Den 2012-06-24 16:41, Dennis Peterson skrev:
On 6/24/12 7:37 AM, David Alix wrote:
which version of clamd are you running?
9.7.2, 9.7.4, and 9.7.5.
all at once to be sure ?
___
Help us build a comprehensive ClamAV guide: visit
On 6/25/12 12:41 AM, Benny Pedersen wrote:
Den 2012-06-24 16:41, Dennis Peterson skrev:
On 6/24/12 7:37 AM, David Alix wrote:
which version of clamd are you running?
9.7.2, 9.7.4, and 9.7.5.
all at once to be sure ?
No - I have several systems around the world running ClamAV, each running
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 24/06/2012 00:14, David Alix wrote:
Hello- Since Thursday morning, sometime between the daily.cld
15065 and 15066 update, my clamd daemon has been abending regularly
(every couple of minutes to every half hour). I am running clamd
0.97.2 on
On 6/23/12 9:14 PM, David Alix wrote:
Hello-
Since Thursday morning, sometime between the daily.cld 15065 and 15066 update,
my clamd daemon has been abending regularly (every couple of minutes to every
half hour). I am running clamd 0.97.2 on Solaris SPARC.
I haven't seen mention of this from
which version of clamd are you running?
Thanks
David
Quoting Dennis Peterson denni...@inetnw.com:
On 6/23/12 9:14 PM, David Alix wrote:
Hello-
Since Thursday morning, sometime between the daily.cld 15065 and
15066 update,
my clamd daemon has been abending regularly (every couple of
On 6/24/12 7:37 AM, David Alix wrote:
which version of clamd are you running?
Thanks
David
9.7.2, 9.7.4, and 9.7.5.
dp
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml
Hello-
Since Thursday morning, sometime between the daily.cld 15065 and 15066
update, my clamd daemon has been abending regularly (every couple of
minutes to every half hour). I am running clamd 0.97.2 on Solaris SPARC.
I haven't seen mention of this from anyone else on the list, so I
Hi there -
I completed an upgrade of ClamAV to version 0.92 by following the appropriate
procedure on the website.
When I tried to start either clamd or freshclam, the error message shown below
appears:
error while loading shared libraries: libclamav.so.3: cannot open shared object
file:
To: ClamAV users ML
Subject: Re: [Clamav-users] Problem Starting clamd after upgrade to 0.92
Kaplan, Andrew H. wrote:
Hi there -
I completed an upgrade of ClamAV to version 0.92 by following the appropriate
procedure on the website.
When I tried to start either clamd or freshclam
Which CentOS? 4 or 5? And did you build it yourself or did you use an
RPM? If an RPM, which one? Is SELinux enabled?
On 7/26/07, Graziano [EMAIL PROTECTED] wrote:
Hello!
I installed clamd on a Centos web server linux machine . When I start
the demon
#clamd
cpu goes to 80-90% and
Clamd only seems to spiral out of control while running on SMP-enabled
machines. We've been able to toggle between stable and awful behavior
by turning SMP support on and off in the kernel.
___
http://lurker.clamav.net/list/clamav-users.html
On Tuesday 15 Feb 2005 11:19, abac wrote:
hi,
I installed the clamav-0.82.tar.gz and the webmin module for clamav,the
installation was successful,but now when i want to open the clamav in
webmin this is theerror:
WARNING: Please fill in the location of the clamav daemon startup file
in the
hi,
I installed the clamav-0.82.tar.gz and the webmin module for clamav,the
installation was successful,but now when i want to open the clamav in
webmin this is theerror:
WARNING: Please fill in the location of the clamav daemon startup file
in the module's configuration (install the clamav
On Tue, 15 Feb 2005, abac wrote:
ERROR: Please edit the example config file /etc/freshclam.conf.
ERROR: Please edit the example config file /etc/clamd.conf.
ERROR: Can't parse the config file /etc/clamd.conf
Read what it says.
Do what it says.
Damian Menscher
--
-=#| Physics Grad Student SysAdmin
and run the update to 0.83 .. :)
http://www.clamav.net/doc/0.83/clamdoc.pdf
-Original Message-
From: Damian Menscher [mailto:[EMAIL PROTECTED]
Sent: Tuesday, February 15, 2005 4:05 PM
To: ClamAV users ML
Subject: Re: [Clamav-users] problem starting clamd
On Tue, 15 Feb 2005, abac
hi,
I installed the clamav-0.82.tar.gz and the webmin module for clamav,the
installation was successful,but now when i want to open the clamav in
webmin this is theerror:
WARNING: Please fill in the location of the clamav daemon startup file
in the module's configuration (install the clamav
On Tue, 2005-02-15 at 16:19 +0500, abac wrote:
hi,
I installed the clamav-0.82.tar.gz and the webmin module for clamav,the
installation was successful,but now when i want to open the clamav in
webmin this is theerror:
WARNING: Please fill in the location of the clamav daemon startup file
hi,
I installed the clamav-0.82.tar.gz and the webmin module for clamav,the
installation was successful,but now when i want to open the clamav in
webmin this is the error:
WARNING: Please fill in the location of the clamav daemon startup file
in the module's configuration (install the clamav
On Tue, 15 Feb 2005 17:01:44 +0500
shams [EMAIL PROTECTED] wrote:
hi,
I installed the clamav-0.82.tar.gz and the webmin module for
clamav,the installation was successful,but now when i want to open
the clamav in webmin this is the error:
WARNING: Please fill in the location of the clamav
On Tue, 15 Feb 2005, Tomasz Kojm wrote:
On Tue, 15 Feb 2005 17:01:44 +0500 shams [EMAIL PROTECTED] wrote:
ERROR: Please edit the example config file /etc/freshclam.conf.
ERROR: Please edit the example config file /etc/clamd.conf.
ERROR: Can't parse the config file /etc/clamd.conf
You have been
Tomasz Kojm [EMAIL PROTECTED]
Date: Tue, 25 Jan 2005 18:09:59 +0100
Subject: Re: [Clamav-users] Problem with clamd hanging
On Tue, 25 Jan 2005 17:48:08 +0100
[EMAIL PROTECTED] wrote:
Trog [EMAIL PROTECTED]
Thats normal behaviour. A gdb backtrace of each thread when it is
hanging
On Thu, 27 Jan 2005 09:51:48 +0100 in
[EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
After 24hours with 0.81rc1 compiled with gcc I have not seen any
hang-up.
And 0.81 is now released officially.
--
Brian Morrison
bdm at fenrir dot org dot uk
GnuPG key ID DE32E5C5 -
Tomasz Kojm [EMAIL PROTECTED]
Date: Tue, 25 Jan 2005 18:09:59 +0100
Subject: Re: [Clamav-users] Problem with clamd hanging
--===1361425311==
Content-Type: multipart/signed; protocol=application/pgp-signature;
micalg=pgp-sha1;
boundary=Signature=_Tue__25_Jan_2005_18_09_59_
- Original Message -
From: Tomasz Kojm [EMAIL PROTECTED]
To: ClamAV users ML clamav-users@lists.clamav.net
Sent: Monday, January 24, 2005 4:31 PM
Subject: Re: [Clamav-users] Problem with clamd hanging
It's rather a SESSION related bug. See my yesterday's post on a
temporary
Shaun Bugler [EMAIL PROTECTED]
Date: Tue, 25 Jan 2005 10:26:07 +0200
Subject: Re: [Clamav-users] Problem with clamd hanging
It's rather a SESSION related bug. See my yesterday's post on a
temporary workaround for this problem.
This fix was related to clamav-milter right? We don't
On Tue, 2005-01-25 at 10:26 +0200, Shaun Bugler wrote:
Tried on 1 box that had the problem.
Compiled zlib 1.2.2-1 from source, with shared libraries.
This morning it happened again Is there anything else we can try or
check to try solve this?
thanks,
shaun bugler
attach gdb to the
On Tue, 25 Jan 2005 10:00:13 +0100
[EMAIL PROTECTED] wrote:
I have tried with 0.81rc1 + zlib 1.2.2 and still hang several times
this night.
We can't help you unless you provide some useful information
(backtraces, etc.).
--
oo. Tomasz Kojm [EMAIL PROTECTED]
Content-Transfer-Encoding: plain
- Original Message -
From: Trog [EMAIL PROTECTED]
To: ClamAV users ML clamav-users@lists.clamav.net
Sent: Tuesday, January 25, 2005 11:02 AM
Subject: Re: [Clamav-users] Problem with clamd hanging
Tried on 1 box that had the problem.
Compiled zlib
On Tuesday 25 Jan 2005 10:50, Shaun Bugler wrote:
[EMAIL PROTECTED] dd]# clamscan 1106645880.4304-0.mail1a.your-server.co.za
LibClamAV Warning: Unknown encoding type plain - report to [EMAIL PROTECTED]
1106645880.4304-0.mail1a.your-server.co.za: OK
I investigatd further and found the
On Tue, 2005-01-25 at 12:50 +0200, Shaun Bugler wrote:
and thats there it stopped. I did a clamscan and got:
[EMAIL PROTECTED] dd]# clamscan 1106645880.4304-0.mail1a.your-server.co.za
LibClamAV Warning: Unknown encoding type plain - report to [EMAIL PROTECTED]
On Tue, 2005-01-25 at 12:22 +0100, [EMAIL PROTECTED] wrote:
Btw I did a truss a few days ago on the hanging process and it was stopped in
an accept syscall.
Thats normal behaviour. A gdb backtrace of each thread when it is
hanging is the most helpful thing at the moment.
-trog
On Tue, 2005-01-25 at 12:50 +0200, Shaun Bugler wrote:
I saved the emails and retried scanning, it stalled again...
Did a strace:
shmat(4, 0x3, 0x3) = -1 ENOSYS (Function not
implemented)
fcntl(4, F_GETFL) = 0x2 (flags O_RDWR)
fstat(4,
- Original Message -
From: Trog [EMAIL PROTECTED]
To: ClamAV users ML clamav-users@lists.clamav.net
Sent: Tuesday, January 25, 2005 2:20 PM
Subject: Re: [Clamav-users] Problem with clamd hanging
MTA; software used to pass emails to clam; any patches you have applied
(to all, but primarily
Trog [EMAIL PROTECTED]
Date: Tue, 25 Jan 2005 11:27:01 GMT
Subject: Re: [Clamav-users] Problem with clamd hanging
On Tue, 2005-01-25 at 12:22 +0100, [EMAIL PROTECTED] wrote:
=20
Btw I did a truss a few days ago on the hanging process and it was stoppe=
d in an accept syscall.
=20
Thats
On Tue, 2005-01-25 at 16:08 +0100, [EMAIL PROTECTED] wrote:
I just checked, and the problem is that clamd no more hangs but disapear.
So it may crash.
The problem is that it does run with / as current dir but not as uid root.
So it can't core dumps.
I'm wondering what I can do...
You
On Tue, 25 Jan 2005 17:48:08 +0100
[EMAIL PROTECTED] wrote:
Trog [EMAIL PROTECTED]
Thats normal behaviour. A gdb backtrace of each thread when it is
hanging is the most helpful thing at the moment.
Ok, so I did not use gdb as gdb core dump (maybe because I compiled
clamav with sun
Tomasz Kojm [EMAIL PROTECTED]
Date: Tue, 25 Jan 2005 11:46:21 +0100
Subject: Re: [Clamav-users] Problem with clamd hanging
--===0580729670==
Content-Type: multipart/signed; protocol=application/pgp-signature;
micalg=pgp-sha1;
boundary=Signature=_Tue__25_Jan_2005_11_46_21_
- Original Message -
From: [EMAIL PROTECTED]
To: ClamAV users ML clamav-users@lists.clamav.net
Sent: Monday, January 24, 2005 1:13 PM
Subject: Re: [Clamav-users] Problem with clamd hanging
Trog [EMAIL PROTECTED]
Date: Fri, 21 Jan 2005 16:27:51 GMT
Subject: Re: [Clamav-users
[EMAIL PROTECTED] wrote:
It was not crashing. But I did switch to 1.2.2 and it does not solve the
problem.
It hanged after 2 hours.
Btw it seems that it occurs on specific mails, as it seems to hang 2 or three
time in a row, than works for 2 hours or more...
I'll try to compile the 0.81rc1
I
On Mon, 24 Jan 2005 13:31:16 +0100
Kritof Petr [EMAIL PROTECTED] wrote:
I tested 0.81rc1 with zlib 1.2.2.2 on linux and clamd stops respond
after several hours/days to clients (clamav-milter, clamdscan)
requests. There must be STREAM related problem, I think.
It's rather a SESSION related
- Original Message -
From: Tomasz Kojm [EMAIL PROTECTED]
To: ClamAV users ML clamav-users@lists.clamav.net
Sent: Monday, January 24, 2005 3:59 PM
Subject: Re: [Clamav-users] Problem with clamd hanging
It's rather a SESSION related bug. See my yesterday's post on a
temporary workaround
On Mon, 24 Jan 2005 16:24:16 +0200
Shaun Bugler [EMAIL PROTECTED] wrote:
It's rather a SESSION related bug. See my yesterday's post on a
temporary workaround for this problem.
This fix was related to clamav-milter right? We don't use it, don't
have the milter package
installed at all
Hello,
I'm running clamd (clamav 0.80) on a solaris 9 server in front of amavisd
2.2.1 with a local unix socket.
About 2 hours after we start clamd it stops accepting requests. The daemon is
running, there is non special message either in amavis log or clamd log.
It does not work either
On Fri, 2005-01-21 at 11:36 +0100, [EMAIL PROTECTED] wrote:
Hello,
I'm running clamd (clamav 0.80) on a solaris 9 server in front of amavisd
2.2.1 with a local unix socket.
About 2 hours after we start clamd it stops accepting requests. The daemon is
running, there is non special
Trog [EMAIL PROTECTED]
Date: Fri, 21 Jan 2005 16:16:51 GMT
Subject: Re: [Clamav-users] Problem with clamd hanging
On Fri, 2005-01-21 at 11:36 +0100, [EMAIL PROTECTED] wrote:
=20
Hello,
=20
I'm running clamd (clamav 0.80) on a solaris 9 server in front of amavisd=
=20
2.2.1 with a local
On Fri, 2005-01-21 at 17:24 +0100, Frederic Goudal wrote:
I'm using 1.2.1 I'll try 1.2.2 monday, than the 0.81 if it does not work.
I would definitely do that. 1.2.1 has a known crashing bug.
-trog
signature.asc
Description: This is a digitally signed message part
I have been running clamav 0.80 on solaris with local unix socket since
October. Clamd stops accepting requests for me as well, but it's sporadic
unlike yours. It usually runs 1 to 3 weeks at a time without a problem. I
have a cron check and restart if it's doesn't respond.
On Thu, 2005-01-20 at 07:13, Odhiambo Washington wrote:
I am having a strange problem with clamd. It has become the biggest
bottleneck on my SMTP service but I just can't figure out why.
Perhaps this is not a clamd problem but a hardware problem!
I have tested both clamav-0.80 and
On Thu, 2005-01-20 at 10:22, Odhiambo Washington wrote:
* Trog [EMAIL PROTECTED] [20050120 13:00]: wrote:
On Thu, 2005-01-20 at 07:13, Odhiambo Washington wrote:
I am having a strange problem with clamd. It has become the biggest
bottleneck on my SMTP service but I just can't figure out
* Trog [EMAIL PROTECTED] [20050120 13:30]: wrote:
On Thu, 2005-01-20 at 10:22, Odhiambo Washington wrote:
* Trog [EMAIL PROTECTED] [20050120 13:00]: wrote:
On Thu, 2005-01-20 at 07:13, Odhiambo Washington wrote:
I am having a strange problem with clamd. It has become the biggest
On Thu, 2005-01-20 at 10:33, Odhiambo Washington wrote:
Sounds like you've built clam with debug enabled. You definitely don't
want to do that for a production system.
Not quite! Though I was running with Debug enabled in clamd.conf. Is
that what you meant?
You don't
* Trog [EMAIL PROTECTED] [20050120 13:37]: wrote:
On Thu, 2005-01-20 at 10:33, Odhiambo Washington wrote:
Sounds like you've built clam with debug enabled. You definitely don't
want to do that for a production system.
Not quite! Though I was running with Debug enabled
On Thu, 2005-01-20 at 10:47, Odhiambo Washington wrote:
Thanks for that. Looks like that is what was causing my problems with
clamd!! I will monitor to see the behaviour. I am running CVS code of
today
Are there other tune-ups that can be applied to clamd on a very busy
server?
As usual,
Le jeudi 20 Janvier 2005 11:47, Odhiambo Washington a écrit :
Are there other tune-ups that can be applied to clamd on a very busy
server?
You can compile clamav with specific optimizations for your CPU using gcc
options (see -march, -O, -mfpmath -msse -mmmx -m3dnow etc...)
By this way, you
* Trog [EMAIL PROTECTED] [20050120 14:01]: wrote:
On Thu, 2005-01-20 at 10:47, Odhiambo Washington wrote:
Thanks for that. Looks like that is what was causing my problems with
clamd!! I will monitor to see the behaviour. I am running CVS code of
today
Are there other tune-ups that can
I am having a strange problem with clamd. It has become the biggest
bottleneck on my SMTP service but I just can't figure out why.
Perhaps this is not a clamd problem but a hardware problem!
I have tested both clamav-0.80 and clamav-devel-20050120 today.
On my diagnostics, the mail processing
Using clamd devel-20040304 on FreeBSD 4.9
On several occasions now we've noticed that when clamd checks and reloads
the virus database current clamdscan's hang and then time out.
This causes some real problems on a process that uses clamdscan as it thinks
clamd is dead and then just bombs out.
I am having trouble starting clamd on a debian box and was hoping
someone could help. The basic error I am getting is ...
connect(): No such file or directory
ERROR: Can't connect to clamd.
--- SCAN SUMMARY ---
Infected files: 0
Time: 0.007 sec (0 m 0 s)
The problem seems to be
I am having trouble starting clamd ...
connect(): No such file or directory
ERROR: Can't connect to clamd.
--- SCAN SUMMARY ---
Infected files: 0
Time: 0.007 sec (0 m 0 s)
This looks like an error from clamdscan, not clamd. What's the full command
line you are using that
I am starting it with clamd, nothing more, nothing less!
I also get the same if I run clamdscan.
does that help diagnosis?
I am having trouble starting clamd ...
connect(): No such file or directory
ERROR: Can't connect to clamd.
--- SCAN SUMMARY ---
Infected files: 0
* Nigel Horne [EMAIL PROTECTED] [20030618 10:47]: wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Did I read that --enable-bigstack is only meant for BSD systems because
of the mbox code???
No. --enable-bigstack is needed for all uses of clamav on FreeBSD.
Thanks. I am going to
Dear all,
I tested the latest snapshot on my debian box,
but it don't work too( like the snapshot before)
Here are my versions:
Clamav-milter :
Clamd :
Clamav-milter works fine
Clamd after about a day of using became DEFUNCT
like this:
clamav 31425 0.0 2.4 Jun17 0:00
I compiled all with this option:
./configure --enable-milter --disable-bzip2 --disable-urandom
--enable-id-check --disable-clamuko --enable-debug --enable-bigstack
Did I read that --enable-bigstack is only meant for BSD systems because
of the mbox code???
I tried many compilation option,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Did I read that --enable-bigstack is only meant for BSD systems because
of the mbox code???
No. --enable-bigstack is needed for all uses of clamav on FreeBSD.
- -Nigel
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.1 (GNU/Linux)
Does anybody have any ideas?
Wouter
-Oorspronkelijk bericht-
Van: Wouter de Vries [mailto:[EMAIL PROTECTED]
Verzonden: maandag 28 april 2003 11:24
Aan: [EMAIL PROTECTED]
Onderwerp: RE: [clamav-users] Problem with clamd
Hello all,
After that, nothing happens.. I've looked up
Hello all,
After that, nothing happens.. I've looked up the clamd log files, but it
doesn't mention anything about e-mails getting scanned :( . I don't see
any errors either.
Does PS say if it's running? Does your version include the stack size fix
for BSD?
Wouter de Vries
-Nigel
Hello,
I installed ClamAV-0.54 today, copied the /usr/local/etc/clamav.conf-dist
file to /usr/local/etc/clamav.conf, but when I execute clamd, it returns
me an error.
# clamd
ERROR: Please edit the example config file /usr/local/etc/clamav.conf.
ERROR: Can't parse the config file
67 matches
Mail list logo
