I believe when you do 'voice register global' the mode is SRST by default.
So you are not seeing the option of 'mode srst' because you are already in
that mode.
On Sep 14, 2016 1:03 AM, "Sreekanth" wrote:
> Mode esrst does not mandate the use of the SRST manager. You can
Mode esrst does not mandate the use of the SRST manager. You can configure
mode esrst and then configure the router using the CLI.
Esrst provides many more features to the phones over traditional SRST.
Are you not getting the 'id network' option under voice register pool for
mode esrst?
Thanks
You hit the proverbial nail. I spec'ed out replacing our PRIs with SIP with
dedicated layer 3 service and it was double, not including one time fees.
Plus, with all the issues with fax service, we'd end up keeping a couple of
PRIs anyways more than likely.
Now, if we were to get SIP service
I haven't looked at the deployment guide for a while.
What's the location used for?
Sent from my iPhone
On Sep 13, 2016, at 5:29 PM, Anthony Holloway
> wrote:
I just figured it out. I forgot that we have been using
I just figured it out. I forgot that we have been using the below
parameter from when locations where first introduced, and now in 11.7 it
breaks locations. When I remove it, locations work, and when I add it
back, it breaks. It's pretty cut and dry. Try it for yourself.
PS the parameter is
Anthony... W10/J4W 11.7 (BUILD 42920) here and for kicks I put myself on a new
subnet was prompted for a new location name; I went back to the previous subnet
and it displayed my original location.
Is one of the users able to temporarily change subnets (or nat their virtual
adapter in the case
Only thing semi-relevant I found is this-
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCva09037
Might be a new bug.
On Tue, Sep 13, 2016 at 2:59 PM, Anthony Holloway <
avholloway+cisco-v...@gmail.com> wrote:
> We deployed Jabber 11.7 for Windows to a team of people and all of them
> are
depending on how far you want to go:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmfeat/fsgd-712-cm/fsxfer.html#wp1043824
-w
On Sep 13, 2016, at 12:54 PM, Erick Bergquist
> wrote:
Yep, seen that scenario a few dozen times
We deployed Jabber 11.7 for Windows to a team of people and all of them are
reporting the same issues with the Locations feature not working any
longer. If I simply downgrade a client to 11.6, it starts working again.
I searched the bug toolkit with all of my Brian Meade strength I could
summon,
Thank you to everyone that responded with the vendor suggestions and
information. I greatly appreciate your help. John Huston
From: Lelio Fulgenzi
To: Matt Slaga (AM)
Cc: Clifford McGlamry ; John Huston
Is there a way to deploy conventional SRST on the new 4000 series routers
without the SRST manager?
It only gives me the option of mode cme or esrst, and when I try to
configure the pool it asks for a mac or device-id...
Is automatic SRST no longer a thing on the 4000 series?
Jonathan
Good morning all,
I have a question about consistent behavior between Unity Connection
and the UCM when it comes to LDAP integration. When DirSync runs on the UCM, it
will pick up any users that have the same userID as the sync'd object's mapped
attribute. This works pretty well,
I think it depends on quality guarantee versus cost. For call centers (like
Clifford points out), quality would usually be of upmost importance. But for
general usage or college campus environment, maybe quality is not of upmost
importance and cellular-like quality is more than acceptable.
It's your call. Mine is over the internet. I am running a large commercial
connection from Comcast on a cable modem. I do occasionally experience issues
that are likely due to congestion and lack of QOS, but not often.
If I were working in an office where the phones could not tolerate that
The main problem, as Ryan pointed out, is more than likely weak voicemail
passwords. Hackers are able to dial your main number and get an automated
greeting, when they press (asterisk) they get the "welcome to voicemail"
prompt. From there, it's pretty easy to start inputting extensions
15 matches
Mail list logo