Hi All!!!
Can anybody explain upgrade procedure for CiscoWorks LMS. I have CiscoWorks
LMS 3.2 and I want to upgrade software up to 4.2 So what do I need for it?
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
Hello Oliver.
Yes it's possible.
Do you need example config?
-Original Message-
From: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Olivier CALVANO
Sent: Monday, October 15, 2012 1:51 PM
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] NAt on
17.11.2012 11:59, Deny IP Any Any пишет:
Does anybody have operational experience with the 8.3 or 8.4 code base on
an ASA5585X, or any other SMP-enabled ASA? I've stuck with 8.2 so far and
been very happy; I'm aware of the NAT changes post-8.2. This setup would be
for a large e-commerce
172.24.203.22 53 0x8002 0x00495A 0
172.24.17.128 172.24.203.22 53 0x8002 0x00C7DB 0
172.24.17.160 172.24.203.22 53 0x8002 0x0086FC 0
172.24.17.192 172.24.203.22 53 0x8002 0x00A5AD 0
Have any ideas?
B.R.
Murat Kaipov
Hello Andriy,
Thank you for good suggestion.
From: Andriy Bilous [mailto:andriy.bil...@gmail.com]
Sent: Monday, December 10, 2012 7:13 PM
To: Murat Kaipov
Cc: Cisco-NSP Mailing List
Subject: Re: [c-nsp] Redistributing OSPF into another OSPF process
Redistribution of networks local
[mailto:adam.vitkov...@swan.sk]
Sent: Monday, December 10, 2012 6:18 PM
To: 'Murat Kaipov'; cisco-nsp@puck.nether.net
Subject: RE: [c-nsp] Redistributing OSPF into another OSPF process
I'm not sure what you'd like to accomplish with the below ospf config but it
seems all wrong I don't see the point
Do you have 3750 or ME3750?
Are you going to use 3750 like CE or PE?
__
С Уважением
Мурат Каипов
тел: +7(940)9910142
e-mail: mkkai...@gmail.com
Человек, который придумает, как бить людей в лицо через интернет, заработает
Hello Garry.
You can use static route or you can use route map.
Отправлено с iPad
15 дек. 2013 г., в 2:36, Garry g...@gmx.de написал(а):
Hi,
I have a remote site connected via two links at separate places in our
network. One link (stm1) is the primary route, the second (50M) is
mostly
Authorization Profile is DenyAccess
12706 LEAP authentication failed; Finishing protocol.
11504 Prepared EAP-Failure
11003 Returned RADIUS Access-Reject
__
B.R. Murat Kaipov
e-mail: mailto:mkkai...@gmail.com mkkai
. Murat Kaipov
e-mail: mailto:mkkai...@gmail.com mkkai...@gmail.com
-Original Message-
From: Ulrik Ivers [mailto:ulrik.iv...@excanto.se]
Sent: Monday, June 23, 2014 4:05 PM
To: Murat Kaipov
Cc: cisco-nsp@puck.nether.net
Subject: RE: [c-nsp] ACS 5.2 authorization issue
Hi,
1. Check
Hello Guys.
I need connect two PoP's with 10G links. Distance between PoP's nearly
120km. We have fiber optic between PoP's with two regeneration points
located nearly in 40 km between each other. We have not DWDM. Can you advise
some equipment (May be like EDFA) for fiber optic regeneration
Hello Jared.
Cisco say's that ZR SFP's just for 80 km, but Media Converters you advised
looks nice.
Thank you.
-Original Message-
From: Jared Mauch [mailto:ja...@puck.nether.net]
Sent: Thursday, September 04, 2014 5:32 PM
To: Murat Kaipov
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp
Hello Guys.
Did you have any experience with Cisco Small Business SF300 switches? We
purchased few of them and now I have little trouble. I can't add this
switches to snmp monitoring. For monitoring purposes I use PRTG v13, I try
add snmp mib's published by Cisco on official web site, but they
://supportforums.cisco.com/community/5976/small-business-switches
--
Clinton Work
Airdrie, AB
On Thu, Sep 11, 2014, at 11:36 AM, Murat Kaipov wrote:
Hello Guys.
Did you have any experience with Cisco Small Business SF300 switches?
We purchased few of them and now I have little trouble. I can't add
Hello James.
Functionally BDI and SVI the same. BDI used with EVC. So on ASR routers you
use BDI on switches you use SVI's.
Have a good day.
-Original Message-
From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of
James Bensley
Sent: Tuesday, September 16, 2014 1:09 PM
Hello Victor.
Very interesting issue. Can you provide show ip ospf 12 database issue like
this can occur when you have 10.65.127.246 address on other device.
Отправлено с iPad
26 нояб. 2014 г., в 9:42, Victor Sudakov v...@mpeks.tomsk.su написал(а):
Colleagues,
We have found a very
Hello dear.
What you mean under E1 interface? You can configure E1 port as Serial interface
which supports mpls. I try it on real ASR901, MWR2941 and 7206vxr.
Отправлено с iPad
8 дек. 2014 г., в 18:34, M K gunner_...@live.com написал(а):
Does the E1 interface support MPLS ?Anyone tried E1
Hello Marco.
Keep in mind that ME3600/ME3800 platforms doesn't support BFD offload, and
all BFD packets processed by CPU.
http://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/r
elease/15-4_1_S/chassis/configuration/guide/3600x_24cxscg/swbfd.pdf
Show configuration on both
Hello Marco.
Now I don't have any idea. But in my opinion there is issue on me3600. I
haven't any proof, but it is just my experience with ME series switches. If you
can, check this theory. Connect gi2/7 on cat6500 to another box and try setup
ospf with bfd in some another ospf process. You can
Hello folks!
I have little question about DNS servers that you use in your environment?
We use bind on freebsd servers now. I did some benchmarks and found that
google public DNS is 8 - 10 time faster than my own. So I decide change BIND
for something more faster. I'm in MNO market. Any
Thank you guys!
I have little testing environment with 500 users and I'm going testing this
DNS servers there.
Cheers.
-Original Message-
From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of
Tarko Tikan
Sent: Tuesday, December 01, 2015 9:15 PM
To:
Hello Folks!
I need IOS-XE suggestion for PPPoE termination on Cisco ASR1004. I have
nearly 5k sessions. Now we use Cisco IOS XE Software, Version 03.11.04.S.
On this ASR1000 the following services are configured:
PPPoE termination
IPoE termination
ISG
Thanks in advance.
Murat Kaipov
Hello, it looks like NAT rules issue.
> 6 сент. 2016 г., в 1:55, Pavel Dimow написал(а):
>
> Hi guys,
>
> I have a big problem in my setup and I don't know how to solve it plus it's
> urgent :(
>
> I have ASA1 and ASA2 and L2L IPSec tunnel. Everything working fine.
23 matches
Mail list logo