Re: Stus-List Mast boot

Not sure if this has been answered, but I just measured mine at 21" JeffFull Deck, Victoria Date: Thu, 12 May 2016 14:38:38 -0400 To: cnc-list@cnc-list.com Subject: Re: Stus-List Mast boot From: cnc-list@cnc-list.com CC: stevanpla...@gmail.com Anyone know off-hand the circumference of a C 32

Re: Stus-List Topping Lift wire size ?

Ahmet, My owner’s manual says it’s 3/32” 1x19 Stainless Steel cable, 27’ 6” long with 5’ of 1/8” yacht braid spliced to the lower thimble thimble. Rick Taillieu Nemesis '75 C 25 #371 Shearwater Yacht Club Halifax, NS. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On

Re: Stus-List Topside thru hull type

Love the Name on the side of your boat. Great job! From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Thursday, May 12, 2016 5:30 PM To: CnClist Cc: Dennis C. Subject: Stus-List Topside thru hull type Listers, Consider chrome when installing or

Re: Stus-List Through hole location for bilge outputs

Donald, many would argue that a one-way valve is not a good idea in a bilge pump. I can’t speak from my own experience, but many (wise) people talk about the one-way valves clogging and severely restricting the flow. If you want to prevent the water flowing back from the big pump, you can use

Re: Stus-List Lifeline netting

I had the same idea about putting netting on with zip ties. zip ties (even black ones) are quite UV sensitive, and fall off in about a year. It was pretty ugly there for awhile. Nate On Thu, May 12, 2016 at 5:36 PM, Ryan Doyle via CnC-List < cnc-list@cnc-list.com> wrote: > Cool. Thanks Jim.

Re: Stus-List Topside thru hull type

Mine are all stainless steel which is even better than chrome!!! Bob Bob Boyer S/V Rainy Days (1983 C Landfall 38 - Hull #230) Blog: dainyrays.blogspot.com Email: dainyr...@icloud.com Annapolis, MD (presently in Baltimore) > On May 12, 2016, at 4:29 PM, Dennis C. via CnC-List

Re: Stus-List Lifeline netting

still working on ideas for the gates jim -Original Message- From: Ryan Doyle To: detroito91 Cc: cnc-list ; dainyrays Sent: Thu, May 12, 2016 6:36 pm Subject: Re: Stus-List Lifeline netting

Re: Stus-List Through hole location for bilge outputs

Gene, I was actually going to do the same thing on my boat.Just recently purchased a boat and had a bilge pump but was not automatic. I actually hooked the current smaller pump that fits into the small well and did install a float valve but had to attached it slightly higher that the pump

Re: Stus-List Through hole location for bilge outputs

Hi Gene On Beemer my electric bilge with float switch uses one inch hose that is routed directly aft then up and exits just aft of the starboard bulkhead in cockpit locker two inches below the rub rail. Bob Caughran Beemer, 29MKII, 309 Sent from my iPhone > On May 12, 2016, at 12:14 PM,

Re: Stus-List Lifeline netting

I had issued with the getting the net set so it wasn’t baggy, so I just made my own by weaving nylon line from the lifelines to the toe rail. Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Petar Horvatic via CnC-List Sent: Friday, May 13, 2016 8:37 AM To:

Re: Stus-List Lifeline netting

That stuff is exposed to the elements. Ive had netting since 2006. I bought the first one from Holland marine. Few years in the tropics deteriorated it pretty good. I am now on my second set. This time from defender. I would say if you try the cheap route you are going to be redoing it

Re: Stus-List Topside thru hull type

I used polished SS for my holding tank vents. They look very much like the vents on Touche. I guess it is something I'll have to keep an eye on. However, the small vent I removed was not unusually corroded. Danny On 5/12/2016 8:52 PM, Jake Brodersen via CnC-List wrote: Dennis, Chrome