Stus-List Re: Atomic 4

Joel, The Atomic 4 is a simple engine to work on. In addition to Moyer, you might contact Old Lyme Marina in Connecticutt. I got parts from them when I was resurrecting my old AT4. Here's what I did to resurrect it after 10 years or so of it being idled. 1. Pulled plugs and poured a tablespoo

Stus-List Re: Galley/Nav Drawer Parts Source

I would look to replace the “plastic” sides with Azek (sp??) and cut out the lips and ledges with a good dado saw. Neil Andersen 20691 Jamieson Rd Rock Hall, MD 21661 484-354-8800 From: Tim Rutherford via CnC-List Sent: Thursday, February 18, 2021 12:50:59 PM To:

Stus-List Re: Atomic 4

There is also an Atomic 4 Facebook group. https://www.facebook.com/groups/208227399713304/ Don't forget on Moyer's site there are free 'how-to' videos ( https://moyermarine.com/video_tech-tips/) and for sale videos ( https://moyermarine.com/product-category/videosdvds/), Tech Tips ( https://moyer

Stus-List Re: Atomic 4

None of the mods require changes in the cockpit. I am going to second (third??) the motion to get on the Moyer forum, it is very informative. Joe Coquina C&C 35 MK I Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to

Stus-List Re: Atomic 4

When you theses electronic upgrades Do u have to upgrade or modifications the panels in the cockpit On Thu, Feb 18, 2021 at 2:45 PM Lewis Cooke via CnC-List < cnc-list@cnc-list.com> wrote: > First thing first, I would do a compression test to determine how good the > motor is. The best upgrades

Stus-List Re: Atomic 4

Chances are you will not need a new motor. This is a very simple motor and you could rebuild the thing with basic tools. There are also lots of parts available for this engine. Moyer has a forum you could join and ask all your questions there. My last boat had an A4 and I was on that group.

Stus-List Re: Atomic 4

First thing first, I would do a compression test to determine how good the motor is. The best upgrades I did where electric fuel pump, electronic ignition, coil, Indigo electronics thermostat kit which helps with the rear cylinder running cool and gumming up the valves. Lewis Cooke A/V For Play C&

Stus-List Re: Atomic 4

Joe, I called and left you a contact, Joe Colautti services many of our members here in NOLSC.  Of late I have been doing mostly my own (I am a former Ford Model A owner), but I have used him in the past. http://colauttimarine.com/ yr ftfl svnt etc. Doug Robinson On 2/18/21 1:49 PM, Joel D

Stus-List Atomic 4

Good afternoon sailors My refit of sailboat is almost done Before spring I want to get my atomic 4 fired up and ready to go, presently the motor is my garage I would like some guidance and help where to Go other than Moyer marine if there another place, I love them and appreciate there honesty But

Stus-List Re: Galley/Nav Drawer Parts Source

You can probably make something that will work out of a block of wood. Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR On Thu, Feb 18, 2021 at 9:51 AM Tim Rutherford via CnC-List < cnc-list@cnc-list.com> wrote: > Looking for a source of the parts to repair a drawer from the Nav Station

Stus-List Re: Galley/Nav Drawer Parts Source

Try Lee Valley woodworking catalog. Sent from my iPhone On Feb 18, 2021, at 12:51 PM, Tim Rutherford via CnC-List wrote:  Looking for a source of the parts to repair a drawer from the Nav Station, specifically the plastic corner pieces that join the front to the sides. Photos linked below:

Stus-List Galley/Nav Drawer Parts Source

Looking for a source of the parts to repair a drawer from the Nav Station, specifically the plastic corner pieces that join the front to the sides. Photos linked below: Photo 1 - the corner piece that is not broken, I need a piece like this on the other side

Stus-List Re: adding tracks to deck

Yes! I don’t understand why you would drill out a hole oversize, and lose the strength and structure the fiberglass provides, leaving just some epoxy only held on by a thin bond attached to the edge. It isn’t that hard to pick out the balsa with a pick, or Allen key like Dave suggests. Granted