On Sat, 5/3/14, Dennis Peterson denni...@inetnw.com wrote:
Subject: Re: [clamav-users] clamav stops boot
To: ClamAV users ML clamav-users@lists.clamav.net
Date: Saturday, May 3, 2014, 8:59 PM
On 5/2/14, 8:34 AM, Greg Mueller
wrote:
Thank you for your response
I did not install clamav
...@inetnw.com wrote:
Subject: Re: [clamav-users] clamav stops boot
To: ClamAV users ML clamav-users@lists.clamav.net
Date: Saturday, May 3, 2014, 8:59 PM
On 5/2/14, 8:34 AM, Greg Mueller
wrote:
Thank you for your response
I did not install clamav, it came on a used
computer
On 5/2/14, 8:34 AM, Greg Mueller wrote:
Thank you for your response
I did not install clamav, it came on a used computer.(not the one I'm using
to write this email)
I can't get that computer to boot at all so I can't upgrade.
I just need to get the computer to go past the block in the boot
I just got a new/used computer. It has Debian on it and was booting fine. But
now when it starts to boot it gets this message.
*
This Version of the clamavb engine is outdated
Don't Panic Read
The ClamAV engine won't update itself automatically. You will have to
manually perform that operation. The latest version of ClamAV (version
0.98.1) can be downloaded here:
http://www.clamav.net/lang/en/download/sources/
- Alain
On Fri, May 2, 2014 at 11:18 AM, Greg Mueller gcm4...@yahoo.com
On 5/2/2014 11:21 AM, Alain Zidouemba wrote:
The ClamAV engine won't update itself automatically. You will have to
manually perform that operation. The latest version of ClamAV (version
0.98.1) can be downloaded here:
http://www.clamav.net/lang/en/download/sources/
Or, if ClamAV was installed
Alain Zidouemba azidoue...@sourcefire.com wrote:
The ClamAV engine won't update itself automatically. You will have to
manually perform that operation. The latest version of ClamAV (version
0.98.1) can be downloaded here:
http://www.clamav.net/lang/en/download/sources/
However, as the OP is
)
On Fri, 5/2/14, Bowie Bailey bowie_bai...@buc.com wrote:
Subject: Re: [clamav-users] clamav stops boot
To: clamav-users@lists.clamav.net
Date: Friday, May 2, 2014, 8:25 AM
On 5/2/2014 11:21 AM, Alain Zidouemba
wrote:
The ClamAV engine won't update
Ctrl + c?
-Original Message-
From: clamav-users-boun...@lists.clamav.net
[mailto:clamav-users-boun...@lists.clamav.net] On Behalf Of Greg Mueller
Sent: 02 May 2014 16:34
To: ClamAV users ML
Subject: Re: [clamav-users] clamav stops boot
Thank you for your response
I did
On 02/05/14 16:18, Greg Mueller wrote:
I just got a new/used computer. It has Debian on it and was booting fine. But
now when it starts to boot it gets this message.
If not Ctrl-c try q
*
This Version of the
On Friday 02 May 2014 12:04:25 Alain Zidouemba did opine:
The ClamAV engine won't update itself automatically. You will have to
manually perform that operation. The latest version of ClamAV (version
0.98.1) can be downloaded here:
http://www.clamav.net/lang/en/download/sources/
- Alain
Can you contact the previous owner and ask them if there is something
custom running at boot?
Is there anything too important on the computer to do a fresh install?
Are you at a terminal prompt, can you type commands?
On Fri, May 2, 2014 at 12:07 PM, Gene Heskett ghesk...@wdtv.com wrote:
On
I can't get to anything yet.
It won't go past the out of date adviso
On Fri, 5/2/14, Douglas Goddard dgodd...@sourcefire.com wrote:
Subject: Re: [clamav-users] clamav stops boot
To: ClamAV users ML clamav-users@lists.clamav.net
Date: Friday, May
On 5/2/2014 12:16 PM, Greg Mueller wrote:
I can't get to anything yet.
It won't go past the out of date adviso
It has to be something else causing the hang. That notice is just a
warning message and should not affect the boot process.
Have you tried booting into single user mode? I don't
...@buc.com wrote:
Subject: Re: [clamav-users] clamav stops boot
To: clamav-users@lists.clamav.net
Date: Friday, May 2, 2014, 9:25 AM
On 5/2/2014 12:16 PM, Greg Mueller
wrote:
I can't get to anything yet.
It won't go past the out of date adviso
It has to be something else causing the hang
On 5/2/2014 12:32 PM, Greg Mueller wrote:
I found a selection in the GRUB page that is for recovery (it says) so I'm
trying various options from that.
CTR-C didn't work nor CTRL-Q
If it's using Grub to boot, then you should be able to get to single
user mode by editing the grub boot
I will try that
Thanks
On Fri, 5/2/14, Bowie Bailey bowie_bai...@buc.com wrote:
Subject: Re: [clamav-users] clamav stops boot
To: clamav-users@lists.clamav.net
Date: Friday, May 2, 2014, 9:49 AM
On 5/2/2014 12:32 PM, Greg Mueller
wrote:
I
On Friday, May 02, 2014 08:18:34 Greg Mueller wrote:
I just got a new/used computer. It has Debian on it and was booting fine.
But now when it starts to boot it gets this message.
*
This Version of the clamavb engine
On Friday, May 02, 2014 11:25:54 Bowie Bailey wrote:
On 5/2/2014 11:21 AM, Alain Zidouemba wrote:
The ClamAV engine won't update itself automatically. You will have to
manually perform that operation. The latest version of ClamAV (version
0.98.1) can be downloaded here:
On May 2, 2014, at 9:32 AM, Greg Mueller gcm4...@yahoo.com wrote:
CTR-C didn't work nor CTRL-Q
It’s not CTRL-Q, just the Q key.
-Al-
--
Al Varnell
Mountain View, CA
___
Help us build a comprehensive ClamAV guide:
I restarted the little computer and will let it run until it either boots or
it's tomorrow
It shouldn't take any longer than overnight should it?
On Fri, 5/2/14, Scott Kitterman ubu...@kitterman.com wrote:
Subject: Re: [clamav-users] clamav
it?
On Fri, 5/2/14, Scott Kitterman ubu...@kitterman.com wrote:
Subject: Re: [clamav-users] clamav stops boot
To: clamav-users@lists.clamav.net
Date: Friday, May 2, 2014, 10:34 AM
On Friday, May 02, 2014 08:18:34 Greg
Mueller wrote:
I just got a new/used computer. It has
22 matches
Mail list logo
