Similar issue until I added
voice-class sip bind control source-interface GigabitEthernet0/2
voice-class sip bind media source-interface GigabitEthernet0/2
to my dial-peers. Now all my peers, including the one to MediaSense, have
binding commands.
On Mon, Apr 4, 2016 at 7:51 AM, Daniel
Jabber apparently monitors packet loss and sets the video rate accordingly,
which is why the quality starts out really low and them improves with the call.
I don't think any of the phones do that, but I believe the 8845 maximum
bandwidth is 2mpbs.
From: cisco-voip
Thanks guy!
On Mon, Apr 4, 2016 at 9:55 AM, Sreekanth wrote:
> You'll need to register them as 3rd party SIP phones. No Native support.
> https://supportforums.cisco.com/discussion/11432196/spa-ip-phones-cucm
>
> Thanks
>
>
> On 4 April 2016 at 18:30, David Zhars
You'll need to register them as 3rd party SIP phones. No Native support.
https://supportforums.cisco.com/discussion/11432196/spa-ip-phones-cucm
Thanks
On 4 April 2016 at 18:30, David Zhars wrote:
> Will the SPA series phones work with UCM 8?
>
> Thanks.
>
>
I'll test it in the lab some time this week but I'm not sure what the problem
could be.
Sent from my iPhone
> On 4 Apr 2016, at 23:27, daniele visaggio wrote:
>
> Thank you for all of your responses.
>
> Sadly i'm still not able to get this working.
>
> @daniel
You can set up Device Mobility for the Expressway-C /32 address which means if
anything is registered in CUCM with the -C IP, it will be placed in a Device
Pool of your choosing. We have implemented this and it works great.
Sent from my iPhone
> On 4 Apr 2016, at 23:39, Lelio Fulgenzi
quick question... how are people restricting the video/audio bandwidth for
Jabber MRA clients or physical phone MRA clients for that matter?
we have not had to use locations or enabled mobility (i think that's the IP
Address based feature) since we have high speed, low latency WAN links
Thank you for all of your responses.
Sadly i'm still not able to get this working.
@daniel
for the time being I have no mediasense server. It's just a microsip client
+ wireshark (this is to simulate the recorder and look up the signaling).
The problem is that I can't see any signaling
Will the SPA series phones work with UCM 8?
Thanks.
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip