> So will this fix my quitting issue too or is my problem elsewhere? It
> seems incredible to me that I'm the only one having this problem.
TBH, I don't remember what was your original problem. Because of the
top-posting it was not possible to me to follow the whole thread carefully.
I am seei
>no, no need to reinstall. One of the recent cvd had the wrong
>functionality level. We published an update and now the warning should
>be gone.
>Sorry for the trouble.
Thanks a lot, Luca !
Thx & Rgds,
Awie
- Original Message -
From: "Luca Gibelli" <[EMAIL PROTECTED]>
To: "ClamAV user
David Kenneally wrote:
Hello!
I'm running version 0.88.5. I'm running into a problem with freshclam
hanging up occasionally during our hourly updates. I see the process
still running:
26347 ?S 0:00 awk -v progname=/etc/cron.hourly/freshclam
progname {? print progname ":\n"
On Thu, Nov 02, 2006 at 04:16:06PM -0800, David Kenneally said:
> Stephen Gran wrote:
> >On Thu, Nov 02, 2006 at 01:32:55PM -0800, David Kenneally said:
> >>Hello!
> >>I'm running version 0.88.5. I'm running into a problem with freshclam
> >>hanging up occasionally during our hourly updates.
> >
>
Stephen Gran wrote:
On Thu, Nov 02, 2006 at 01:32:55PM -0800, David Kenneally said:
Hello!
I'm running version 0.88.5. I'm running into a problem with freshclam
hanging up occasionally during our hourly updates.
[...]
Any ideas?
Yes. strace (or truss, or whatever syscall tracer your OS h
On Thu, Nov 02, 2006 at 01:32:55PM -0800, David Kenneally said:
> Hello!
> I'm running version 0.88.5. I'm running into a problem with freshclam
> hanging up occasionally during our hourly updates.
[...]
> Any ideas?
Yes. strace (or truss, or whatever syscall tracer your OS has) the
stuck proc
On Fri, 3 Nov 2006 00:37:40 +0100
"Michael Grant" <[EMAIL PROTECTED]> wrote:
> > That's a known issue and will be corrected in RC3.
>
> So will this fix my quitting issue too or is my problem elsewhere? It
> seems incredible to me that I'm the only one having this problem.
TBH, I don't remember
That's a known issue and will be corrected in RC3.
So will this fix my quitting issue too or is my problem elsewhere? It
seems incredible to me that I'm the only one having this problem.
Please don't top-post.
damn, sorry about that.
___
http://lu
On Fri, 3 Nov 2006 00:20:08 +0100
"Michael Grant" <[EMAIL PROTECTED]> wrote:
> Here's another clue below. It's freshclam that is removing the
> daily.inc dir. And when this dir doesn't exist, freshclam-milter
> exits. This seems wrong, shouldn't freshclam perhaps download to a
> new temporary d
Here's another clue below. It's freshclam that is removing the
daily.inc dir. And when this dir doesn't exist, freshclam-milter
exits. This seems wrong, shouldn't freshclam perhaps download to a
new temporary directory and then upon successful download then
install? Isn't it better to have a (
Hello Awie,
> My ClamAV version is 0.88.5, but I got message below.
>
> Should I re-download and re-install the 0.88.5 or using the RC (that
> unstable) version?
no, no need to reinstall. One of the recent cvd had the wrong
functionality level. We published an update and now the warning should
Hello!
I'm running version 0.88.5. I'm running into a problem with freshclam
hanging up occasionally during our hourly updates. I see the process
still running:
26347 ?S 0:00 awk -v progname=/etc/cron.hourly/freshclam
progname {? print progname ":\n"? progname="";
Dear ClamAV users,
If you are using ClamAV in your business and you are happy about it, I would
like to call upon you to make a regular donation to the ClamAV project. Those
folks have spent great deal of time to provide us with timely virus updates and
I hate to see they have to pay out o
My ClamAV version is 0.88.5, but I got message below.
Should I re-download and re-install the 0.88.5 or using the RC (that
unstable) version?
Thx & Rgds,
Awie
--SNIP--
ClamAV update process started at Fri Nov 3 04:32:43 2006
Querying current.cvd.clamav.net
TTL: 844
Software version from DNS:
Look at permissions on the parent directory, and it's parent
Steve
On Thu, 2 Nov 2006 20:41:08 +0100
"Michael Grant" <[EMAIL PROTECTED]> wrote:
> Even after I create this directory by hand and make it owned by
> clamav, group clamav clamav-milter still quits with this same error.
> Stranger
* On 02/11/06 16:01 +0100, aCaB wrote:
| Odhiambo Washington wrote:
| > config.status: error: cannot find input file: libclamav/Makefile.in
|
| Weird! The file's definitely there and wasn't touched in 8 days now...
I grabbed CVS later in the day and it worked.
-Wash
http://www.netmeister.org/n
Even after I create this directory by hand and make it owned by
clamav, group clamav clamav-milter still quits with this same error.
Stranger still, clamav-milter or something, removes this directory and
then complains it's not there.
I'd be really happy if someone had some ideas here, this is dr
On Thu, 2006-11-02 at 11:40 -0600, Ken Jones wrote:
> All,
>
> I have run into a problem building 90rc2 on Solaris 10 x86.
> The error is in clamav-milter/clamav-milter.c
> If I define SESSION, I get the following:
> clamav-milter.c: In function `main':
> clamav-milter.c:1287: error: invalid opera
All,
I have run into a problem building 90rc2 on Solaris 10 x86.
The error is in clamav-milter/clamav-milter.c
If I define SESSION, I get the following:
clamav-milter.c: In function `main':
clamav-milter.c:1287: error: invalid operands to binary !=
clamav-milter.c: In function `clamfi_eom':
clamav
On Thu, 2006-11-02 at 17:50 +0100, Tomasz Kojm wrote:
> > > if(limits->maxfilesize && ((unsigned int) zdirent.st_size >
> > > limits->maxfilesize)) { cli_dbgmsg("Zip: %s: Size exceeded (%d, max:
> > > %ld)\n", zdirent.d_name, zdirent.st_size, limits->maxfilesize); /* ret =
> > > CL_EMAX
Philip Allison wrote:
Any comments? What is the "official" verdict on what scanners should do
with the limits when ArchiveBlockMax is disabled, and what are the
scanners *actually* doing at the moment?
Regards,
Phil
The current config is clear enough. The limits are adjustable by you and
t
On Thu, 02 Nov 2006 16:10:29 +
Philip Allison <[EMAIL PROTECTED]> wrote:
> Looking at the code of scanners.c, it would appear that some of the limits
> are completely ignored when ArchiveBlockMax is not enabled, and so there is
> not actually any DoS protection in place.
Not true, see below.
Hullo!
I have noticed some disturbing behaviour in ClamAV (0.88.5 and earlier)
regarding the various archive scanning limits (ArchiveMaxFiles,
ArchiveMaxFileSize etc.). What I have noticed is that when
ArchiveBlockMax is not enabled, ClamD can take a very long time to
process files which are above
German C. Basisty wrote:
> Thank you very much! You're rigth!
>
> May I ask another cuestion?
>
> I manage a cross platform network, Linux for the servers, Windows xp for the
> workstations. At the servers, I use clamav 0.90rc2 (now :)) and clamwin
> 0.88.5 for the workstations. When I try to upd
Odhiambo Washington wrote:
> config.status: error: cannot find input file: libclamav/Makefile.in
Weird! The file's definitely there and wasn't touched in 8 days now...
-aCaB
___
http://lurker.clamav.net/list/clamav-users.html
Clamav wrote:
> Hello!
> I only want to report some warning messages during compilation on
Hi Clamav,
we are aware and we'll evenually clean them up.
Thanks for the report,
-aCaB
___
http://lurker.clamav.net/list/clamav-users.html
Clamav wrote:
Hi!
Thanks a lot - it was really a problem of the library path!!
Wolfgang
If this is true then crle should have been able to correct it. A problem
that is common when crle is not used to establish the library search
path is when the person building a product has a different li
Hi
Tuesday I've installed the ClamAV 0.90RC2 in to my mail-relay with exim4
and all works.
This morning I have found that on the server there were many processes
clamd, usually I've 3/4 processes.
At the first I've try to show the running processes on my server, I've
found about 15 processes of cl
Thanks for that, but i have noted that i was running two copies of
freshclam.
One was in /usr/bin/freshclam and the other latest new one was
in /usr/local/lib/freshclam and i had a cron job running to update using
the earlier version but i have since fixed that now.
On Thu, 2006-11-02 at 07:47 -0
Thanks - that did it!
Wolfgang
> -Ursprüngliche Nachricht-
> Von: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Im Auftrag von
> Nigel Horne
> Bereitgestellt: Donnerstag, 02. November 2006 12:10
> Bereitgestellt in: Clamav
> Unterhaltung: [Clamav-users] Milter problem on Fresh Solaris 1
On Thu, 2006-11-02 at 12:07 +0100, Clamav wrote:
> Hello!
> I try to run sendmail with clamav-milter with the recommended user
> clamav. If I run everything as use root - there is no problem. If I
> change to user clamav I get first in the logfile:
> -LibClamAV Error: Can't open/create /var/run/clm
Hello!
I try to run sendmail with clamav-milter with the recommended user
clamav. If I run everything as use root - there is no problem. If I
change to user clamav I get first in the logfile:
-LibClamAV Error: Can't open/create /var/run/clmilter.sock
/tmp/clamav-ff091e4518d14f2e5663f334e2208283: In
Try 0.90rc2 :) It Works
Regards
German Basisty
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Roger
Enviado el: jueves, 02 de noviembre de 2006 4:13
Para: ClamAV users ML
Asunto: [Clamav-users] Updating ClamAV
Hello All.
I have updated my clamav and fol
Hello!
I only want to report some warning messages during compilation on
Solairs 10 with gcc 3.4.3!
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I./mspack -I./unrar
-I/usr/include -I/usr/local/include -g -O2 -MT scanners.lo -MD -MP -MF
.deps/scanners.Tpo -c scanners.c -fPIC -DPIC -o .libs/scanners.lo
s
OS: FreeBSD 4.11
Compilation: "by hand as always"
Code: CVS as of 200611021120
Problem: `configure` fails - see snippet below
checking resolv.h usability... no
checking resolv.h presence... yes
configure: WARNING: resolv.h: present but cannot be compiled
configure: WARNING: resolv.h: check
35 matches
Mail list logo
