Re: Stus-List reefing lines

Jake is correct. I put covers where the lines hit the clutches. Joel On Tuesday, May 10, 2016, Jake Brodersen via CnC-List wrote: > Bill, > > > > I find that 3/8” works pretty well. It’s plenty strong. I think Joel > used 3/16” dynema, which is probably even stronger.

Re: Stus-List reefing lines

Bill, I find that 3/8” works pretty well. It’s plenty strong. I think Joel used 3/16” dynema, which is probably even stronger. It was also slippery enough that friction wasn’t much of an issue. Jake Jake Brodersen C 35 Mk-III “Midnight Mistress” Hampton VA From:

Re: Stus-List 37+ (or XL) Wiring Question

My transducers are under the aft edge of the berth in the forward cabin and can be seen by opening the doors under the berth or opening the lid over that storage area. They all seem to be a bit different. Perhaps Edd's is different because of his shallow keel? I also have a engine start battery

Re: Stus-List Selling The Office

JP, The boat formerly know as "The Office" will reside at the Nyack Boat Club where it will join another 35 MkIII, a 40 MkII, a 34/36+ (my boat), 2 30's (MkI and II) and a few 29s. If you find yourself venturing south, consider spending a day or night at Nyack. We have a few guest moorings with

Re: Stus-List reefing lines

Bill — I’m using 3/8” (Cajun XLE) on my Landfall 38. Maybe a bit overkill, but it works well. Fred Street -- Minneapolis S/V Oceanis (1979 C Landfall 38) -- on the hard in Bayfield, WI :^( > On May 10, 2016, at 5:55 PM, William Walker via CnC-List > wrote: > > What

Re: Stus-List reefing lines

What size reefing line are others using on 36 foot + or - boats Bill Walker Cnc 36 Evening Star Pentwater, Mi ___ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating.

Stus-List Foiling Cats

We've been having some awesome sailing weather lately.. Last weekend we had temps in the 80's and the wind was blowing 12-20 all weekend.. We thought we were 'Flying" hitting 8.5 - 8.8 knots on Take Five, watch what this kid is doing on his foiling cat:

Re: Stus-List Mast boot pic

Don Don Harben Viking 34 Life www.ncyc.ca > On May 10, 2016, at 11:02 AM, Dennis C. via CnC-List > wrote: > > Here's a couple pics of the grey self fusing tape used for Touche's mast boot. > > https://drive.google.com/open?id=0B_sb5TfIENvsaHF0RTBxZDFla1k > > Dennis

Re: Stus-List Selling The Office

Will do. Nyack is just south of Croton Point. We're just north. I'm sure we'll see her. Thx JP 914 494 3618 Sent from my iPhone > On May 7, 2016, at 9:15 PM, Joel Aronson via CnC-List > wrote: > > It will be in Nyack. Keep an eye out for her! > >> On Saturday, May 7,

Re: Stus-List coolant hoses to water heater 33-2

Probably. Sent from my iPhone > On May 10, 2016, at 3:53 PM, Dave Syer via CnC-List > wrote: > > Hi all, > > Anybody know the spec or a source for the orange-jacketed coolant hoses used > to feed engine coolant through the water tank's heat exchanger? Looks like >

Stus-List 37+ (or XL) Wiring Question

Wha? So your Depth and speed transducers are under the seat. I have a battery there with a small access hole to the thru hull for the forward sink. But, my transducers are under the forward end of the companionway floor right outside of the forward stateroom...weird. That said,

Re: Stus-List 37+ (or XL) Wiring Question

Ken, Thanks — So I can run the wire between the woodwork inside the cabinet and the hull. and eventually it will come down by the starboard water tank? All the best, Edd Edd M. Schillay Starship Enterprise C 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log

Stus-List coolant hoses to water heater 33-2

Hi all, Anybody know the spec or a source for the orange-jacketed coolant hoses used to feed engine coolant through the water tank's heat exchanger? Looks like I could use generic SAE 20R3 D-2 automotive type 5/8 heater hose, though it is much thinner overall than what is in the boat, and would

Re: Stus-List 37+ (or XL) Wiring Question

2nd try at a link for the photo: https://picasaweb.google.com/lh/photo/mZ7qxlvWyENlamczTaf3vtMTjNZETYmyPJy0liipFm0?feat=directlink On 10 May 2016 at 16:36, Ken Heaton wrote: > Yes Edd, there is enough room to fish a cable down directly from A to B. > > Ken H. > > Assuming

Re: Stus-List 37+ (or XL) Wiring Question

Yes Edd, there is enough room to fish a cable down directly from A to B. Ken H. Assuming the link works, this photo shows that area with the top off of the settee: https://picasaweb.google.com/116809426602189633010/6283145822675301809#6283145841788640386 On 10 May 2016 at 16:25, Edd Schillay

Re: Stus-List composting head

I put in a composting head last year.  Really like it.  I will admit it adds a bit of an extra challenge when having guests because you need to explain the process a little --- but not really that much different that a manual toilet that requires a

Stus-List Running wires in small spaces

I was trying to run a chartplotter cable (apparently the cable guys at Ray have never done an install) and was having trouble getting the fuse holder through the hole. A shot of McLube solved the problem - slid right through. Simple Green works too and is less expensive. It would probably work

Stus-List 37+ (or XL) Wiring Question

Listers with 37+’s or XLs, Please see this image: https://dl.dropboxusercontent.com/u/15162917/ENTERPRISE/entb-wiring.jpg Basically, I need to run a cable from point A (inside the cabinet) to point B (the access hatch

Stus-List Annapolis yard recommendations?

Oak Harbor Marina in Pasadena Md. is both closer and likely less expensive. I know lots of people who have used it. They specialize in restoration. Dan ___ This list is supported by the generous donations of our members. If you like what we do, please

Re: Stus-List Stay Shroud Tension

Awesome, thank you. From: "Dennis C. via CnC-List" To: CnClist , Cc: "Dennis C." Date: 05/10/2016 08:44 AM Subject:Re: Stus-List Stay Shroud Tension Sent by:"CnC-List"

Stus-List composting head

It may depend how much you use it and your regional climate. I know that many composting devotees praise the system however, 2 neighboring boats have one and both kinda wish they didn't. On one boat it's a live aboard couple, the PO (Whom installed the composting head because he had found

Re: Stus-List Soft thumping/banging when in gear at low-rpm?

Thank you Virus-free. www.avast.com <#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

Re: Stus-List composting head

We also had an Airhead on our 26. Loved it so much it moved with us to the Pearson 424. It has some idiosyncrasies (nothing major) but being able to live life without sewer plumbing in a boat is WELL worth it. From: Robert Boyer via CnC-List Sent: Tuesday, May 10, 2016 1:55 PM To:

Re: Stus-List composting head

I have an AirHead-brand composting toilet and it works great! We've had it for almost a year now. I have written two blog posts on it if you are interested. No odors whatsoever!!! Bob Bob Boyer S/V Rainy Days (1983 C Landfall 38 - Hull #230) Blog: dainyrays.blogspot.com Email:

Re: Stus-List Soft thumping/banging when in gear at low-rpm?

I used the auto supply stuff - “weapons-grade” is not so available up here in Canada! . I brushed a thin film of the compound (basically grit in grease) onto the mating surfaces, mated them, and rotated the cone back and forth.Did not do complete rotations only because Mr. Robinson told

Re: Stus-List composting head

There's a big named the Atlantic ocean... lol On May 10, 2016 1:16 PM, "Della Barba, Joe via CnC-List" < cnc-list@cnc-list.com> wrote: > Does anyone have a composting head? > > I am really thinking about this – the 35 MK I really has no room for much > of a holding tank. > > Joe > > Coquina > >

Stus-List composting head

Does anyone have a composting head? I am really thinking about this – the 35 MK I really has no room for much of a holding tank. Joe Coquina C 35 MK I with a small holding tank ___ This list is supported by the generous donations of our members. If you

Re: Stus-List Mast boot pic

Sorry, I don't have brand info. I bought it off eBay. Came in plain packaging with no info. Dennis C. On Tue, May 10, 2016 at 10:43 AM, Kevin Driscoll wrote: > The tape looks great Dennis. Do you happen to remember what brand you are > using and where you got it

Re: Stus-List Mast boot pic

The tape looks great Dennis. Do you happen to remember what brand you are using and where you got it from? I like the 2" idea better than the 5" for ease of wrapping / avoiding the running rigging. On Tue, May 10, 2016 at 8:03 AM Dennis C. via CnC-List < cnc-list@cnc-list.com> wrote: > Here's a

Re: Stus-List Annapolis yard recommendations?

My experiences with Atlantic Spars was not good. On Tuesday, May 10, 2016 10:27 AM, Joel Aronson via CnC-List wrote: Not very convenient, but Herrington Harbor North has excellent trades on site.  Atlantic Spars for rigging and rudders, Osprey for fiberglass. 

Stus-List Mast boot pic

Here's a couple pics of the grey self fusing tape used for Touche's mast boot. https://drive.google.com/open?id=0B_sb5TfIENvsaHF0RTBxZDFla1k Dennis C. Touche' 35-1 #83 Mandeville, LA ___ This list is supported by the generous donations of our members.

Re: Stus-List Annapolis yard recommendations?

No brothers split--it was a family issue though. Hartge Yacht Yard is across the peninsula from Hartge Yacht Harbor. Talk to Luke Frey at Hartge Yacht Yard. I have his phone number if you need it.. Bob Bob Boyer S/V Rainy Days (1983 C Landfall 38 - Hull #230) Blog: dainyrays.blogspot.com

Re: Stus-List Annapolis yard recommendations?

I highly recommend Hartge's Yacht Yard in Galesville. Bob Boyer S/V Rainy Days (1983 C Landfall 38 - Hull #230) Blog: dainyrays.blogspot.com Email: dainyr...@icloud.com Annapolis, MD (presently in Baltimore) > On May 10, 2016, at 10:17 AM, Brian Fry via CnC-List > wrote:

Re: Stus-List Annapolis yard recommendations?

Bob, Which one now that the brothers split? Joel On Tue, May 10, 2016 at 10:29 AM, Robert Boyer via CnC-List < cnc-list@cnc-list.com> wrote: > I highly recommend Hartge's Yacht Yard in Galesville. > > Bob Boyer > S/V Rainy Days (1983 C Landfall 38 - Hull #230) > Blog: dainyrays.blogspot.com >

Re: Stus-List Annapolis yard recommendations?

Not very convenient, but Herrington Harbor North has excellent trades on site. Atlantic Spars for rigging and rudders, Osprey for fiberglass. Plenty of mechanics as well. Jabins would be closer but more expensive. Whitehall Marina has a good reputation but I have not used them. Joel Annapolis

Re: Stus-List Binnacle website

Try clearing browser cache. Sometimes a redirect gets muddled in. I had that problem with Leevalley when the did mtc on their site, my browser always wanted to Goto their site temporarily down page instead of regular home page. If you can start by clearing browser history,If that doesn't

Stus-List Annapolis yard recommendations?

I am looking to have some fairly major work done to my 37/40 this summer. Rudder removal/ repair, rigging inspection replacement, keel stub inspection/repair, engine inspection/ rebuild, Awlgrip repair. Has anyone had work done on the Upper Chesapeake? I am located in Havre de Grace but willing to

Re: Stus-List Stay Shroud Tension

First, go here: http://www.cncphotoalbum.com/doityourself/rod_rig_tuning.htm If entering via the website home page, go to the DIY link on the left side bar and then find the Rod Rigging - Generic Tune link. The first few steps will instruct you on how to center the masthead and make sure the

Re: Stus-List Transducers protruding

Thanks James Wish I could figure out this board. I can't see my original thread. Picture was too large so I re-submitted smaller but it looks like I'm in the dog house. Too bad cause the crane is coming and I'm running out of time. Cheers JB On Sun, May 8, 2016 at 2:58 PM, James Nichols via

Re: Stus-List Soft thumping/banging when in gear at low-rpm?

Or this. Available at most any local auto parts store for a lot less cost. http://www.autozone.com/shop-and-garage-tools/valve-grinding-compound/permatex-valve-grinding-compound/526806_0_0/?checkfit=true Rick Brass Washington, NC From: CnC-List

Re: Stus-List Soft thumping/banging when in gear at low-rpm?

I'm curious about the lapping compound procedure you described. I just finished replacing the brake band that engages the reverse gear in my Paragon transmission. I got everything put back together perfectly, cut new gaskets, and adjusted both forward and reverse to what seemed logical. Runs

Re: Stus-List Soft thumping/banging when in gear at low-rpm?

Hi Dave, Is the lapping compound you used something like this? http://www.brownells.com/gunsmith-tools-supplies/metal-prep-coloring/abrasives/lapping-compounds/lapping-compounds-prod1137.aspx Regards, Brian 1980 Landfall 38 On Mon, May 9, 2016 at 9:24 PM, Dave via CnC-List

Re: Stus-List Stay Shroud Tension

Thank you Frank. From: Franklin Schenk via CnC-List To: "cnc-list@cnc-list.com" , Cc: Franklin Schenk Date: 05/09/2016 04:21 PM Subject:Re: Stus-List Stay Shroud Tension Sent by:"CnC-List"

Re: Stus-List Binnacle website

Maybe the Admiral blocked them on your computer? Rick Taillieu Nemesis '75 C 25 #371 Shearwater Yacht Club Halifax, NS. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Peter Fell via CnC-List Sent: May-10-16 00:28 To: cnc-list@cnc-list.com Cc: Peter Fell