Hi Peter,
Do the overrun match with input drops on the interfaces input queue? Maybe
this traffic being punted to CPU?
I had this issue on a Cisco 7600 when using "mpls ldp explicit-null" and
many Gbps of traffic needed to be sent to CPU.
Hope this helps.
Cheers,
JF
Jean-François Dubé
Hi Rupesh,
I suggest you first make sure DHCP works properly for the affected CPE.
debug cable mac H.H.H
debug cable dhcp
These should allow you to see DHCP D.O.R.A. for a CPE with MAC H.H.H
The CMTS needs to use leasequery (RFC 4388) if you experienced an outage of
some sort to rebuild its
Hi Rob,
Did you mean to say you have IGMP static-groups on the 7600_3 to attract
multicast traffic toward your distribution switches?
If you meant 7600_1 then I'm not sure what your topology is but the
redundancy issue made me think of a similar issue I faced in the past.
Are you using any
Hi Jeff,
My understanding is that you are basically going to replace the default
gateway for in a couple of vlans. (Same IP but different MAC.)
Active HSRP router will issue gratuitous ARP (gARP) when it becomes Active
so there should be little disruption for the hosts inside the vlan trying
to
Hi Antonio,
I had a similar issue and decided to reload the linecard.
pse_pogo_driver[281]: %PLATFORM-CIH-5-ASIC_ERROR_SPECIAL_HANDLE : pse[1]: A
sbe error has occurred causing data corrected. 0x12470007
I don't like to see any messages regarding single bit error (SBE) and even
less when it's
We use IneoQuest gear to monitor multicast data after it leaves the source
and before it enters the destination.
The boxes give nice reports of both IP and MPEG, and are MDI compliant
(RFC4445)
Cheers,
JF
cisco-nsp cisco-nsp-boun...@puck.nether.net a écrit sur 2013-07-16
12:53:23 :
De : R S
.
(You need two 4-bytes labels for MPLS VPN so if you are using Ethernet your
IOS MTU should be 1508 at least)
Cheers,
JF
De :aar...@gvtc.com
A : Jean-Francois Dube jean-francois.d...@videotron.com,
Cc :cisco-nsp@puck.nether.net
Date : 2013-03-29 15:21
Objet : Re: [c-nsp
Hi Aaron,
It sounds like you may be having MTU issue.
At least that is my experience when you can ping and only browse some
websites.
Your CMTS is running IOS and your ASR9K is running IOS-XR.
In IOS-XR you need to account for the L2 header of 14 bytes so the
default MTU is 1514.
If you are
