...@puck.nether.net] On Behalf Of Aaron
Sent: Wednesday, September 11, 2013 10:14 PM
To: 'Joseph Mays'; cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] VLAN Trunking Question
Joseph, Like Gert said, I would try this on cata, b, and c...
Cata...
Sh spanning int f0/1
Sh spanning int f0/10
Catb...
Sh
Hi,
On Tue, Sep 10, 2013 at 05:25:49PM -0400, Joseph Mays wrote:
Catalyst A
interface FastEthernet0/1
description to gw1.armplc
duplex full
speed 100
switchport trunk encapsulation dot1q
switchport mode trunk
no cdp enable
interface FastEthernet0/10
description Hatteras 1 - HN408-U
-Original Message-
From: quinn snyder
Sent: Tuesday, September 10, 2013 6:13 PM
To: Joseph Mays
Subject: Re: [c-nsp] VLAN Trunking Question
do you have vl808 on all cats between your pair of c7200s?
q.
-= sent via iphone. please excuse spelling, grammar, and brevity =-
On Sep 10, 2013, at 14
Samsung Mobile
Original message
From: Joseph Mays m...@win.net
Date: 11/09/2013 17:50 (GMT+00:00)
To: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] VLAN Trunking Question
* Have you defined the vlans?
Yes, they are defined in both the vlan database and the config on all
to a trunk that is not
working even when it’s wide open.
From: Peter Persson
Sent: Tuesday, September 10, 2013 6:21 PM
To: Joseph Mays
Subject: Re: [c-nsp] VLAN Trunking Question
Hey,
This would be right.
But i got a few questions.
* Have you defined the vlans?
* Why have a dirty net and have
Joseph, Like Gert said, I would try this on cata, b, and c...
Cata...
Sh spanning int f0/1
Sh spanning int f0/10
Catb...
Sh spanning int f0/4
Sh spanning int f0/1
Cata...
Sh spanning int f0/17
Sh spanning int f0/1
See if vlan 808 is FWD on all those...
If so, I would then do this...
Cisco
In that instance we had to make the middle switch a vtp client. Odd but
true...
All are set to vtp transparent at the moment, but I can try setting the
middle to vtp client to see what happens.
No difference. I changed it back to them all being in transparent mode.
In that instance we had to make the middle switch a vtp client. Odd but
true...
All are set to vtp transparent at the moment, but I can try setting the middle
to vtp client to see what happens.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
Hi,
On Wed, Sep 11, 2013 at 12:50:20PM -0400, Joseph Mays wrote:
* Have you defined the vlans?
Yes, they are defined in both the vlan database and the config on all the
switches.
I'd check with show spanning-tree vlan 808. It usually is quite indicative
on what the switch thinks about
Okay, so I am trying to set up a single VLAN to go through a series of catalyst
switches. What I need, effectively, is one long ethernet connection between two
routers. I thought this should work but since it is not, clearly, I've
fundamentally misunderstood something.
Cisco 7206A(vlan 808
The most likely cause is that the VLAN isn't configured on the switches.
show vlan
show int trunk
On Tue, Sep 10, 2013 at 4:25 PM, Joseph Mays m...@win.net wrote:
Okay, so I am trying to set up a single VLAN to go through a series of
catalyst switches. What I need, effectively, is one long
11 matches
Mail list logo