Re: [c-nsp] Specification of RA that responds to RS (applied RA suppress I/F)

Hi, hsrp + ipv6 nd prefix default no-advertise + ipv6 nd ra suppress: = ra from each 'real' router - link local (2 default gateways) autoconfig / prefix announcment is OFF (Yay !) (A) ipv6 nd ra suppress command stops MULTICAST

Re: [c-nsp] smaller PI

Thats either a cruel joke or jeer Jan Gregor wrote: Hi guys, one of our customers requested PI adresses from RIPE (for whatever reason) and got back /26. Opinions? Best regards, Jan ___ cisco-nsp mailing list cisco-nsp@puck.nether.net

[c-nsp] Nexus 5000 Fabric Manager Server License

Is the Nexus 5000 Fabric Manager Server License required for FEX N2K support? Thanks ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/

[c-nsp] Cisco 6509 reboots on its own... again...

Hello, I have a c6509 with redundant SUP720-3BXL (s72033-advipservicesk9_wan-mz.122-33.SXH2a.bin) that's rebooted on its own this morning. FYI, the same router reboot 3 weeks ago unexpectedly ! Here is a trunkated output of the crashfile info : Jun 11 06:48:29.377: %PFREDUN-SP-6-ACTIVE: Standby

Re: [c-nsp] Cisco 6509 reboots on its own... again...

On 05/07/10 10:36, Youssef Bengelloun-Zahr wrote: I am running the IOS bug toolkit looking for a possible match with my case. Don't waste your time. Open a TAC case. ___ cisco-nsp mailing list cisco-nsp@puck.nether.net

Re: [c-nsp] Cisco 6509 reboots on its own... again...

Not possible, don't have one for this type of gear :-/ And yes, bug toolkit was a waste of time but had no other choice... Any other clues ? Y. Le 5 juil. 2010 à 12:29, Phil Mayers p.may...@imperial.ac.uk a écrit : On 05/07/10 10:36, Youssef Bengelloun-Zahr wrote: I am running the IOS

Re: [c-nsp] Cisco 6509 reboots on its own... again...

On 05/07/10 11:53, Youssef Bengelloun-Zahr wrote: Not possible, don't have one for this type of gear :-/ And yes, bug toolkit was a waste of time but had no other choice... Any other clues ? The crashinfo is not revealing, which is why I suggested a TAC case. Without support I can only

Re: [c-nsp] Cisco 6509 reboots on its own... again...

Hi, Not possible, don't have one for this type of gear :-/ oh. this list isnt a free TAC service though. alan ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at

Re: [c-nsp] Cisco 6509 reboots on its own... again...

Yes, crashfile isn't revealing... I have access though to the IOS software base and I already downloaded SXI3 and SXI4. I have been thinking about this for quite some time now, maybe it's time. Thanks. Y. 2010/7/5 Phil Mayers p.may...@imperial.ac.uk On 05/07/10 11:53, Youssef

Re: [c-nsp] Cisco 6509 reboots on its own... again...

I know that for a fact... Y. 2010/7/5 Alan Buxey a.l.m.bu...@lboro.ac.uk Hi, Not possible, don't have one for this type of gear :-/ oh. this list isnt a free TAC service though. alan -- Youssef BENGELLOUN-ZAHR …… Ingénieur Réseaux et Télécoms Technopole de l'Aube

Re: [c-nsp] Cisco 6509 reboots on its own... again...

Hi, On Mon, Jul 05, 2010 at 12:06:00PM +0100, Alan Buxey wrote: oh. this list isnt a free TAC service though. No, this list is usually much better :-) - especially the weird problems and crashes are quite likely to get a quick yes, I've seen this too, and we found the cause to be X here on

Re: [c-nsp] Cisco 6509 reboots on its own... again...

Hi, No, this list is usually much better :-) - especially the weird problems and crashes are quite likely to get a quick yes, I've seen this too, and we found the cause to be X here on the list... random 6500 crashes? reseat the blades. faulty backplane or faulty blade. upgrade IOS and see

Re: [c-nsp] Cisco 6509 reboots on its own... again...

Hi, 2010/7/5 Alan Buxey a.l.m.bu...@lboro.ac.uk Hi, No, this list is usually much better :-) - especially the weird problems and crashes are quite likely to get a quick yes, I've seen this too, and we found the cause to be X here on the list... random 6500 crashes? reseat the blades.

Re: [c-nsp] Cisco 6509 reboots on its own... again...

Hi, == Blades didn't move for months if not years for some ! Plus, diags passed fully without any kind of problem ! we had an issue earlier this year when the temperature of a data centre went up by 3 degrees and cooled repidly. yep. reseating the blade fixed it. hmmm. :-) alan

Re: [c-nsp] 6500/Sup720 losing startup-config

On Tue, 2010-06-29 at 17:53 +0200, Peter Rathlev wrote: I have an old (~7 years) Sup720 PFC3BXL that has been running fine for all it's life and is now to act as a secondary node in a new place. I've loaded it with the new config and new IOS and (soft) reloaded a couple of times; no problems

Re: [c-nsp] Cisco 6509 reboots on its own... again...

Hello Alan, 2010/7/5 Alan Buxey a.l.m.bu...@lboro.ac.uk Hi, == Blades didn't move for months if not years for some ! Plus, diags passed fully without any kind of problem ! we had an issue earlier this year when the temperature of a data centre went up by 3 degrees and cooled repidly.

Re: [c-nsp] 6500/Sup720 losing startup-config

Hello Peter, Could you share the address from where you got theese pls ? Could be useful someday, you never know ;-) Thanks. Y. 2010/7/5 Peter Rathlev pe...@rathlev.dk On Tue, 2010-06-29 at 17:53 +0200, Peter Rathlev wrote: I have an old (~7 years) Sup720 PFC3BXL that has been running

Re: [c-nsp] Cisco 6509 reboots on its own... again...

Hi, == Are you implying that a slight temperature raise of 3 degrees was enough to provoque the dilation of the line cards inside the chassis ?!? Hmm Curious, I noticed a slight increase of our DC's temp between last saturday night and sunday morning for a few hours (approx 10h) :

[c-nsp] show parser dump all deprecated? alternatives?

As far as I can read at Cisco.com: - In the following example, the show parser dump command is not available in Cisco IOS software because this command was removed in Cisco IOS 15.0(1)M: Router# show parser dump all Command accepted, but obsolete, parser dumper has been

Re: [c-nsp] Cisco 6509 reboots on its own... again...

Hi, Still, if talking strictly about physics here, have you ever heard of metal dilating at 26°C ? ..and we havent even broughy zinc-whiskers into the conversation yet! ;-) alan ___ cisco-nsp mailing list cisco-nsp@puck.nether.net

Re: [c-nsp] 6500/Sup720 losing startup-config

On 7/5/10 5:29 AM, Youssef Bengelloun-Zahr wrote: Hello Peter, Could you share the address from where you got theese pls ? Could be useful someday, you never know ;-) A CR1225 lithium cell? Most drugstores, Radio Shack, camera shop, etc. Follow-up: We changed the lithium cell (CR1225)

Re: [c-nsp] 6500/Sup720 losing startup-config

On Mon, 2010-07-05 at 14:29 +0200, Youssef Bengelloun-Zahr wrote: Could you share the address from where you got theese pls ? Could be useful someday, you never know ;-) I bought them at a local electronics retail store (Radiolageret) in Denmark, but that's probably not very useful

[c-nsp] Cisco L2tp class with password and rancid

Hi lists, I have an issue when I configure a l2tp-class with a password in it, every time I do a sho run the level 7 encrypted password is shown differently. When using Rancid for config backups, every time Rancid runs I receive a complaint my config has changed. According to Cisco's TAC this is

Re: [c-nsp] show parser dump all deprecated? alternatives?

I honestly think they removed 'show parser dump all' because we kept reporting bugs in it. - Jared On Jul 5, 2010, at 8:28 AM, LM wrote: As far as I can read at Cisco.com: - In the following example, the show parser dump command is not available in Cisco IOS software

Re: [c-nsp] [rancid] Cisco L2tp class with password and rancid

Martin Moens wrote: Hi lists, I have an issue when I configure a l2tp-class with a password in it, every time I do a sho run the level 7 encrypted password is shown differently. When using Rancid for config backups, every time Rancid runs I receive a complaint my config has changed.

Re: [c-nsp] [rancid] Cisco L2tp class with password and rancid

Hi, I have an issue when I configure a l2tp-class with a password in it, every time I do a sho run the level 7 encrypted password is shown differently. When using Rancid for config backups, every time Rancid runs I receive a complaint my config has changed. I've had this issue with

Re: [c-nsp] MST Reserved VLANs on Nexus 5010

Just a quick update for everyone. It appears the fix is two releases away. The first (Deewhy Plus) is going to be based on 4.2 and should be out in Q3 2010. It will not contain the fix. The second (Eaglehawk) will be based on NX-OS 5.0 regardless. It will supposedly contain the fix. And the time

[c-nsp] 3745 router NM slots

Hello list, I have several 3745 routers. I have the NM slot 2 (bottom left) populated in a few of them. It seems that this particular slot is very touchy when it comes to making a good connection between the NM and the backplane connector. Unless they're seated just right, I see everything from a

[c-nsp] Bandwidth usage per Queue (7600)

Hi list I'm wondering if it's possible somehow to plot the amount of traffic or pps going through each queue on a 67xx linecard in a 7600/6500 chassis, .e.g 6724 1p3q8t. Is there a way to accomplish that? Regards MKS ___ cisco-nsp mailing list

[c-nsp] how to remove a set ip route cmd

I want to remove, set ip route 0.0.0.0/0.0.0.0 10.1.1.1. From my old cat 6509. I have looked for the no command but not able to find it. I thought clear ip route would fix it but it does not set ip route 0.0.0.0/0.0.0.0 10.1.1.1 ! #dns set ip dns server 10.1.6.10 primary set ip

Re: [c-nsp] Cisco 6509 reboots on its own... again...

On Jul 5, 2010, at 4:50 AM, Alan Buxey wrote: == Blades didn't move for months if not years for some ! Plus, diags passed fully without any kind of problem ! we had an issue earlier this year when the temperature of a data centre went up by 3 degrees and cooled repidly. yep. reseating the

Re: [c-nsp] how to remove a set ip route cmd

try clear ip route 0.0.0.0 10.1.1.1 For some reason, it doesn't want the netmask. Rgrds, Alan On Mon, Jul 5, 2010 at 3:29 PM, Leslie Meade lme...@signal.ca wrote: I want to remove, set ip route 0.0.0.0/0.0.0.0 10.1.1.1. From my old cat 6509. I have looked for the no command but not able to

Re: [c-nsp] Cisco 6509 reboots on its own... again...

I remember 'chip creep' being a question on my Novell service and support exam way back when. I laughed, but a few years later, had a video card that was acting erratic with an odd pattern. Thought it was a long shot, but all the video RAM chips had crept out halfway. Pushed them back in,