Quoting Masood Ahmad Shah [EMAIL PROTECTED]:
Well, interesting.. sometimes Cisco guys forget to import some cool
features; I don't know why but it has been seen on some occasion. Better you
down grade to the release which support baby giants
For those switches that support up to 1530
] On Behalf Of [EMAIL PROTECTED]
Sent: Thursday, January 03, 2008 9:19 AM
To: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] MTU Issue on QinQ Eth link with MPLS
Quoting Matt Carter [EMAIL PROTECTED]:
Catalyst 2950/2955 Series
http://www.cisco.com/en/US/products/hw/switches/ps700
Quoting Masood Ahmad Shah [EMAIL PROTECTED]:
Well, better you check current MTU settings using command
# sh interfaces | inc MTU
And cheers :)
Yes of course you need to adjust routers MTU as well; if you are running
with MPLS or gre
Thanks Masood.
I've run into a strange problem on the
Hi,
We have recently had a QinQ link provisioned, but have noticed mtu
issues when testing.
The link is terminated on 2950's(Trunk Ports) at each end, with the
2950's then connected(Also trunk ports) to 7204VXRs, and the various
vlans broken out into dot1q Ints.
Without MPLS(Including MPLS
immediately by replying
to the sender of this E-Mail or by telephone.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Wednesday, January 02, 2008 4:02 PM
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] MTU Issue on QinQ Eth link
We have recently had a QinQ link provisioned, but have noticed mtu
issues when testing.
The link is terminated on 2950's(Trunk Ports) at each end, with the
2950's then connected(Also trunk ports) to 7204VXRs, and the various
vlans broken out into dot1q Ints.
Without MPLS(Including MPLS
Quoting Matt Carter [EMAIL PROTECTED]:
Catalyst 2950/2955 Series
http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration
_example09186a008010edab.shtml#c5
You can classify the Catalyst 2950/2955 Series switches into two major
groups, where one supports baby giants (up
