Hi All,
Hope one of you will be able to help or point me in the right direction.
CUCM and CUC are both 9.1.1,
CUCM to CUC is SCCP
CUCM to IPC Unigy is SIP
Dial plan on CUCM is E164
Dial Plan on Unigy is 4 digits
CUC account has the Unigy 4 digit extension set as a alternate MWI
I have
You may need qsig tunneling over the sip trunk to get MWI working with the sccp
unity integration. I bet you will have better luck doing sip to unity so UCM
can direct the unsolicited notify out to unigy directly.
Sent from my iPhone
On Jul 17, 2014, at 6:00 AM, Matthew Collins
Thanks and good points made. I think it's the most logical explanation - ptime
representing max supported payload per packet in msecs. I previously didn't
correlate this to the ptime media attribute in SDP so that's a good point as
well. Looking at maximum packetization periods for an IOS
So it's been a while since I've had to test equipment. I fired up a CUCM 9.1.2
system, attached a few 7942's in SIP mode, a few third party devices. Set
regions, location bandwidth, partition, CSS etc.
I cannot however seem to transfer a call. I hit transfer on a 7942, dial a
number, hang
So the Refer is coming in for transferring to extension 1001. Is that
extension in the None partition? There's no partitions listed in the
partition list so that extension needs to either be in the None partition
or you need to set the Re-Routing CSS on the phone since that's what's used
in a
The intercom function would work in that manner, one-way but I don't know if
you can speed dial it. There could be a panic speed dial that dials to an
auto-answer destination with the receiver muted/disconnected, but neither of
these options would be great for simultaneous calls. I don't
7705.006 |10:00:33.619 |AppInfo |Digit analysis: match(pi=1,fqcn=1004,
cn=1004, plv=5, pss=, TodFilteredPss=, dd=1001,dac=0)
7705.007 |10:00:33.619 |AppInfo |Digit analysis:
potentialMatches=NoPotentialMatchesExist
Is x1001 assigned to a partition?
PSS= is your partition search
Yea, you can't hang up the call on a refer transfer until CUCM sends the
Notify with the 200OK right after the Refer is accepted at least on a SIP
Trunk Refer. I would imagine it would work fairly similar on the 79XX
running SIP. Might be worth just waiting like 10 seconds before hanging up
and
There's a service parameter that also controls this behavior that may be of
use.
On Thu, Jul 17, 2014 at 2:25 PM, Countryman, Edward
edward.country...@presencehealth.org wrote:
We’ve just installed a call recording application for use with CUCM
phones.
On the wired 79xx phones there is
We've just installed a call recording application for use with CUCM phones.
On the wired 79xx phones there is an option to play a beep tone to callers, but
there is no such parameter on the 7925's.
Does anyone know if there is another way to play a periodic beep tone to
callers from a 7925
Hi,
Is it possible to report on HTTP Trigger applications? The inbuilt call
custom variable report in CUIC does not not show all applications
configured in UCCX.
I'm using the example webcallback scripts and setting enterprise data in
the http trigger application which I'd like to report on.
I
11 matches
Mail list logo