[cisco-voip] Supervisory Disconnect on ATA 190

[Cannizzaro, Vince]

Hi everyone,

I'm trying to connect an ATA 190 to a Logison Paging Module a vendor installed 
to get paging functionality at a site.  The vendor has stated the following:


"Upon dialing the specific  extension assigned to paging,  this line is "live" 
(i.e. answers the line A.K.A. Auto Answer) to complete the connection to the 
Logison NCP and enables the page to be broadcast on all the Logison Speakers 
you have assigned to that specific paging zone.  The line must also be 
programmed with Supervisor Disconnect (this ensures that the page is 
disconnected once the user has stopped talking and hangs up)."

As it stands, as soon as I plug in the analog line into the ATA you can hear 
dial tone over the speakers and then eventually times out.
I can't see where to configure supervisory disconnect on an ATA 190.  I can't 
use a router FXS port as the router is in another network closet.
Am I missing something?

Thank you,
Vince

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] MWI Light UCM 8

[Cannizzaro, Vince]

David,
Also if it’s Unity Connection, I’ve had some success in the past restarting the 
 Notifier service

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of 
Charles Goldsmith
Sent: August-03-16 10:05 AM
To: David Zhars
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] MWI Light UCM 8

David, if you are on Unity Connection, then its under Telephony Integrations > 
Phone System.  There is a button labeled Run to Synchronize all MWIs on this 
phone system.

It's been many moons since I've had to touch Unity, and don't remember the menu 
system, nor do I have access to one.

On Tue, Aug 2, 2016 at 7:28 PM, David Zhars 
> wrote:
Getting multiple reports from users that the MWI light is being 
mischievousstaying on when they have no messages, and not coming on when 
they do have messages.
I understand there is some sort of system refresh I can do, but can't find it.  
We use UCM and Unity 8.0
This just started happening after years of perfect behavior
Dave

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Future of Jabber .......

[Cannizzaro, Vince]

That's great!  Thank you so much Matthew, I appreciate it!  

Sincerely,
Vince

-Original Message-
From: Matthew Loraditch [mailto:mloradi...@heliontechnologies.com] 
Sent: November-03-16 8:08 AM
To: Cannizzaro, Vince; 'Matthew Collins'; James Andrewartha; 
cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Future of Jabber ...

Go here to join CCP if you aren't in it: 
https://communities.cisco.com/community/technology/customer-connection
Then here 
https://communities.cisco.com/community/technology/customer-connection/ccp-private/ccp-collaboration
To see the briefings list and schedule once you are in.

Matthew G. Loraditch - CCNP-Voice, CCNA-R, CCDA Network Engineer Direct 
Voice: 443.541.1518

Facebook | Twitter | LinkedIn | G+


-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of 
Cannizzaro, Vince
Sent: Thursday, November 3, 2016 8:03 AM
To: 'Matthew Collins' <mcoll...@block.co.uk>; James Andrewartha 
<jandrewar...@ccgs.wa.edu.au>; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Future of Jabber ...

Hi Matthew,

Thank you for sharing that update.  May I ask if I can have a link to that 
roadmap session?

Kind regards,
Vince

-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of 
Matthew Collins
Sent: November-02-16 4:36 AM
To: James Andrewartha; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Future of Jabber ...

Received this in one of the Cisco Customer Connection: Briefing Registration 
invites last week

"November 17, 2016 - Revised Jabber Roadmap Update Cisco Collab Technology 
Group listened to and has acted upon your feedback on the Cisco Jabber roadmap 
that was delivered on September 15, 2016! Please join us to hear about the 
revised Jabber roadmap for post R11.8 capabilities that will include iOS 
Voice/Video Push notifications (in addition to IM/P notifications in R11.8), 
Multi-Line call support, Contact Center Feature enhancements, and more features 
and capabilities!"

Regards

Matthew Collins 


-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of James 
Andrewartha
Sent: 02 November 2016 06:45
To: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Future of Jabber ...

On 03/10/16 02:11, Lelio Fulgenzi wrote:
> I've seen only one update in the forums, and while it's a good start, 
> there's still some outstanding issues people have concerns with.

Reading the forum now, it looks like they've listened and are going to add 
support IM/phone push notifications by the time iOS 11 comes out.

--
James Andrewartha
Network & Projects Engineer
Christ Church Grammar School
Claremont, Western Australia
Ph. (08) 9442 1757
Mob. 0424 160 877
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] 88XX Soft Reset

[Cannizzaro, Vince]

Hi Jon,

Go into Settings > 5. Admin Settings > 4. Reset Settings > 1. Reset Device

-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Jon 
Fox
Sent: August-10-17 4:38 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] 88XX Soft Reset

Hello All,

Is there soft reset key press sequence on the Cisco 88XX (8841/8851) Devices.

I remember that there was the **#** key press on the 7940/7940 devices. is 
there a similar on for these newer phone models?

Many thanks


___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Cisco 7975 or 7965 stuck at speaker button Red LED, sorry if this is a repost

[Cannizzaro, Vince]

Could it be connecting to an older switch that is only Cisco pre-dot power 
standard?


 Original message 
From: Anthony Holloway 
Date: 2018-02-11 12:53 PM (GMT-05:00)
To: Vinnie Dao 
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Cisco 7975 or 7965 stuck at speaker button Red LED, 
sorry if this is a repost

Did you already look through the bug search tool?

https://bst.cloudapps.cisco.com/bugsearch/search?kw=stuck%20boot=prdNm=269065653=anfr

What version of firmware is it, and what can you do to clear the problem?  
I.e., Power cycle the phone?

On Sun, Feb 11, 2018 at 11:49 AM Vinnie Dao 
> wrote:
Greeting to all,

Lately, I have some CP-7965 and CP-7975 stuck at speaker button during boot up 
as red LED and stay there for long time.  Has anyone got this issue and know 
how to fix it?

Please advise where to go from here to resolve this issue, and thank you very 
much for your time.

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] PCD 12.1.1 for CUCM 6.5 PCD Migration

[Cannizzaro, Vince]

We did a similar upgrade from CUCM 9.1.2 to 11.5 using PCD and it didn't 
require communication to PLM.

We took care of the licensing the following day.

I hope this helps and good luck with the upgrade,
Vince


 Original message 
From: NateCCIE 
Date: 2018-08-20 6:05 PM (GMT-05:00)
To: "'Jason Aarons (Americas)'" , 'cisco-voip' 

Subject: Re: [cisco-voip] PCD 12.1.1 for CUCM 6.5 PCD Migration

I don’t think PCD touches licensing.

-Nate
From: cisco-voip  On Behalf Of Jason Aarons 
(Americas)
Sent: Monday, August 20, 2018 3:45 PM
To: cisco-voip (cisco-voip@puck.nether.net) 
Subject: [cisco-voip] PCD 12.1.1 for CUCM 6.5 PCD Migration


I have a customer with CUCM  6.1.5.11900-1 that I plan to upgrade to CUCM 
11.5.1SU5 (Matrix says it is supported, all 7925 phones/loads are good).  I 
plan to use PCD 12.1.1 with PCD Migration.

Does PCD 12.1.1 need to talk to a PLM/Smart Licensing?  The PLM servers are 
still 11.5

-jason



This email and all contents are subject to the following disclaimer:
"http://www.dimensiondata.com/emaildisclaimer;
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] 8851: always use first line for outbound calls with multiline

[Cannizzaro, Vince]

What about the option on the device page “Show All Calls on Primary Line” , 
setting it to Enabled, that could help.

Thanks,
Vince

From: cisco-voip  On Behalf Of Reto Gassmann
Sent: March 20, 2019 5:54 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] 8851: always use first line for outbound calls with 
multiline

Hello Group

we have some IP Phones (8851) with two lines. For outgoing calls the first line 
is always used.
However, if the user receives a call on the second line (This is his secret 
privat line), the next outgoing call is initiated from the second line and 
sends the wrong (privat) number.
Is it possible to configure the phone that allways and automatically the first 
line is used for an outgoing call.
We have CUCM 10.5 and 8851 IP Phones.

Thanks a lot
Regards Reto
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Hopefully this is an easy question.... user activity reporting..

[Cannizzaro, Vince]

Hi Tim,

The way I’ve done it is going into RTMT > AuditLog Viewer > Select the 
Publisher from the drop down list.  Under Audit App Logs expand to see the 
different days worth of logs that have been archived.
Next, sort by Resource Accessed, and scroll to “Cisco Self Service”.  There you 
should see the users under the UserID column

[cid:image001.jpg@01D819CC.6A4B1D40]
Vince Cannizzaro
Network Analyst I
Information Technology Services
Voice & Infrastructure
(905) 546-2424  Ext. 3927
[cid:image002.png@01D819CC.6A4B1D40]


From: cisco-voip  On Behalf Of Tim Reimers
Sent: Friday, February 4, 2022 1:22 PM
To: cisco-voip 
Subject: [cisco-voip] Hopefully this is an easy question user activity 
reporting..

Hopefully this is an easy question user activity reporting..

I have an instance of UCM 9.0 still running.. sadly, totally end of support, 
etc..

Does anyonw know whether it is possible to get a list of users who've recently 
used the
CCMUser page?

We're trying to figure out who still uses that to forward/unforward phones..
Have bever been asked that before..
There doesn't seem to be an "user audit log" in the canned Reports..

Again, this is for the unsupported old UCM 9.0 platform...

Thanks Tim

--

Quis custodiet  
ipsos nexus

Tim Reimers

Network Administrator

I.T Services

City of Asheville

treim...@ashevillenc.gov

(desk) 828-259-5512

(cell)   828-552-1585

Please do NOT use the contact information above for unsolicited sales contacts.

All unsolicited sales calls > /dev/null
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip