Marco,
Are you using NSF/SSO on the C6500 devices? If yes, please check the
restrictions regarding the use of BFD and NSF.
Regards,
Alessandro
On Dec 9, 2014 5:49 PM, Murat Kaipov mkkai...@gmail.com wrote:
Hello Marco.
Keep in mind that ME3600/ME3800 platforms doesn't support BFD offload,
,
Alessandro Braga
On Nov 28, 2014 12:23 PM, Alejandro Aristizabal
aaristiza...@mediacommerce.net.co wrote:
Good day,
Im trying to implement L3 VPN on IOS XR but interfaces BVI doesnt route
inside de MPLS core, when I change the vrf interface from BVI to
gi0/0/0/0.3963 it worksany one knows
John,
please check the impact of applying that command on global configuration mode.
I would like to apply that on interface mode.
BR,
Alessandro Braga
CCIE #30939
On Dec 8, 2013, at 2:21 AM, Sarala Akella (sakella) sake...@cisco.com wrote:
Hello John,
Router using ip tcp adjust
traffic-eng load-share
I didn't found at the doc-cd.
P.S: at this time I have not a terminal access.
BR,
--
Alessandro Braga
CCIE #30939
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive
On Nexus devices, Ensure that you are configuring the ports correctly for the
type of device to which the interface is connected.
Att,
Alessandro Braga
CCIE #30393
On Mar 13, 2012, at 8:56, jack daniels jckdaniel...@gmail.com wrote:
Hi Guys,
I have a scenario for which I'm scratching my
?
for example, which model STP to use? We are using the Rapid-PVST Nexus, but we
do not know the model used in juniper ..
Thanks in advance.
--
Att,
Alessandro Braga
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo
Dear,
I am experiencing a problem on a 34MB SDH circuit between a Cisco 7206 and a
2851 router, the PortAdapter on 2851 is 'NM-1T3/E3 One port T3/E3 network
module'.
I have 100% sucessful end-to-end connectivity, tested through the ping
command, but whenever I transmit some traffic (10Mb about)
Dear,
which the command can I use in IOS-XR (CRS-1) to obtain MSC details; eg
Performance (20G,40G, 140G).
The commands bellow don't show it:
show inventory
show version
I think that 'show diag ?' will show, I'm correct?
Brgs,
Alessandro Braga
,
Rano
--- On Fri, 11/2/11, Alessandro Braga sandro.u...@gmail.com wrote:
From: Alessandro Braga sandro.u...@gmail.com
Subject: [c-nsp] MSC Cisco CRS-1
To: cisco-nsp cisco-nsp@puck.nether.net
Date: Friday, 11 February, 2011, 10:28 PM
Dear,
which the command can I use in IOS-XR (CRS-1
2011-02-11
--
even.lee
--
*发件人:* Alessandro Braga
*发送时间:* 2011-02-11 23:36:14
*收件人:* cisco-nsp
*抄送:*
*主题:* [c-nsp] MSC Cisco CRS-1
Dear,
which the command can I use in IOS-XR (CRS-1) to obtain MSC details; eg
Performance (20G
Folks,
Thanks a lot! Good stuffs!!
Rgs,
AB
2010/10/13 quinn snyder snyd...@gmail.com:
having used this book -- its of some value. its a great tool for
configuration of the device -- quite lacking on architecture and the little
one offs of the device. if you need to get the device
Hi guys,
I'm learning about Nexus arch because I'll work with this in the future.
Could you give me some good books to start this arch?
Best Regards,
AB
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
Hi,
you should use dynamips + dynagem for get better performance.
Att,
AB
2010/9/3 Mohammad Khalil eng_m...@hotmail.com:
www.gns3.net
Date: Fri, 3 Sep 2010 15:47:38 -0700
From: snort...@yahoo.com.au
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] cisco simulators
Hi, all:
What is
I am responsible to implement a DRAC Network. But I am in doubt of
what would be the best way to implement this network, I dont have any
experience at all with this type of implementation.
I have considered Cisco with Private-VLAN, but my manager doesnt have
budget for a network full of Cisco
Verify duplex and speed configurations on interface, the rule is:
autoXauto, forcedXforced. If problem not solve, disable cdp.
Att,
AB
2010/8/17 Jeferson Guardia jefers...@gmail.com:
Guys,
Anyone knows how to solve this on dynamips? (router with lan switch
connection) - I thought that
Jeff,
use the 'show interface FastEthernet0/0' command on this router (R3)
and see a problem:
'duplex mismatch discovered on FastEthernet0/0 ''(not full duplex)''
- this interface not operate in fullduplex mode.'
Att,
AB
2010/8/17 Alessandro Braga sandro.u...@gmail.com:
Verify duplex
, if anyone knows another way out, please
let me know.
rgs,
2010/8/17 Alessandro Braga sandro.u...@gmail.com
Jeff,
use the 'show interface FastEthernet0/0' command on this router (R3)
and see a problem:
'duplex mismatch discovered on FastEthernet0/0 ''(not full duplex
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
18 matches
Mail list logo