Re: [cisco-voip] Upgrade from 8.0(x) to 9.X

2014-04-01 Thread Andrew Grech
You need TAC support, due to bugs. On Fri, Mar 28, 2014 at 10:19 PM, 0703Manjunath winmanjun...@gmail.comwrote: how do i need to plan for upgrade ?? Started looking into srnd for upgrade . Should i start with agent-PG first ?? after i have backup's of registry databases. Are there any

Re: [cisco-voip] Incoming CLI Unknown but shows up at bottom of display

2014-04-01 Thread Ryan Huff
So by CNAM dips, what I mean is that in telephony, it is generally the responsibility of the terminating carrier (the carrier terminating the inbound call to your peer) to provide the lookup CLID and pass that on to your peer (http://www.voip-info.org/wiki/view/CNAM). If they don't do the lookup,

[cisco-voip] HC and 7945 with 9-3-1SR1-1

2014-04-01 Thread Pawlowski, Adam
Good afternoon, I have a 7945 I've recovered back from a repair vendor that came to be pre-bricked (I guess they wanted to erase the firmware they used or something). I was not able to get it to join my cluster, running 9-3-1SR1-1 . It meets the minimum requirement, but it basically just

Re: [cisco-voip] SIP call issue, call get connected after 10 sec.

2014-04-01 Thread Amit Kumar
Hello Raj, What dtmf preference is set on sip trunk, as oob rfc 2833 method needs most mtp. On 01-Apr-2014 11:43 am, Rajkumar Yadav rajkumarya...@y7mail.com wrote: Hi Brian, I got the traces for the call without MTP checked. The call went good but the DTMF issue came up. Please find the

Re: [cisco-voip] HC and 7945 with 9-3-1SR1-1

2014-04-01 Thread Mehtab Shinwari
Adam, The HC load rejected means it either cant downgrade or upgrade. 7945 phones with hardware revision 13 and higher must run 9.3.1SR3 or later firmware. So even though you have SR1S it will not downgrade. Check the hardware version on the phone. Get at least SR3 and upload to to CUCM.

Re: [cisco-voip] SIP call issue, call get connected after 10 sec.

2014-04-01 Thread Brian Meade
Raaj, I looked at these traces and see the MTP is being pulled in due to the early offer configuration but would also be needed for the DTMF mismatch: 20:20:05.285 |MediaManager(710186)::wait_AuConnectRequest, CI(48708178,48708179), capCount(11,1), mcNodeId(0,0), xferMode(12,16),

Re: [cisco-voip] HC and 7945 with 9-3-1SR1-1

2014-04-01 Thread Pawlowski, Adam
Mehtab, I must have missed that in a release note somewhere. On the back it looks like it says V14. In the log I have: 3898: DBG 00:39:05.810548 image: phone hw-compat value 12 3899: NOT 00:39:05.811249 image: loadhwc=7 myhwc=12 3900: WRN 00:39:05.811835 image: Load rejected - hardware

Re: [cisco-voip] CIACO VG224 issue

2014-04-01 Thread Sivakumar Donthamchetty
Hi Ryan, Thank you for the suggestion Will try with a different image file. Also, my TFTP server is remote location to the VG224 Regards Siva -Original Message- From: Ryan Huff [mailto:rthconsulta...@gmail.com] Sent: Monday, March 31, 2014 3:59 PM To: s...@dateksystems.com Cc:

Re: [cisco-voip] HC and 7945 with 9-3-1SR1-1

2014-04-01 Thread Jason Aarons (AM)
Usually you can http to the phone web page and see the Hardware Version, etc. From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Pawlowski, Adam Sent: Tuesday, April 01, 2014 1:13 PM To: cisco-voip@puck.nether.net Subject: Re: [cisco-voip] HC and 7945 with 9-3-1SR1-1

[cisco-voip] CURRI

2014-04-01 Thread Erick Wellnitz
I'm not 100% clear on th eapplication server for CURRI. This is a generic web server, correct? ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] CIACO VG224 issue

2014-04-01 Thread Sivakumar Donthamchetty
Hi Amit, Thank you I did it on LAN and it worked. Not sure if it was NETWORK issue or the FLASH as I changed the Flash card as well Regards Siva From: Amit Kumar [mailto:amit3@gmail.com] Sent: Tuesday, April 01, 2014 12:26 PM To: s...@dateksystems.com Subject: Re:

Re: [cisco-voip] CURRI

2014-04-01 Thread Stephen Welsh
Hi Eric, Yes, the Application Server is just a standard web server hosting the relevant XML content to deal with the routing request and respond accordingly. Anthony Holloway provided a sample web page on this API recently:

[cisco-voip] Requested circuit/channel not available

2014-04-01 Thread Hefin James [ahj]
Hi, Started to get this issue this morning with one of our MGCP gateways. Incoming calls are working correctly on an ISDN30, but outgoing calls are being denied, and re-routed via a backup route. Outgoing calls are hitting the gateway, but is getting a 'Requested circuit/channel not available'

[cisco-voip] LUA Scripts

2014-04-01 Thread Heim, Dennis
Has anyone using LUA scripts seen any impact on CPU or memory utilization? Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc. | 314-212-1814 PS Engineering: Innovate Ignite. ___ cisco-voip mailing list

Re: [cisco-voip] Requested circuit/channel not available

2014-04-01 Thread Mehtab Shinwari
James, Whats sh isdn q931 status showing?. Do a show isdn status this will show which channels are open and which ones are out of service. If you have some channels up and its mission critical you can always busy out the bad channels effectivily making a customized fractional pri And yes do