Hi there
have u managed to figure out what was causing that?
Did you see that your clns filter references
49.0001...0100.00
where as your R1 router's Sys ID is
49.0001...0001.00
Regards,
Dave
Ibrahim Abo Zaid wrote:
Hi All
I was testing ISIS Adj-filter option , R1,R2
Kruger
Sent: martes, 08 de septiembre de 2009 15:04
To: Ibrahim Abo Zaid
Cc: cisco_nsp
Subject: Re: [c-nsp] ISIS Adj-filter problem
Hi there
have u managed to figure out what was causing that?
Did you see that your clns filter references
49.0001...0100.00
where as your R1 router's Sys ID
Kruger
Sent: martes, 08 de septiembre de 2009 15:04
To: Ibrahim Abo Zaid
Cc: cisco_nsp
Subject: Re: [c-nsp] ISIS Adj-filter problem
Hi there
have u managed to figure out what was causing that?
Did you see that your clns filter references
49.0001...0100.00
where as your R1
Hi All
I was testing ISIS Adj-filter option , R1,R2 and R3 are connected over
ethernet switch (using dynamips) with the below configuration
the configuration works for adj point and both R2 and R3 have ADJ with R1
only , the problem is R2 is droping R1 and R3 LSPs and debug shows it is
dropped