Re: Stus-List Mugs

How much was shipping I’m interested Richard Sent from my iPad Pro \ | / (@ @) —o00--(_)--00o— 416-805-3020 cell ..._/)..._/)..._/)..._/)..._/) I'd rather be sailing This e-mail and any files attached may be privileged and /or confidential and intended solely for

Re: Stus-List 35-3 Upper (inner?) Genoa Track

That is normally under dodger so will not use unless I take that off for racing but would need to see what we are speaking of as I have never used a 2nd track either ? So just attach a second line and trim hard without backwinding the main right ? Thanks all John C s/v halcyon

Re: Stus-List [EXTERNAL] Mugs

Hey Rob, Rob Ball and I would love to buy however many cups you have left (including the plate frame for me!) Let me know off line and I can do PayPal or however you want the dough. Cheers! Chuck Gilchrest Half Magic 1983 35LF Padanaram MA Sent from my iPhone > On Dec 12, 2018, at 2:08 PM, T

Re: Stus-List [EXTERNAL] Mugs

I would be interested in two of them. Shipping to 04491 how can i pay. Get Outlook for Android From: CnC-List on behalf of Della Barba, Joe via CnC-List Sent: Wednesday, December 12, 2018 3:05:43 PM To: 'cnc-list@cnc-list.com' Cc: Della

Re: Stus-List [EXTERNAL] Mugs

Sure – how much to 21666? Joe Della Barba DCSI 410-966-7255 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert Gallagher via CnC-List Sent: Wednesday, December 12, 2018 1:43 PM To: cnc-list@cnc-list.com Cc: Robert Gallagher Subject: [EXTERNAL] Stus-List Mugs I have

Re: Stus-List 35-3 Upper (inner?) Genoa Track

Luke - I use the inner track for my light #1. it's a bit of a nuisance since the car is not easily adjustable like the primary jib cars. I still like it and believe it gives us a little more point. to change jib cars to the primary track, either for the same sail or a headsail change, just

Stus-List Mugs

I have 10 new old stock original C coffee mugs and a license plate frame boxed up and ready to be shipped. They had been going to a list member in Canada but shipping proved to be too expensive. Any interest? Rob ___ Thanks everyone for supporting

Stus-List 35-3 Upper (inner?) Genoa Track

Hello All, I recently purchased a new to me 35-3 and an very excited for the coming spring and am grateful to this board. I did have a question about the 'upper' genoa tracks on the 35-3 that are about 2' long and mounted on the cockpit coamings just aft of the cabin. I assume that these are for

Re: Stus-List 37+, Removing adjustable jib sheet tracks

Josh, Had the same problem on my C Mk2 with a slight leak on a jib track.  We pulled the bolts fore and aft of where the water was coming thru on the headliner and forced silicon sealer into each bolt from topside by holding a wood peg against the reinforcement bar. (a C has a bar under the

Re: Stus-List 37+, Removing adjustable jib sheet tracks

The headliner that needs cut is literally inside cabinets. I'm not churchin' those up. The single hole outside of a cabinet will benefit from the freshly spared hole plugs which had been in use in the cabinets. Josh On Wed, Dec 12, 2018, 8:27 AM Dennis C. via CnC-List wrote: > Josh, > > What

Re: Stus-List 37+, Removing adjustable jib sheet tracks

Josh, What Bill says. Touche' has lots of those. See: https://drive.google.com/open?id=1ep3_LqsCzqnnNYUtU6OPFDGGeMoeA3jo Dennis C. Touche' 35-1 #83 Mandeville, LA On Wed, Dec 12, 2018 at 6:59 AM William Walker via CnC-List < cnc-list@cnc-list.com> wrote: > Josh, >For the places you need

Re: Stus-List 37+, Removing adjustable jib sheet tracks

Josh,   For the places you need to cut headliner you might consider going to Ace hardware or a big box store and looking at their selection of plastic hole plugs first.  If you can measure carefully you may be able to use a properly sized hole saw to gain access to nuts on bottom side of deck

Re: Stus-List 37+, Removing adjustable jib sheet tracks

I considered Captain Tolley's but decided to leave that route for leaks that could legitimately be called "inaccessible". For these tracks it was a short cut that I didn't want to take. I'll keep you posted. Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Wed, Dec 12, 2018, 7:18 AM

Re: Stus-List 37+, Removing adjustable jib sheet tracks

Hi Josh,  While I can't say I've wrestled with the track bolts, it is goddess to know about.  How about Captain Tolley's Creating Crack Cure?  It might well be worth a try... Please let us know the outcome. Kindest Regards,  Bruce Whitmore  Sent from Samsung tablet. Original

Re: Stus-List [EXTERNAL] Re: Westerbeke W33 Advice

YMMV for sure. I can have my engine out in just under an hour working by myself and faster with help. I am on my third engine and did every bit of the swaps myself, so it seems routine. Some boats have challenging access, but for me I use the main halyard and out she comes. Joe Della Barba