Does anyone else have this this setup, when one or the other is triggered
they will listen to each other to relay notifications?
application examples? i would love to see how this can be used boyond what
we have for our campus.
target application: weather notifactions, emergency response, evac, a
and if so, do I need to modify this portiopn of my cube configuration?,
This guy seems to describe what I am seeing on our main campus
https://supportforums.cisco.com/t5/video-over-ip/sip-
trunk-call-hold-fails-no-audio-no-resume-no-sdp-from-cube/td-p/2214595
!!!
voice service vo
Have a read through this thread:
https://supportforums.cisco.com/t5/ip-telephony/issues-with-cucm-sip-trunk-and-hold/td-p/2395620
Sent from my iPhone
On Feb 22, 2018, at 13:23, Jonatan Quezada
mailto:jonatan.quez...@chemeketa.edu>> wrote:
and if so, do I need to modify this portiopn of my cube
We'll really need a "debug ccsip messages" for an entire good/bad call to
see what part the carrier is getting hung up on. MTP Required would
probably be a good fix but it's a bit bad practice to rely on MTPs where
not necessary. MTPs definitely make troubleshooting more difficult.
On Thu, Feb 2
Hey Jon had the exact same issue with the same carrier.
Because they use mpls the qos policy was not correct on the carrier side so we
exceeded it at timesStupid if you ask me when the line is dedicated for
voice
Stay away from mtp if you can. The gateway config should be set to the best
Here here!
MTP is basically creating a known rendezvous point that both call legs can
reach and there is a guard at the gate that says, “pay no mind to the man
behind the curtain, it’s just magic”. traces and debugs would show you what’s
going on but you got to go through a ton more effort to g