Re: [cisco-voip] isr dsp in wrong port?

2021-03-23 Thread Matthew Loraditch
I’ve not seen it, but if you are driving 4 PRIs you will definitely  have to do 
it. The DSPs are the same type just different capacities, but the DSPs  used 
for TDM to IP conversion that a PRI needs must be on the PRI NIM in an ISR4XXX. 
You can still use the extra capacity for transcoding etc.


Matthew Loraditch
Sr. Network Engineer
p: 443.541.1518
w: www.heliontechnologies.com | e: mloradi...@heliontechnologies.com
From: cisco-voip  On Behalf Of Scott Voll
Sent: Tuesday, March 23, 2021 4:47 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] isr dsp in wrong port?

[EXTERNAL]

Has anyone dealt with the PVDM's being put on the Motherboard and it's supposed 
to be on the card?

I got a new 4431 and the 256 was put on the motherboard and the 32 was put on 
the 4 PRI port card.  TAC is advising to switch the location of the two PVDM 
cards.

Does this sound correct?

TIA

Scott

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


Re: [cisco-voip] isr dsp in wrong port?

2021-03-23 Thread Buchanan, James
It all depends on how it was ordered. When the BOM is created, the reseller has an option to decide where the PVDM goes. I’d say they built the BOM incorrectly. From: Scott VollSent: 23 March 2021 20:50To: cisco-voip@puck.nether.netSubject: [cisco-voip] isr dsp in wrong port? Has anyone dealt with the PVDM's being put on the Motherboard and it's supposed to be on the card? I got a new 4431 and the 256 was put on the motherboard and the 32 was put on the 4 PRI port card.  TAC is advising to switch the location of the two PVDM cards. Does this sound correct? TIA Scott  
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


[cisco-voip] isr dsp in wrong port?

2021-03-23 Thread Scott Voll
Has anyone dealt with the PVDM's being put on the Motherboard and it's
supposed to be on the card?

I got a new 4431 and the 256 was put on the motherboard and the 32 was put
on the 4 PRI port card.  TAC is advising to switch the location of the two
PVDM cards.

Does this sound correct?

TIA

Scott
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip