Question with adj-rib-out and policy engines. I've look at bassam halabi's
explanation in inet routing archs, googles, etc, etc.
Is "show ip bpg neighbor 1.2.3.2 advertised-routes" PRE-outbound-policy or
POST-outbound-policy?
someone please explain why I see r1 "show ip bpg neighbor 1.2.3.2
advertised-routes" showing metric 2, but I see on r2 that it rcv's it change
as planned to metric 17.
My question is really just about why I see metric 2 on advertise-route route
of r1, when I know it's getting set to metric 17. Why don't I see what the
policy is changing it to on the sending router, r1 ?
I tried to only include pertinent info to keep this short and to the point.
*** R1. Sending an advertisement..
r1#sh ip bgp neighbors 1.2.3.2 advertised-routes | be Network
Network Next HopMetric LocPrf Weight Path
*> 10.0.2.1/32 10.0.1.1 2 32768 ?
r1#sh run | sec router bgp
router bgp 123
...
neighbor 1.2.3.2 route-map my-routemap-xmit out
route-map my-routemap-xmit, permit, sequence 10
ip address prefix-lists: my-prefixlist-out
Set clauses:
metric 17
r1#sh ip prefix-list
seq 1 permit 10.0.2.1/32
*** R2... Receiving that advertisement correctly as altered Metric 17
r2#sh ip bgp neighbors 1.2.3.1 routes | be Network
Network Next HopMetric LocPrf Weight Path
*> 10.0.2.1/32 1.2.3.1 17 0 123 ?
Total number of prefixes 1
r2#
r2#sh ip ro bgp
10.0.0.0/32 is subnetted, 1 subnets
B 10.0.2.1 [20/17] via 1.2.3.1, 09:40:38
-Aaron
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
