[mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Frank
Arrasmith
Sent: Thursday, April 06, 2017 11:40 AM
To: Scott Voll <svoll.v...@gmail.com>
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Question regarding Rightfax Configuration and
"Transmission Error"
On average
On average or failure rate is below 5%, however there are some senders with
failure rates as high as 80%. We usually reach out to them and ask them to
turn off ECM and some transmit speed to 9600. In response to some of the
comments.
We have MGCP and SIP internally with 99.9% success rate.
We
do Faxes without issue.
>>
>>
>>
>> Thank You,
>>
>>
>>
>> Neal Haas
>>
>>
>>
>> *From:* cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] *On
>> Behalf Of *Brian Meade
>> *Sent:* Thursday, April 6, 2017 7:
her.net] *On Behalf
> Of *Brian Meade
> *Sent:* Thursday, April 6, 2017 7:09 AM
> *To:* Frank Arrasmith <frank.arrasm...@gmail.com>
> *Cc:* cisco-voip@puck.nether.net
> *Subject:* Re: [cisco-voip] Question regarding Rightfax Configuration and
> "Transmission Erro
...@puck.nether.net] On Behalf Of Brian
Meade
Sent: Thursday, April 6, 2017 7:09 AM
To: Frank Arrasmith <frank.arrasm...@gmail.com>
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Question regarding Rightfax Configuration and
"Transmission Error"
I've had the most luck
I've had the most luck turning ECM off and running RightFax at only 9600.
Faxes are slower but usually higher quality and less failures.
On Wed, Apr 5, 2017 at 8:06 PM, Frank Arrasmith
wrote:
> Calling all Rightfax gurus,
>I have the following question regarding
Wow Frank, that is a lot of troubleshooting, and a great run down.
Can I ask what your failure rate is?
We have about a 2-4% failure rate and have decided not to troubleshoot
those as they tend to be a Telco issue between us and the sender. We use a
lot of toll bypass so if it doesn't work over
Calling all Rightfax gurus,
I have the following question regarding the Rightfax configuration and
transmission errors.
Background:
My enterprise has CUCM 10.5 with a pretty dialed in Fax/T38 setup over SIP
and MGCP gateways. For the most part, faxing is pretty solid inbound and
outbound to