My vibrating saw (Mastercraft lithium) made quick work of the one thru hull
backing plate that was installed with 3M 5200 ... and the thru hull nuts that
had been painted over multiple times.
Peter Fell
Sidney, BC
Cygnet
CC 27 MkIII
From: cnc-list--- via CnC-List
Sent: Friday, July 11, 2014
Thankfully not mine.
http://www.kijiji.ca/v-sailboat/barrie/sailboat-as-is-where-is-all-is-lost/603720077?enableSearchNavigationFlag=true
Michael Brown
Windburn
CC 30-1
___
This List is provided by the CC Photo Album
Email address:
Umm seriously would anyone pay 4 grand for the privilege to fish this out of
the water ?
Tim
CC 33MKII
Torontohttp://www.timeanddate.com/worldclock/city.html?n=250
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Michael
Brown via CnC-List
Sent: Thursday, July 17, 2014 12:07
There is not much privacy when using the head
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tim Sippel
via CnC-List
Sent: Thursday, July 17, 2014 1:21 PM
To: Michael Brown; cnc-list@cnc-list.com
Subject: Re: Stus-List A real life All is Lost
Umm seriously would anyone
I do not know how a desperate 6 V battery would work, I never came across one.
;-) But USB is 5.0 V nominal, not 6 V and you likely damage things if you feed
it with more than 5.25 V.
Leslie
Phoenix, CC32
On Wed, 7/16/14, D Harben via CnC-List
Each of these USB ports may have an always on 12v to 6v transformer inside
which may setup a little always on draw. Anyone know?
Where I work we design and manufacture transformers, mostly for aerospace. I
am not an EE but have worked with them regarding transformer efficiency. We do
not
How do I get the top off?___
This List is provided by the CC Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Stick something long and skinny in the handle hole and push down as you pull up
on the winch body. If my 18s are the same this will work for you.
Brent D
27-5
Lake Winnipeg
Sent from my iPhone
On Jul 17, 2014, at 2:43 PM, Bev Parslow via CnC-List cnc-list@cnc-list.com
wrote:
How do I
I don't know how you get the line stripper off, but the winch body on the 18s
is confined by a spring clip in a groove on the spindle shaft. The clip is like
2 turns of a slinky. You have to pick out the top end with a small screwdriver
or a knife, and then work the rest of it off bit by bit
If there are 2 holes in the top use your gas key.
Joel
On Thursday, July 17, 2014, Brent Driedger via CnC-List
cnc-list@cnc-list.com wrote:
Stick something long and skinny in the handle hole and push down as you
pull up on the winch body. If my 18s are the same this will work for you.
Bev - there's info on the photoalbum site:
http://www.cncphotoalbum.com/winches/bar19_2sp.htm
Wal
___
This List is provided by the CC Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go
Crowbar. Use a pad so you don't damage the coaming.
Jim Watts
Paradigm Shift
CC 35 Mk III
Victoria, BC
On 17 July 2014 14:07, Wally Bryant via CnC-List cnc-list@cnc-list.com
wrote:
Bev - there's info on the photoalbum site:
http://www.cncphotoalbum.com/winches/bar19_2sp.htm
Wal
Hey Jim!
Shouldn't you be cruisin' right now?... inna this weather!
I have an excuse to be here, since I'm still working for a living.
Cheers, Russ
At 10:05 PM 17/07/2014, you wrote:
Crowbar. Use a pad so you don't damage the coaming.
Jim Watts
Paradigm Shift
CC 35 Mk III
Victoria,
13 matches
Mail list logo
