I had this very issue about 6 or 7 years ago, and had to upgrade firmware.
The bug was triggered by having G722 disabled on the phone, but having the
phone's built-in-bridge enabled for recording.
On Thu, May 4, 2017 at 9:19 AM, naresh rathore wrote:
> it started working
it started working for one spoke site but other spoke sites are still not
working.
will check tomorrow.
From: cisco-voip on behalf of naresh
rathore
Sent: Thursday, May 4, 2017 6:10 AM
To: Ryan Huff
Upgraded the phone firmware and it started working
From: cisco-voip on behalf of naresh
rathore
Sent: Thursday, May 4, 2017 5:51 AM
To: Ryan Huff
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip]
both IP communicator and 7942 access MRGL via same device pool. Also, it remote
site and using the CUBE at HQ site. both IP Communicator and 7942 phone use
G729 to make external calls and use CUBE MRGL having hardware Conference as
first preference and Hardware Transcoding as second
Couple of questions ...
Do both devices have access to the same MRGL/MRG in CUCM?
Does the 7942's audio codec region match the region of where the disconnected
party comes from (ex. PSTN gateway) or does it need transcoded?
-Ryan
On May 3, 2017, at 8:04 PM, naresh rathore