Hi Steve
A few things to check:
1. You have vlan 200 created on the 3524 (the commands you have in the
diagram will be permitted without the actual vlan existing on the switch)
2. You may need to set the q-in-q outer tag on the 3524 with the
following commands on the Fa0/1 port:
2. You may need to set the q-in-q outer tag on the 3524 with the
following commands on the Fa0/1 port:
switchport mode dot1q-tunnel
switchport access vlan 200
I don't believe the old 3500XL series (including the 3524) support
QinQ. It may *work* :-)
Steinar Haug, Nethelp consulting,
encourage
further advice
Thanks
Steven
-Original Message-
From: Reuben Farrelly [mailto:reuben-cisco-...@reub.net]
Sent: 04 September 2012 12:31
To: Steve McCrory
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] ME3600X - Bridge Domain Routing with SVI
Hi Steve
A few things
