Stus-List Stus list Velcro

I use WD40 to clean all sticky adhesive residues / old decals / oily stains. Amazing for road construction tar messes and racing tires marbles rubber stains on your race car and too. :-) -Francois Rivard 1990 34+ "Take Five" Lake Lanier, Georgia Sent from IBM Notes Traveler _

Re: Stus-List USB ports and users

I just got a USB fan for $10 from the dollar store. It works fine and is fairly quiet. Did I tell you it was only $10? Joe Della Barba j...@dellabarba.com Coquina C^C 35 MK I ___ This List is provided by the C&C Ph

Re: Stus-List USB ports and users

I have a USB fan running non-stop for the last 2 years (cooling the PVR and some network equipment in a enclosed cabinet), so they are reasonably reliable. Keep in mind though that you should be better off with a 12 V fan, as there won’t be any need to convert the voltage. Almost all computer fa

Re: Stus-List USB ports and users

You can buy 12-volt computer fans that you can wire directly into your system, too. I have one that blows air into the engine compartment. Jack Brennan Former C&C 25 Shanachie, 1974 Bristol 30 Tierra Verde, Fl. From: Dennis C. via CnC-List Sent: Wednesday, July 16, 2014 9:09 PM To: CnClist Subje

Re: Stus-List Genoa/Jib Sheet diameter on a 30-1, 7/16 or 1/2"?

The genoa sheets for my 38 are 7/16ths. I use a "fuzzy" double braid that I bought from Cajun Rope in Canada. Strength somewhere between StaSet and StaSetX, but a really soft hand that is nice on the hands. On my 25 I use 3/8ths line of the same material. 5/16ths line is just too small to be c

Re: Stus-List Maiden Viking Voyage!

Ahh Fair winds on your first trip my Viking Brethren!!! You have to join the Yahoo Viking group too. There are a couple of really smart guys there. One of which is a member of this list as well. I think you are the 3rd or fourth V 33/34 owner on this list. You are in for some fine sailing!!!

Re: Stus-List USB ports and users

Hi Each of these USB ports may have an always on 12v to 6v transformer inside which may setup a little always on draw. Anyone know? Has anyone tried a desperate 6 v battery to feed a bunch of bare non transformer ports, like those found on the front of computer desktop boxes? Don gett

Stus-List USB ports and users

I recently installed a Blue Sea 1016 dual usb port at my navstation for charging our cellphones. (The Admiral has an unlimited data plan and Pandora on her phone. We have a stereo that accepts MP3 aux so we use it a lot.) Anyway, I was wandering through a discount store and saw usb powered fans

Re: Stus-List binnacle light

Joel, My binnacle light is also wired to the Running Lights (not the ones on the mast) switch on the panel, just as Jake has described. But in addition, corrosion on the wires right in the binnacle itself had to be cleaned to get the lights (2 bulbs) to work. Eric Cat's Paw C&C 35 Mk II Mattap

Re: Stus-List Boat builder

That's interesting! I don't send out anything; just ask/answer questions with family and friends. Wonder how many other missives don't get through? Ron On Wed, 7/16/14, Burt Stratton wrote: Subject: RE: Stus-List Boat builder To: "'Ronald B. Frerke

Re: Stus-List Boat builder

Rob & Burt, Thanks for the info. Ron Wild Cheri STL ___ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/

Re: Stus-List Boat builder

My emails are bouncing from Ron's email address. Postmaster at yahoo has him in their spammer list. -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ronald B. Frerker via CnC-List Sent: Wednesday, July 16, 2014 2:16 PM To: cnc-list@cnc-list.com Subject:

Re: Stus-List velcro

Naphtha, I think like lighter fluid will be quicker. Bill Coleman C&C 39 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bev Parslow via CnC-List Sent: Wednesday, July 16, 2014 3:04 PM To: cnc-list@cnc-list.com Subject: Stus-List velcro Just taken some old velcro off

Re: Stus-List Boat builder

http://sailboatdata.com/view_builder.asp?builder_id=10 -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ronald B. Frerker via CnC-List Sent: Wednesday, July 16, 2014 2:16 PM To: cnc-list@cnc-list.com Subject: Stus-List Boat builder I have a '73 C&C30-1

Re: Stus-List Boat builder

Cuthbertson and Cassian. Built by C%C yachts I think http://sailboatdata.com/view_designer.asp?designer_id=113 Skip -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ronald B. Frerker via CnC-List Sent: Wednesday, July 16, 2014 2:16 PM To: cnc-list@cn

Re: Stus-List velcro

Bev, Suggest Goo Gone or Easy Off Oven Cleaner. All the best, Edd Edd M. Schillay Starship Enterprise C&C 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log On Jul 16, 2014, at 3:04 PM, Bev Parslow vi

Stus-List velcro

Just taken some old velcro off the clear perspex hatches. A residue has been left behind. What can I use to get them clean? Windex not working.___ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list pref

Re: Stus-List Boat builder

George Hinterhoeller in Niagara-on-the-Lake, ON. Sent from Samsung Mobile Original message From: "Ronald B. Frerker via CnC-List" Date: 07-16-2014 2:15 PM (GMT-05:00) To: cnc-list@cnc-list.com Subject: Stus-List Boat builder I have a '73 C&C30-1. Would Bruckmann have b

Stus-List Boat builder

I have a '73 C&C30-1. Would Bruckmann have been the builder, or ??? Ron Wild Cheri STL ___ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page

Stus-List 29-2 Cockpit floor rudder bushing

I seem to have some movement between the top of the rudder shaft and the large flange mounted on the cockpit floor. There is no movement of the flange on the cockpit floor. I am guessing that there is a plastic bushing located in this flange that is worn. Has anyone pulled the cap off the flange

Re: Stus-List Genoa/Jib Sheet diameter on a 30-1, 7/16 or 1/2"?

Except the hand... From my Android phone Original message From: "Dennis C. via CnC-List" Date: 07/16/2014 12:31 PM (GMT-05:00) To: Nate Flesness ,CnClist Subject: Re: Stus-List Genoa/Jib Sheet diameter on a 30-1, 7/16 or 1/2"? I use 3/8 VPC on my  35-1.  Dropped down

Re: Stus-List Genoa/Jib Sheet diameter on a 30-1, 7/16 or 1/2"?

I use 3/8 VPC on my 35-1. Dropped down from 7/16 StaSet. No reason to use 1/2 inch. Dennis C. Touche' 35-1 #83 Mandeville, LA On Wed, Jul 16, 2014 at 10:56 AM, Nate Flesness via CnC-List < cnc-list@cnc-list.com> wrote: > > > > Replacing the 135% furling genoa sheets on a 30-1 used only for c

Re: Stus-List Genoa/Jib Sheet diameter on a 30-1, 7/16 or 1/2"?

Nate, I have 7/16 on my 35. You could go to 3/8 without a problem. Joel On Wed, Jul 16, 2014 at 11:56 AM, Nate Flesness via CnC-List < cnc-list@cnc-list.com> wrote: > > > > Replacing the 135% furling genoa sheets on a 30-1 used only for cruising. > Have had 1/2". The admiral likes the solid r

Stus-List Genoa/Jib Sheet diameter on a 30-1, 7/16 or 1/2"?

Replacing the 135% furling genoa sheets on a 30-1 used only for cruising. Have had 1/2". The admiral likes the solid red and green colors available for Samson Trophy Braid but for some reason they only offer those color options up to 7/16". At 1/2" they switch to flecked white. Any experience with

Re: Stus-List bonding strap question

Ours is done the same way. "Our boat has one keel bolt washer w a big lug welded to it. It is under the nut on the foremost bolt under the mast step and a stranded wire connects the mast to this washer, so the keel is the ground for the mast." Ken H. C&C 37 XL Salazar 1990, Hull #67 Cape Breton

Re: Stus-List bonding strap question

The foredeck cow would approve. The idea of leather bothers her. Rich > On Jul 15, 2014, at 22:58, Chuck S wrote: > > Silk ties may be better? > > > > From: "CNC boat owners, cnc-list" > To: "Frederick G Street" , "CNC boat owners, cnc-list" > > Sent: Sunday, July 13, 2014 11:25:54 AM >