So it's been a while since I've had to test equipment. I fired up a CUCM 9.1.2
system, attached a few 7942's in SIP mode, a few third party devices. Set
regions, location bandwidth, partition, CSS etc.
I cannot however seem to transfer a call. I hit transfer on a 7942, dial a
number, hang
So the Refer is coming in for transferring to extension 1001. Is that
extension in the None partition? There's no partitions listed in the
partition list so that extension needs to either be in the None partition
or you need to set the Re-Routing CSS on the phone since that's what's used
in a
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] SIP transfer problems - CUCM 9.1.2
So it's been a while since I've had to test equipment. I fired up a CUCM 9.1.2
system, attached a few 7942's in SIP mode, a few third party devices. Set
regions, location bandwidth, partition, CSS etc.
I
Yea, you can't hang up the call on a refer transfer until CUCM sends the
Notify with the 200OK right after the Refer is accepted at least on a SIP
Trunk Refer. I would imagine it would work fairly similar on the 79XX
running SIP. Might be worth just waiting like 10 seconds before hanging up
and