Re: [cisco-voip] SPAN Port on ISR4451

2019-08-23 Thread Brian Meade 
I don't think SPAN is actually supported on ISR's.  You could probably do
an embedded packet capture.

On Fri, Aug 23, 2019 at 8:34 AM Reto Gassmann  wrote:

> Hello Group
>
> I try to set up a SPAN Port on a ISR 4451
> (isr4400-universalk9.16.06.06.SPA.bin).
>
> The interface config are configured like this:
>
>
> interface Port-channel13
>
> description *** LAN PO 13 Gig0/0/0 + Gig0/0/1 ***
>
> IP address x.y.z.z 255.255.252.0
>
> no negotiation auto
>
> !
>
> interface GigabitEthernet0/0/0
>
> description *** LAN Gig0/0/0 ***
>
> no ip address
>
> negotiation auto
>
> channel-group 13 mode active
>
> !
>
> interface GigabitEthernet0/0/1
>
> description *** LAN Gig0/0/1 ***
>
> no ip address
>
> negotiation auto
>
> channel-group 13 mode active
>
>
> Now I try to mirror Port-channel13 to GigabitEthernet0/0/2 with this
> command:
>
> gw# conf t
>
> gw (config)#monitor session 1 source interface port-channel 13
>
> But it fails:
>
> Only NGIO switch is supported for Local SPAN.
>
> SPAN Session Validation failed.
>
>
> Has anyone an idea how I can setup a SPAN Port on the ISR?
>
>
> Thanks a lot
>
> Regards Reto
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] automatic updates for Jabber - windows and mac

2019-08-23 Thread Lelio Fulgenzi 
Ok. Gotcha. Read that warning too. Time to reach out to my web server guy.



---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca

www.uoguelph.ca/ccs | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: Pawlowski, Adam 
Sent: Friday, August 23, 2019 12:33 PM
To: Lelio Fulgenzi 
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] automatic updates for Jabber - windows and mac

Yes, there is or was a note somewhere that some web servers don't like the 
characters in the names. I just upload it to a TFTP node and serve it there.

My trouble is knowing which users have rights. If they don't they get prompted 
to install something that doesn't work , and it continues until we update them 
through some other means .

Adam

Get Outlook for iOS


On Fri, Aug 23, 2019 at 12:24 PM -0400, "Lelio Fulgenzi" 
mailto:le...@uoguelph.ca>> wrote:
OK - the release notes include the information regarding long file name for MAC 
install.

[cid:image003.png@01D559BC.E6124B60]

---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca

www.uoguelph.ca/ccs | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: Pawlowski, Adam mailto:aj...@buffalo.edu>>
Sent: Friday, August 23, 2019 12:07 PM
To: Lelio Fulgenzi mailto:le...@uoguelph.ca>>
Cc: cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] automatic updates for Jabber - windows and mac

I have done both for Mac and Windows, though both have become useless in my 
environment due to administrator rights requirements.

Mac users apparently are prompted either for the SU password or to unlock a 
keychain, and they don't want to give that superuser password to Mac customers 
here now, though they will deploy through JAMF.

The MAC one requires that really long file name that often contains !'s and 
such in it, that is available for download.

For example:


   
269866
12.1.1


https://TFTPServer:6972/Jabber/Install_Cisco-Jabber-Mac-12.1.1.269866-76849656-MCwCFGTVpWwR0U2yaAR5Z6MT5T3sdE0HAhQ8luMs_vRUffZajT_h_0Q1ksjqzQ!!.ziphttps://TFTPServer:6972/Jabber/Install_Cisco-Jabber-Mac-12.1.1.269866-76849656-MCwCFGTVpWwR0U2yaAR5Z6MT5T3sdE0HAhQ8luMs_vRUffZajT_h_0Q1ksjqzQ!!.zip%3c/DownloadURL>>
   

It works though as well as it does.

Adam

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] automatic updates for Jabber - windows and mac

2019-08-23 Thread Pawlowski, Adam 
Yes, there is or was a note somewhere that some web servers don't like the 
characters in the names. I just upload it to a TFTP node and serve it there.

My trouble is knowing which users have rights. If they don't they get prompted 
to install something that doesn't work , and it continues until we update them 
through some other means .

Adam

Get Outlook for iOS



On Fri, Aug 23, 2019 at 12:24 PM -0400, "Lelio Fulgenzi" 
mailto:le...@uoguelph.ca>> wrote:

OK - the release notes include the information regarding long file name for MAC 
install.

[cid:image001.png@01D559AD.C08D2EF0]

---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca

www.uoguelph.ca/ccs | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: Pawlowski, Adam 
Sent: Friday, August 23, 2019 12:07 PM
To: Lelio Fulgenzi 
Cc: cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] automatic updates for Jabber - windows and mac

I have done both for Mac and Windows, though both have become useless in my 
environment due to administrator rights requirements.

Mac users apparently are prompted either for the SU password or to unlock a 
keychain, and they don't want to give that superuser password to Mac customers 
here now, though they will deploy through JAMF.

The MAC one requires that really long file name that often contains !'s and 
such in it, that is available for download.

For example:


   
269866
12.1.1


https://TFTPServer:6972/Jabber/Install_Cisco-Jabber-Mac-12.1.1.269866-76849656-MCwCFGTVpWwR0U2yaAR5Z6MT5T3sdE0HAhQ8luMs_vRUffZajT_h_0Q1ksjqzQ!!.ziphttps://TFTPServer:6972/Jabber/Install_Cisco-Jabber-Mac-12.1.1.269866-76849656-MCwCFGTVpWwR0U2yaAR5Z6MT5T3sdE0HAhQ8luMs_vRUffZajT_h_0Q1ksjqzQ!!.zip%3c/DownloadURL>>
   

It works though as well as it does.

Adam

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] automatic updates for Jabber - windows and mac

2019-08-23 Thread Lelio Fulgenzi 
OK - the release notes include the information regarding long file name for MAC 
install.

[cid:image001.png@01D559AD.C08D2EF0]

---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca

www.uoguelph.ca/ccs | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: Pawlowski, Adam 
Sent: Friday, August 23, 2019 12:07 PM
To: Lelio Fulgenzi 
Cc: cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] automatic updates for Jabber - windows and mac

I have done both for Mac and Windows, though both have become useless in my 
environment due to administrator rights requirements.

Mac users apparently are prompted either for the SU password or to unlock a 
keychain, and they don't want to give that superuser password to Mac customers 
here now, though they will deploy through JAMF.

The MAC one requires that really long file name that often contains !'s and 
such in it, that is available for download.

For example:


   
269866
12.1.1


https://TFTPServer:6972/Jabber/Install_Cisco-Jabber-Mac-12.1.1.269866-76849656-MCwCFGTVpWwR0U2yaAR5Z6MT5T3sdE0HAhQ8luMs_vRUffZajT_h_0Q1ksjqzQ!!.ziphttps://TFTPServer:6972/Jabber/Install_Cisco-Jabber-Mac-12.1.1.269866-76849656-MCwCFGTVpWwR0U2yaAR5Z6MT5T3sdE0HAhQ8luMs_vRUffZajT_h_0Q1ksjqzQ!!.zip%3c/DownloadURL>>
   

It works though as well as it does.

Adam

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] automatic updates for Jabber - windows and mac

2019-08-23 Thread Lelio Fulgenzi 

Thanks Adam. I _suspect_ it's use will diminish over time here as well. My 
thought process is this:



  1.  Pilot the lastest version of Jabber, updated through auto-update-pilot / 
jabber XML files (only available to those with admin rights).
  2.  Update those workstations which are SCCM controlled (or equiv)
  3.  Update the global auto-update XML file to catch those remaining

It's not much extra effort to get going or to maintain, so I think I'm ok with 
it. Until, of course, they remove admin rights from those of us who have it.

I read about that "long file name version" elsewhere - but I can't seem to find 
it on CCO downloads. I only see two files available. The ZIP file doesn't have 
it either.

Do _we_ have to rename it?

Cisco Jabber for Mac (Automatic update installation file)
CiscoJabberMac-12.6.1.284405-AutoUpdate.zip
13-Jun-2019
102.25 MB
Cisco Jabber for Mac (Manual Installation file)
CiscoJabberMac-12.6.1.284405.pkg
13-Jun-2019
102.63 MB

---
Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1
519-824-4120 Ext. 56354 | le...@uoguelph.ca

www.uoguelph.ca/ccs | @UofGCCS on Instagram, 
Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

From: Pawlowski, Adam 
Sent: Friday, August 23, 2019 12:07 PM
To: Lelio Fulgenzi 
Cc: cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] automatic updates for Jabber - windows and mac

I have done both for Mac and Windows, though both have become useless in my 
environment due to administrator rights requirements.

Mac users apparently are prompted either for the SU password or to unlock a 
keychain, and they don't want to give that superuser password to Mac customers 
here now, though they will deploy through JAMF.

The MAC one requires that really long file name that often contains !'s and 
such in it, that is available for download.

For example:


   
269866
12.1.1


https://TFTPServer:6972/Jabber/Install_Cisco-Jabber-Mac-12.1.1.269866-76849656-MCwCFGTVpWwR0U2yaAR5Z6MT5T3sdE0HAhQ8luMs_vRUffZajT_h_0Q1ksjqzQ!!.ziphttps://TFTPServer:6972/Jabber/Install_Cisco-Jabber-Mac-12.1.1.269866-76849656-MCwCFGTVpWwR0U2yaAR5Z6MT5T3sdE0HAhQ8luMs_vRUffZajT_h_0Q1ksjqzQ!!.zip%3c/DownloadURL>>
   

It works though as well as it does.

Adam

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] automatic updates for Jabber - windows and mac

2019-08-23 Thread Pawlowski, Adam 
I have done both for Mac and Windows, though both have become useless in my 
environment due to administrator rights requirements.

Mac users apparently are prompted either for the SU password or to unlock a 
keychain, and they don't want to give that superuser password to Mac customers 
here now, though they will deploy through JAMF.

The MAC one requires that really long file name that often contains !'s and 
such in it, that is available for download.

For example:


   
269866
12.1.1


https://TFTPServer:6972/Jabber/Install_Cisco-Jabber-Mac-12.1.1.269866-76849656-MCwCFGTVpWwR0U2yaAR5Z6MT5T3sdE0HAhQ8luMs_vRUffZajT_h_0Q1ksjqzQ!!.zip
   

It works though as well as it does.

Adam

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[cisco-voip] SPAN Port on ISR4451

2019-08-23 Thread Reto Gassmann 
Hello Group

I try to set up a SPAN Port on a ISR 4451
(isr4400-universalk9.16.06.06.SPA.bin).

The interface config are configured like this:


interface Port-channel13

description *** LAN PO 13 Gig0/0/0 + Gig0/0/1 ***

IP address x.y.z.z 255.255.252.0

no negotiation auto

!

interface GigabitEthernet0/0/0

description *** LAN Gig0/0/0 ***

no ip address

negotiation auto

channel-group 13 mode active

!

interface GigabitEthernet0/0/1

description *** LAN Gig0/0/1 ***

no ip address

negotiation auto

channel-group 13 mode active


Now I try to mirror Port-channel13 to GigabitEthernet0/0/2 with this
command:

gw# conf t

gw (config)#monitor session 1 source interface port-channel 13

But it fails:

Only NGIO switch is supported for Local SPAN.

SPAN Session Validation failed.


Has anyone an idea how I can setup a SPAN Port on the ISR?


Thanks a lot

Regards Reto
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip