Kent,
You were probably just missing the profile required. See here:
https://community.cisco.com/t5/telepresence-and-video/sip-options-ping-and-session-server-group-on-dial-peer/td-p/2994584
On Mon, Nov 18, 2019 at 11:00 PM Kent Roberts wrote:
> Oh I know what your trying to do, and I have
Here is the config I used long time ago for CVP, and really the same for CUCM.
Still prefer the dial-peer sip options for timeout
ip host _sip._tcp.cvp.ucce.local srv 1 50 5060 nedcvpb.ucce.local
ip host _sip._tcp.cvp.ucce.local srv 2 50 5060 acccvpa.ucce.local
ip host
Oh I know what your trying to do, and I have had issues with it as well.
I have had better luck with with just using several dial-peers, and preference
them, and use the voice-class sip options keepalive
Then when you look at the dial-peer status you can see them out of service, and
if you
I pasted the wrong part of the script (to manually change it)...
Here is the actual config:
voice class server-group 1
ipv4 172.31.120.43
ipv4 172.31.125.43 preference 2
description Verizon SIP
!
Jonathan
On Mon, Nov 18, 2019 at 10:22 PM Anthony Holloway <
avholloway+cisco-v...@gmail.com>
Try on the dial-peer itself:
voice-class sip options-keepalive up-interval 180 down-interval 60 retry 2
On loss of response, it will take the dial-peer out of service.
> On Nov 18, 2019, at 9:22 PM, Anthony Holloway
> wrote:
>
> First off, I'm wondering why it says "no ipv4" in front of
First off, I'm wondering why it says "no ipv4" in front of your two
addresses. That might be your problem right there.
Secondly, I'd recommend putting an explicit preference on your entries,
it's just better for everyone, and you don't get a credit back from Cisco
for saving on a few ascii
Yes, that's a default, but it only works in some apps, like IE and not in
others like Chrome.
[image: image.png]
On Mon, Nov 18, 2019 at 4:18 PM Lelio Fulgenzi wrote:
>
> I'm a bit confused by the click to call features with Jabber and the
> parameter click2x.
>
> I'm pretty sure there was
Using session server groups on outbound dial-peers and it does not appear
to be failing over:
voice class server-group 1
no ipv4 172.31.125.43 preference 2
no ipv4 172.31.120.43
description Verizon SIP
!
We had the 172.31.20.43 go down (no response to invites) and we did NOT
failover to the
I'm a bit confused by the click to call features with Jabber and the parameter
click2x.
I'm pretty sure there was once a time where installing Jabber would allow you
to highlight a telephone number or a number was highlighted automatically and
you could click and call it with jabber.
Not
