I've tried a search and am unable to find the manufacturer of the mast on my
1985 cnc 33 MKII, need to order new guides for the spin pole car as one is
broken, any ideas?
Thanx
Brad
C C 33 Pulse
Sent, miraculously through cyberspace,
from my iPad!
Brad, ours was made by CC. Contact Rob MacLachlan at South Shore Yachts for
parts.
His email: sa...@southshoreyachts.com
Website: http://southshoreyachts.com/
Paul Fountain
Managing Director
SeaSource Inc.
Bookkeeping IT Services.
-Original Message-
From: CnC-List
Rig-Rite / Holland Marine / South Shore Yachts
sam :-)
Original Message
From: Bradley Lumgair via CnC-List
Sent: Wednesday, May 13, 2015 4:57 AM
To: cnc-list@cnc-list.com
Reply To: cnc-list@cnc-list.com
Cc: Bradley Lumgair
Subject: Stus-List Mast on cc 33 MKII
I've tried a search and am
Oops. Correction by a boat buck. Sweet's gang replacement was $1200, not 200.
Of course, we don't get much of anything for a boat if $200 is all ya got.
Cheers, Russ
At 05:18 PM 12/05/2015, you wrote:
250 bucks for a swaged eye terminal??
Wow, glad I'm wire. Sweet's gang, sans
My mast is from Offshore Spar (as my boom, spin pole and vang). I think all CC
mast of those years were from them. Pierre Tremblay
Avalanche #54988
CC38-3 WK, hull #76
De : Paul Fountain via CnC-List cnc-list@cnc-list.com
À : cnc-list@cnc-list.com cnc-list@cnc-list.com
Cc : Paul Fountain
My 1986 mast is labeled, designed by CC, but manufactured by Cinkel,
which is long out of business.
Bill Bina
On 5/13/2015 6:57 AM, Bradley Lumgair via CnC-List wrote:
I've tried a search and am unable to find the manufacturer of the mast on my
1985 cnc 33 MKII, need to order new guides
Yanmar 3GM30F.
The weeping hole on the pump that distributes antifreeze throughout engine and
various systems is now leaking antifreeze. I believe Yanmar in their wisdom
calls this the Fresh Water pump although my mechanic calls it a coolant
distribution pump.
Anyone know who is best to
On the 33 mkII, mast were inhouse cc designed profiles from 1985 to 86. Then
Offshore Spar supplied the mast and boom for 1987-88 vintage. The Offshore is a
Very upgrade, one of the reason why i was specifically looking for an '87 33.
Bruno Lachance
Becassine
CC 33 mk II 1987
New Richmond, Qc.
Rob was by yesterday, bless him for coming out at 7:00pm on short notice ..
then putting up with my rowing into the wind and chop. He's a good sport.
Did the dye test .. jury is out. He's going to Navtec with the pictures and
I should know by today. If I had more time I would replace it on
Engine: Yanmar 3GM30F
Have come across two part numbers at different costs.
1. 128695-42010 “Cooling Fresh Water Pump” . Generally selling for around
$270 USD
2. 121000-42100 “Fresh Water Pump Assembly”. Selling $176.95 CAD at boat
house
Is the second a component of the
I would file/grind/buff down the suspected crack to see what it is. At worst the
end is defective and you are sure. I doubt taking 1/64 or less off will make a
cracked part any worse. At best after you buff it out there is no crack and the
die does not show up you should be good.
From your
Try Shining Waters Marine in Tantallon, they are a Yanmar retailer.___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
Try here:
http://www.marinedieseldirect.com/catalogs/catalog_group.php?owner=mddpage_ident=Y00F5062-34model=3GM30Fmanufacturer=Yanmartitle=COOLING%20FRESH%20WATER%20PUMPquant_position=4catalog=Y00F5062printparts=printservice=printoperators=comment1=
The answer is always the more expensive one!
Holland marine got back to me, they have the guides in stock for $16 each,
thank you all, you collectively are an invaluable resource!
Sent, miraculously through cyberspace,
from my iPad!
___
Email address:
CnC-List@cnc-list.com
To change your list
.25 rod diameter x 200 = 50 inches or 4' 2 diameter circle. When I had my
headstay done, I made an X using 1 x 4, and made the coil about 5 ft around.
Fit easily on the roof racks of my car, and I drove the 2 1/2 hrs to the rigger
to save time and talk about options and give him a check to
At that price I'd buy a spate set...or 2.
On May 13, 2015 5:27 PM, Bradley Lumgair via CnC-List
cnc-list@cnc-list.com wrote:
Holland marine got back to me, they have the guides in stock for $16 each,
thank you all, you collectively are an invaluable resource!
Sent, miraculously through
No idea. Rigger is over an hour away. As it stands now he's asked me to
ship him the upper *and* lower so that he can ensure the new fitting fits
with the rest of the rig. 3' to 4' coils is what was recommended, which
sounds tight to me but he's the expert so I trust him. I'll be off to the
boat
Steve
Can you not put it up and rig a halyard to the toerail on the affected side?
Then when new rod comes you could go up in a bosuns chair to attach it.
Might be a bit tricky around the spreader end but I cannot see why it could not
be done if you didn’t want to incur more launch costs with
Maybe I'm a fool for suggesting this but any reason you can't replace that
rod with the mast up?
On May 13, 2015 11:21 AM, Stevan Plavsa via CnC-List
cnc-list@cnc-list.com wrote:
The word from Navtec is replace, which doesn't surprise me. I don't see
that they have much incentive to tell me to
There's a good chance the guide has nothing to do with the rig. Look at
the harken, schaffer and ronstan websites and see if any of the hardware
looks familiar. Schaffer was a popular choice of CC during that time.
And just because it was one thing doesn't mean you can't use a different
It's a tell tale weep hole. Any rebuild shop can fix it. You can probably
replace the seals yourself or you can replace the pump easily enough.
They call it fresh water because its not saltwater or raw water. Big
picture, it's not the one with a rubber impeller.
Josh Muckley
S/V Sea Hawk
1989
You can measure the track and take a picture and send it to Bacon's to see
if they have one (or I could swing by there Saturday).
Joel
On Wed, May 13, 2015 at 11:53 AM, Josh Muckley via CnC-List
cnc-list@cnc-list.com wrote:
There's a good chance the guide has nothing to do with the rig. Look
Thanks Rich
Spoke with Peter this morning and he instructed me to try Rosborough. I have
contacted them but they will be not getting back to me until tomorrow.
Mike
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Knowles Rich
via CnC-List
Sent: Wednesday, May 13, 2015
Mike: Rosborough Boats is now the local parts and service outlet for Yanmar.
902-450-3262
Or ask Peter Drillio. He may have one in his basement or truck, or know where
to get one/how to repair yours.
Rich Knowles
Nanaimo, BC
INDIGO LF38
Almost sold in Halifax, NS.
On May 13, 2015, at
You could try calling Outer Harbour Marina.
Mike
Sent wirelessly from my BlackBerry device on the Bell network.
Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.
-Original Message-
From: Stevan Plavsa via CnC-List cnc-list@cnc-list.com
Sender: CnC-List
Hi Mike!
Were it mine I'd rebuild it first - my engine is raw water cooled and
started dripping, took a couple of seals and not a lot of work to get it
right.
For parts as has been noted Rosborough is the official marine dealer
currently. If you are around Burnside you could try Liftow,
you wrote:
ship... Project by all means. Always liked the LF38. Looking for a long term
project cruising boat for a few years from now. I know, don't say it.
I'll say it. Don't get me started. VBG
I wish I had saved a copy of my project list from 2001, when I bought
Stella Blue. It
Mike,
Just looked in my 2GM20 parts manual:
121000-42100 is a replacement water pump with impeller/bearings/gasket and
pulley flange that bolts into the thermostat casting as a module. THIS IS THE
ONE YOU WANT!
128695-42010 is as above, but also includes the thermostat casting that above
Hi,
I am considering an Indigo 3 blade propeller to be used in conjunction
with my Atomic 4 (present 2 blade). Just curious if anyone has used the
propeller, and if they have seen performance improvements.
Thank you for your time.
Tim
SV Sly Fox.
CC 29' MK1 (1976)
Hi ,
My 33MKii has a mast made by CC . The spin car rides on U shaped channels
about 5 long (the slides are internal to the mast) . I purchased
replacements from South shore yachts and cut them to size , relatively
inexpensive , but that was about 6 years ago .
Tim
CC 33MKII
Matico .
Navtec recommends coiling no less than 200 times diameter.
Dennis C.
Sent from my iPhone
On May 13, 2015, at 10:35 AM, Stevan Plavsa via CnC-List
cnc-list@cnc-list.com wrote:
No idea. Rigger is over an hour away. As it stands now he's asked me to ship
him the upper and lower so that he
The word from Navtec is replace, which doesn't surprise me. I don't see
that they have much incentive to tell me to sail with it as is, from both a
liability perspective as well as a sales perspective. Oh well, our short
sailing season just got shorter :(
it's going to be about two weeks before I
32 matches
Mail list logo
