Hi
all the protocol mentioned are stable, we've less than 10 vlans on the gear.
Here the output taken 3 times after 30 secs.
thanks
xxx#sh mls statistics
Statistics for Earl in Module 1
L2 Forwarding Engine
Total packets Switched: 1126244033503
L3 Forwarding Engine
Total pa
On 1 March 2018 at 09:53, james list wrote:
> xxx#show ibc
> Interface information:
> 5 minute rx rate 944000 bits/sec, 793 packets/sec
> 5 minute tx rate 25000 bits/sec, 37 packets/sec
...
> 2467023087 Packets out of 554699386 CEF Switched, 0 Packets out of 0
> Tag CEF Swi
It is expected to have something like 30% SP CPU due to the diagnostics tests
that run on the LCs.
Excessive SP CPU usage is typically related to Layer 2 operations like STP,
IGMP and LACP.
But another root cause of SP CPU running wild can be HSRP on multiple SVIs. If
this applies - have You
You need service internal.
On 1 March 2018 at 11:50, james list wrote:
> Hi
> the mentioned command are not present:
>
>
> xxx#show platform ?
> aclDisplay CWAN ACL commands
> bridge Distributed/Hardware-based bridging information
> buffersShow buffer allocation
Here the output, I can share netcapture privately if you agree.
Thanks
xxx#show platform netint
Network IO Interrupt Throttling:
throttle count=122323 (0 in multicast fs), timer count=122323
active=0, configured=1
netint usec=4000, netint mask usec=800
resource netint mask usec=400
inband_th
Hi
the mentioned command are not present:
xxx#show platform ?
aclDisplay CWAN ACL commands
bridge Distributed/Hardware-based bridging information
buffersShow buffer allocation
cfmShow CFM Commands
eeprom Show CPU eeprom
etherchannel Pl
On 1 March 2018 at 08:29, james list wrote:
> Dear experts,
> has anybody experienced a 100% SP CPU usage on C6500-Sup720 (12.2(33)SXI5)
> with a lot of interrupts ?
> The main process is Heartbeat.
>
> Cisco TAC is struggling in having an idea to sorting out the issue, they
> are working since 3
Hey,
Anything in punts?
show plat cap buffer asic pinnacle slot 5 port 4 direction out priority lo
show plat cap buffer collect for 5
show plat cap buffer data filt
show plat cap buffer data sample
Replace 'slot 5' with your port SUP port number.
On 1 March 2018 at 10:29, james list wrote:
Dear experts,
has anybody experienced a 100% SP CPU usage on C6500-Sup720 (12.2(33)SXI5)
with a lot of interrupts ?
The main process is Heartbeat.
Cisco TAC is struggling in having an idea to sorting out the issue, they
are working since 3 days on it..
STP is stable, no mac moving, no real issue