Hi everyone,
I'm trying to connect an ATA 190 to a Logison Paging Module a vendor installed
to get paging functionality at a site. The vendor has stated the following:
"Upon dialing the specific extension assigned to paging, this line is "live"
(i.e. answers the line A.K.A. Auto Answer) to
David,
Also if it’s Unity Connection, I’ve had some success in the past restarting the
Notifier service
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Charles Goldsmith
Sent: August-03-16 10:05 AM
To: David Zhars
Cc: cisco-voip@puck.nether.net
Subject: Re:
That's great! Thank you so much Matthew, I appreciate it!
Sincerely,
Vince
-Original Message-
From: Matthew Loraditch [mailto:mloradi...@heliontechnologies.com]
Sent: November-03-16 8:08 AM
To: Cannizzaro, Vince; 'Matthew Collins'; James Andrewartha;
cisco-voip@puck.nether.net
Hi Jon,
Go into Settings > 5. Admin Settings > 4. Reset Settings > 1. Reset Device
-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Jon
Fox
Sent: August-10-17 4:38 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] 88XX Soft Reset
Hello
Could it be connecting to an older switch that is only Cisco pre-dot power
standard?
Original message
From: Anthony Holloway
Date: 2018-02-11 12:53 PM (GMT-05:00)
To: Vinnie Dao
Cc: cisco-voip@puck.nether.net
Subject:
We did a similar upgrade from CUCM 9.1.2 to 11.5 using PCD and it didn't
require communication to PLM.
We took care of the licensing the following day.
I hope this helps and good luck with the upgrade,
Vince
Original message
From: NateCCIE
Date: 2018-08-20 6:05 PM
What about the option on the device page “Show All Calls on Primary Line” ,
setting it to Enabled, that could help.
Thanks,
Vince
From: cisco-voip On Behalf Of Reto Gassmann
Sent: March 20, 2019 5:54 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] 8851: always use first line for
Hi Tim,
The way I’ve done it is going into RTMT > AuditLog Viewer > Select the
Publisher from the drop down list. Under Audit App Logs expand to see the
different days worth of logs that have been archived.
Next, sort by Resource Accessed, and scroll to “Cisco Self Service”. There you
should