Hi,
Putting internet in a vrf is not that bad. I agree with some people say that
separate the global routing table with vrf is easier, especially for networks
that are deploying MPLS routers from scratch. I don't see any advantages from
putting internet Prefixes in the global routing table.
Hi,
In 7600 with 67xx Cards you can make in interface Vlan EoMPLS. I have implement
this with SRD and SRE IOS Take care that both end of the xconnect has the same
MTU!! If you put the following command it should inform you for any problems!
sh mpls l2transport vc 701 detail
Local interface:
Yes this might be true, for the CORE-facing side, in our implementation we have
these cards facing the CORE.
-Original Message-
From: Gert Doering [mailto:g...@greenie.muc.de]
Sent: Friday, April 06, 2012 10:55 AM
To: Μπερσίμης Μιχάλης (900356)
Cc: cisco-nsp@puck.nether.net
Subject: Re:
We have also the IOS XR 4.3 version which is stable so far.
Michalis Bersimis
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
On Fri, Jul 10, 2015 at 1:08 PM, James Bensley jwbens...@gmail.com wrote:
Hi All,
What are you running on your 7600's that are performing typical PE
services such as MPLS L2 L3 VPNs, transit, peering. I have a couple
with RSP720-3CXL-10GEs I want to move up to 15.3(3)S5 (don't ask where
Hello,
Irrelevant of BVI feature, one another limitation also is the lack of support
of mVPN (Draft-rosen model) and only mldp feature is supported at least prior
to the IOS 3.17. Although, 3.17 CCO says that it supports the feature, during
testing, there as some issues, such as no pim
I am testing draft rosen model, as stated here for IOS XE 3.17
(http://www.cisco.com/c/en/us/td/docs/routers/asr920/release/notes/ASR920_rel_notes/new_features.html#pgfId-1085169
)
Michalis
-Original Message-
From: Mark Tinka [mailto:mark.ti...@seacom.mu]
Sent: Tuesday, January 19,
Ι Can confirm, during our upgrade to 3.18S on the ASR-920-12CZ-A/D we didn't
face any 10G change to the admin down state. The only thing that we faced is
that the router didn't respond to any packet forward towards/from the box and
we had to do a reload.
Michalis
Hello Peter,
We use the asr920 with the draft rosen implementation with success with 3.18S
IOS Release. Please be aware that you need to change the SDM profile to video
for this to work, but it changes the TCAM resources in favor of video, which
reduces the IPv4 size in half
Please check this
I don't have a ME3600 that in ME3800 I have used the following configuration ,
which applies only xconnect to the whole interface, and can pass all frames
inside the EoMPLS tunnel
Me 3600 PE1:
interface GigabitEthernet0/xx
no switchport
mtu 9216
no ip address
service-policy input
Hello,
We experience the same problem with our Nexus 9k switches that we have. The
OID returns some kilobits of traffic which in reality is much more. The version
of NX-OS is 7.0(3)I2(2d)
I don't have any news regarding this fix which is very annoying and I don't
believe its HW limitation
We use them as an access/aggregation "small" router installed either inside
outdoor cabinets for broadband and ME services or at small PoPs for aggregation
MSANs. Some of the features are, MPLS, BGP (with RFC3107), LDP, RSVP, BFD. The
backhauling is 2x10G in a ring topology with other ASR920.
12 matches
Mail list logo