We also have this same Gardena 4 way Manifold.
Ken H.
On 28 May 2015 at 12:45, Kevin Driscoll via CnC-List cnc-list@cnc-list.com
wrote:
I have the same Gardenia 4 way manifold with the same labels on my 89
30-2. Must have come from the factory that way?
On Thu, May 28, 2015 at 7:28 AM
I don't think it was ever valid. It was just ignored. Means the same
thing as a smiley face. :-)
Bill Bina
On 5/28/2015 8:41 PM, John Pennie via CnC-List wrote:
We had a + on our 34+ hin. What is invalid today may have been fine
in 1990.
John
Sent from my iPad
On May 28, 2015, at 8:21
Just to follow up on this for future reference, it turned out the hatch
foam I got from McMaster Carr (#6322K13) was in fact correct (or at least
close enough and seems to be working well).
Since I thought it was too squishy I ended up doing a second order and
getting EPDM o-ring cord stock
Think about it a moment. You set mast rake with the boat in the water. By
definition she is sitting on her lines and it doesn’t really matter if she is
trimmed stern high or stern low.
Gravity points straight down, so the plumb bob (weight on the end of the main
halyard) hangs straight down
Is Alcare a wax or cleaner?RonWild CheriCC 30-1STL
From: dwight veinot via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com cnc-list@cnc-list.com
Cc: dwight veinot dwight...@gmail.com
Sent: Sunday, May 10, 2015 6:10 PM
Subject: Re: Stus-List Ready to Splash
for Awlgripped
Persistence came with BG H1000 instruments. Wind, Speed and depth. They were
functioning.
However. The displays were losing what I call raster lines and were dim and
difficult to read at night unless looking straight on. I wished to purchase
newer displays. With BG the newer models are
I've installed BG on a couple boats and they seem to work fine.
I have Nexus (NX2) instruments on Touche' and love them. I like the easily
customized multidisplays.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Fri, May 29, 2015 at 8:56 AM, Patrick Davin via CnC-List
cnc-list@cnc-list.com
This thread is a couple months old, but I'm looking into new instruments
now too. Mainly a new speed display + transducer. Eventually adding a wind
instrument and maybe replacing the depth (old but still working).
Anyone have experience with BG? I was considering a Raymarine i70 but now
am
Hi, Patrick. I’ll admit my bias up front; I design and install marine
electrical and electronics systems, and have been a Raymarine-certified
installer.
Okay, that’s out of the way.
Raymarine in the past did have a bit of an issue with network versions; but now
that they’ve settled on
I'll second Fred's comments about the i70; it has worked well for us...Fred
was very helpful, ( and patient with all of my questions) in getting the system
up and running...
Richard
1985 CC 37 CB; Ohio River, Mile 584.4
Richard N. Bush
2950 Breckenridge Lane, Suite Nine
Louisville,
Thanks, Richard! And for those who don’t know it, Lloyd Lippe from the list
(and another lister for whom I’ve done design work and sold equipment) is
getting ready to take his Landfall 39 out to bluewater next week, with all his
new Raymarine toys aboard. He’s probably too busy getting
AwlCare is the polish. AwlWash is the cleaner. I use both. Nice products.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Fri, May 29, 2015 at 10:03 AM, Ronald B. Frerker via CnC-List
cnc-list@cnc-list.com wrote:
Is Alcare a wax or cleaner?
Ron
Wild Cheri
CC 30-1
STL
I used oak last time and didn't seal the ends as well as I thought I had.
Water intrusion was noticeable. What also happened was that the oak started
bending until finally it was too low for the rig to tighten well.I replaced
with a mexican hardwood, very oily, that they use for fenceposts
James — I emailed you off-list, but haven’t heard back; maybe I ended up in the
spam folder. I have a Yanmar panel that may work for you. Contact me off-list
if you’re interested in more info.
Fred Street -- Minneapolis
S/V Oceanis (1979 CC Landfall 38) -- Bayfield, WI
On May 26, 2015, at
And if needed to bring back the color Awlgrip recommends Finesse by 3M.
Awlwash before and after using Finesse. Then apply Awlcare.
David F. Risch
(401) 419-4650 (cell)
Date: Fri, 29 May 2015 10:12:10 -0700
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Ready to Splash
From:
Thanks Fred, that's helpful. Things are slowly becoming clearer to me. (and
I'm leaning a bit back towards Raymarine)
I called Ray tech support back today and they said they have a new guy
ramping up so that might be who I talked to yesterday. Mark (tech guy
today) said i70 will work fine
Good day.
I'm noticing year after year there is more and more play in my transom hung
rudder. The 27 MkV has some pretty heavy duty hardware which I believe we're
made by Schaefer. I'd like to replace them. My web search is leading me
nowhere useful. Has anyone replaced theirs and what did
I would try nylon bushings before replacing. Had them on my Rhodes 19. Jerry.
27mkv. JJ
Sent from my iPhone
On May 29, 2015, at 6:18 PM, Brent Driedger via CnC-List
cnc-list@cnc-list.com wrote:
Good day.
I'm noticing year after year there is more and more play in my transom hung
Hi Patrick, I have the ST70 control head (seatalk) for my autopilot,
predecessor to the I70, recently added a triducer for speed, depth, temp. No
additional boxes needed. Just plugged into the backbone. Away we went. I also
have my Standard Horizon chartplotter plugged into the NMEA
I have 2 BG Tritons on either side of the companion way and a Zeus 2 at
the helm.
They rock! I have had them for 2 seasons now, No issues. The Triton are
easily customizable, have cool stuff like wind shift / depth graphs over
time, nice wind rose, etc, etc.
The Zeus 2 is da bomb. it
Does it have the fancy microphone?
(reference to Blues Brothers movie)
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
Jean-Francois J Rivard via CnC-List
Sent: Friday, May 29, 2015 3:38 PM
To: cnc-list@cnc-list.com
Cc: Jean-Francois J Rivard; jda...@gmail.com
Subject:
21 matches
Mail list logo
