Stus-List NMEA 0183 vs. 2000 Wiring Compatibility

Bill, As others have said, the 0183 wire is likely to support the signal cables but not to not support the power requirements of downstream devices, however there are work arounds. Often when you are replacing 0183 devices with newer N2K devices, the older devices already had power run to them.

Re: Stus-List Need to replace forward hatch on 35 mkIII

or you can try their website: https://www.atkinshoyle.com/ On Sun, Apr 26, 2020 at 9:27 PM Graham Collins via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Matthew > > Atkins & Hoyle make the direct replacement, but there is an alternative - > I put on a low profile stainless hatch from these

Re: Stus-List NMEA 0183 vs. 2000 Wiring Compatibility

I think the spec on the power is similar to USB. It should be limited to about 500 milli amps. I guess I could check the power tee portion for a rating. The other question I would ask you Bill is, did you check a section of cable that is supposed to be used for backbone? Josh On Sun, Apr 26,

Re: Stus-List NMEA 0183 vs. 2000 Wiring Compatibility

That is an interesting point, I forgot about the power carrying capabilities of two of the wires. Got me curious so I pulled out a N2K connector to one of my components, the CPU. And it's not exactly what I thought I would find. The actual wires appear to be about the same gauge, not really

Re: Stus-List Need to replace forward hatch on 35 mkIII

Hi Matthew Atkins & Hoyle make the direct replacement, but there is an alternative - I put on a low profile stainless hatch from these guys. http://www.manshipmarine.com/low-profile-deck-hatch.html I'll look to see if I have any

Re: Stus-List Need to replace forward hatch on 35 mkIII

Try Hatchmasters in CT https://hatchmasters.com/ If your hatch it broken, they can fix it easily at a fraction of the cost of replacement. All the best, Edd ———- Edd M. Schillay Captain of the “Starship Enterprise” C 37+ | Sail No.: NCC-1701-B Venice Yacht Club | Venice Island,

Re: Stus-List Need to replace forward hatch on 35 mkIII

It is Atkins & Hoyle. Joel On Sun, Apr 26, 2020 at 9:12 PM Matthew Schlanger via CnC-List < cnc-list@cnc-list.com> wrote: > Hello CnC list, > > I was wondering if anyone knew exactly what kind and where I can find a > replacement for my forward hatch on a 1983 C 35 mkIII. > > I am hoping I can

Stus-List Need to replace forward hatch on 35 mkIII

Hello CnC list, I was wondering if anyone knew exactly what kind and where I can find a replacement for my forward hatch on a 1983 C 35 mkIII. I am hoping I can just get a new hatch and use the existing frame, though I assume it comes with a new frame as well just in case. I measured the

Re: Stus-List NMEA 0183 vs. 2000 Wiring Compatibility

Since the NMEA2K conductors usually run from the top of the mast to the back of the boat and supply power to all the devices in between, the voltage drop is a significant problem even if you use the recommended cables. Using the NMEA 0183 cable which doesn't usually supply power to all the

Re: Stus-List NMEA 0183 vs. 2000 Wiring Compatibility

Yes there is a spec for N2K wiring and it differs from 0184, however for relatively short runs (or for that matter even the longer ones) you'll probably be OK. The biggest thing you'll want to verify is that the gauge of the conductors is matched for the power wires. In N2K you'll find a red and

Re: Stus-List NMEA 0183 vs. 2000 Wiring Compatibility

Generally need 5 wires of adequate gauge to handle powering the downstream devices - if required. You can buy connectors to attach yourself to the cable ends. You might have some electrical interference issues but the bus can handle some transmission errors. Ed On Sun., Apr. 26, 2020, 5:57 p.m.

Stus-List NMEA 0183 vs. 2000 Wiring Compatibility

I am replacing some 0183 wiring for NMEA 2000, and I bought some 2000 end connectors (Maretron FA-NF-ST Mini Field Attachable Connector (Female) FA-NM-ST) that you can screw the terminals into. Some of this 0183 wiring was probably installed before the boat was completed, and It looks very

Re: Stus-List Panel switches/circuit breakers

Just to perhaps complete this discussion: I investigated further today and I am pretty sure they are breakers (not switches). There is nothing wired behind the panels and the panels look like Blue Seas that are 8 position 15A breakers: