Lelio,
From the sounds of it looks like you already have MRA expressways and want to
enable B2B on the same for VC/SIP end points registered to CUCM - you will need
-
1) If both the MRA and B2B go to same CUCM then the ports for neighbour zone
(between Exp-C and CUCM need to be different from
Hybrid Media Node also renamed to Video Mesh. In the middle of a design, by the
time it is out product names will already be looking different
Cisco’s collab - (specially meetings) strategy has never been stable, frequent
changes, lots of overlapping products...
Sent from my iPhone
>
HI Guys,
I have a quick question on conference bridge latency measurements. When we try
to achieve a good quality audio on a conference call like a normal one-to-one
normal audio call (with one way latency within 150 ms) – how is the the latency
calculated –
1) Latency from Bridge (say in
Yes Brian is right.
However, to be more clear:
1)Explicitly configured Policer is active all the time, you will never
be allowed to go above the configured limit i.e. interface congested or not
2)But if you use LLQ – *priority* command, it has an implicit Policer,
that *does not*
Dana - Have a look at this thread, someone asked the same thing a while ago on
cisco support forum:
https://supportforums.cisco.com/discussion/12523251/how-remove-video-sdp-header-sip
-Terry
Sent from my iPhone
On 25 Aug 2015, at 12:21 pm, Tong, Dana dana.t...@team.telstra.com wrote:
Hi
No worries - thanks Ryan for replying.
Terry
On Wed, May 6, 2015 at 11:14 PM, Ryan Burtch rburt...@gmail.com wrote:
Seems pretty neat, but haven't heard of this.
Sincerely,
Ryan Burtch
On Tue, May 5, 2015 at 10:28 PM, Terry Cheema terry.che...@gmail.com
wrote:
Someone once
,
Tim
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Terry Cheema
Sent: Wednesday, 11 March 2015 1:10 PM
To: cisco-voip voyp list
Subject: [cisco-voip] SBC/SIP Trunk Design queries
Hi List,
I am working on to finalize the SBC vendor
keen to hear other peoples experience too.
It's an interesting topic!
Cheers,
Tim.
From: Terry Cheema terry.che...@gmail.com
Sent: Wednesday, 11 March 2015 5:09 PM
To: Tim Smith
Cc: cisco-voip voyp list
Subject: Re: [cisco-voip] SBC/SIP Trunk Design queries
Tim
, just my thoughts on things you can
consider.
I like both, and will continue to work on both!
Cheers,
Tim
*From:* cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] *On Behalf
Of *Terry Cheema
*Sent:* Wednesday, 11 March 2015 1:10 PM
*To:* cisco-voip voyp list
*Subject
Hi List,
I am working on to finalize the SBC vendor for one of our environments. I
have a couple of queries related to the SIP Trunk design and SBC vendor
choices(basically CUBE vs Acme Packet). I would really appreciate if anyone
with SIP Trunking/SBC expertise (Cisco/Acme Packet) can provide
Thank you all - will go with 10.5.
Sent from my iPhone
On 9 Jul 2014, at 1:57 am, Matthew Loraditch
mloradi...@heliontechnologies.com wrote:
I'm trying 10.5 out a few smaller places and having no issues. My setups are
usually pretty vanilla, but most things are working ok. Did find a
11 matches
Mail list logo