[c-nsp] IOS to XR IOS Conversion

Dear All, Is there is any tool can be used to convert from Cisco IOS to XR IOS , in order to save some time during the migration from Cisco IOS to XR IOS ? I think if there is any tool like this , it will be very usefull to me Appreciate your help. Thanks alot Regards Jason

[c-nsp] PE Monitoring Tools

Dear All, Kindly i am working in a Service Provider environment We have daily upgrade in the network and moving customer from one PE to another PE Is there is any Management tool can check the status of the Customer (VRF) before and after the migration of the customer to another PE ?

Re: [c-nsp] 7600/RSP720 + SIP-400

HYG RMS-7606-LB#sh platform hardware capacity system System Resources PFC operating mode: PFC3C Supervisor redundancy mode: administratively sso, operationally sso Switching resources: Module Part number Series CEF mode 17600-SIP-400

[c-nsp] Upgrade to XR-IOS 3.8.1

Dear All, Kindly i want to upgrade one of my routers to Cisco IOS XR 3.8.1 (Cisco 12410) my current IOS is 3.6.1 any advice how can i make this upgrade gracefully without any downtime ? and what are the steps to migrate to version 3.8.1 Thanks Regards Jason

[c-nsp] Stop SYN Attack

Dear All, I have a TCP SYN attack on one of my routers (Cisco 7206), which causes the traffic to increase 100 Mbps on the Uplink interface This router is a PE router in a MPLS environment when i configured access-list to block the attack source , this causes the CPU utilization of the

[c-nsp] Cisco IOS to IOS XR Conversion

Dear All, Is there is any tool to convert Cisco IOS to Cisco XR IOS ? if there is one , i think it could benefit me alot ? Thanks Regards Jason ___ cisco-nsp mailing list cisco-nsp@puck.nether.net

[c-nsp] Hidiing a traceroute

Dear All, I want to hide a traceroute hops inside my network i know you can hide the traceroute inside an MPLS network can we hide also the traceroute inside an IP network Thanks In advance Regards Jason CCIE#24775 ___ cisco-nsp mailing

[c-nsp] Cisco SCE simultaneous users

Dear All, can anyone advice, does the SCE QM (Quota Manager) supports that a Username is running on Multiple SCE at the same time ? we have users in our network that can access the Network from two different places using the same username So what we got is that we have this