 6708
with 1:1 subscription.
Gert Doering wrote:
Hi,
On Tue, Mar 31, 2009 at 08:54:47AM +0200, Gergely Antal wrote:
And also keep in mind that WS-X6708-10GE is a true line-rate card
Is there similar options also in the 10G market...
I have the same problem like Ray but on 10G
with cisco LR modules i have -16.5 RX receive power,and the telco says
that thay dont support ER or ZR.
Gert Doering wrote:
Hi,
On Fri, Mar 13, 2009 at 12:48:15PM -0300, Ray Burkholder wrote:
I
If i'm not mistaken you can only poll the active sup
,and if a switchover occures then you can poll the new active sup based
on the indexes by the entity-mib
Asad Ul-Islam wrote:
Dear friends
I am trying to poll for CPU usage of Standby SUP7203b in 6500 Chassis.
I have tried
If you use cacti then here is a good template for your problem
http://forums.cacti.net/about27623.html
Gergely Antal wrote:
If i'm not mistaken you can only poll the active sup
,and if a switchover occures then you can poll the new active sup based
on the indexes by the entity-mib
Asad Ul
is ip mtu 1500 set on the interfaces?
Antonio M. Soares wrote:
Hello group,
I have a 6500 running 122-18.SXF7 with lots of BGP peers and all of the BGP
sessions have negotiated a MSS of 536 bytes. Here's an
example:
++
6500sh ip bgp neighbors x.x.x.x
...
Hiall
I want to build a lab setup for education proposes and,
I have 2 7206 VXR's and each of them has a PA-POS-2OC3 card.
Is it somehow possible to cross-connect these cards or I need some active
equipment for this?
signature.asc
Description: OpenPGP digital signature
did you set qos to vlan based?
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/qos.html#wp1726124
Ian MacKinnon wrote:
Hi All,
I am having an issue with policers on a 6500 not actually doing any
policing. Running 12.2(33)SXH
I have config like
17 matches
Mail list logo