Side A: 2621XM
Side B: 1721
-Original Message-
From: Murphy, Jay, DOH [mailto:jay.mur...@state.nm.us]
Sent: lundi 14 juin 2010 21:49
To: Rens; Aaron; Martin Moens
Cc: cisco-nsp@puck.nether.net
Subject: RE: [c-nsp] E1 packet loss
Same model routers on both ends?
~Jay Murphy
IP Network
To: Rens; cisco-nsp@puck.nether.net
Subject: RE: [c-nsp] E1 packet loss
Is your provider providing clock?
You are set for clock source internal, try setting it to line.
Note my recent experience of traditional TDM type circuits is that there is
nobody left at the providers with any clue about TDM
When I set to line and crc4 same problem
_
From: Aaron [mailto:dudep...@gmail.com]
Sent: vendredi 11 juin 2010 20:53
To: Martin Moens
Cc: Rens; cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] E1 packet loss
+1
clock line
crc4
On Fri, Jun 11, 2010 at 08:41, Martin Moens mo
-nsp-boun...@puck.nether.net] On Behalf Of Rens
Sent: Monday, June 14, 2010 3:27 AM
To: 'Aaron'; 'Martin Moens'
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] E1 packet loss
When I set to line and crc4 same problem
_
From: Aaron [mailto:dudep...@gmail.com]
Sent: vendredi 11 juin
Hi all,
I have 2 routers that are connected via a 3rd party E1 circuit.
When I ping between my routers I have packet loss.
I have done a BER test on the E1 circuit which comes out clean.
Already replaced both E1 cards and my cabling, but still having packet loss
(between 30 10% depending on
...@puck.nether.net [mailto:cisco-nsp-
boun...@puck.nether.net] On Behalf Of Rens
Sent: 11 June 2010 13:18
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] E1 packet loss
Hi all,
I have 2 routers that are connected via a 3rd party E1 circuit.
When I ping between my routers I have packet loss.
I have done
E1 errors are often caused by clocking issues - are you shure you should
provide clocking on the A-end?
Often clocking is provided by the network.
Tried to switch on crc4?
Martin
On Friday, 11 June, 2010 14:18 Rens wrote:
Hi all,
I have 2 routers that are connected via a 3rd party E1
+1
clock line
crc4
On Fri, Jun 11, 2010 at 08:41, Martin Moens mo...@carrier2carrier.comwrote:
E1 errors are often caused by clocking issues - are you shure you should
provide clocking on the A-end?
Often clocking is provided by the network.
Tried to switch on crc4?
Martin
On Friday, 11
