I’d go with injectors.
Tom Buscaglia
S/V Alera
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660
> On Sep 7, 2021, at 6:17 PM, Dave via CnC-List wrote:
>
>
> Evening all. Trying to help a neighbour here with a diesel issue. His
> engine will rev freely at idle but with the
Dave,
This link below should bring up the service manual for the M20, on p. 17
of the .pdf, Fig. 37 shows the HP pump with the governor on the left
end. It's kind of integral to the pump, looks difficult to remove
separate from the pump. If sticking is the issue one thought would be
to try
Thanks Neil – We did check for fuel returning but only at varying no-load RPMs, not under load.There should be no air or water in the system- we also ran it from a jury rigged tank, no filter, clean fuel, so I’m pretty sure those basics were eliminated.No offense taken – most of the time people do
Dave,
Sure sounds like a fuel issue. The governor does not restrict flow, it
sets the rotation of the plungers in the HP pump which controls how much
fuel in delivered to the injectors. The fuel not used or which leaks by
the pump plungers is what returns to the tank. Under light load
She’s in Annapolis. She’ll be in Newport for a couple days, then Mystic and
Cape May before we return home.
Joel
On Tue, Sep 7, 2021 at 11:06 AM Shawn Wright via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi Joel,
>
> I'm interested in hearing more... where is she located?
>
> --
> Shawn Wright
Is the prop clean? I may also be the fuel filters. It sounds like low fuel
flow. Put in new filters, and bleed the system. DougSent from my T-Mobile 4G
LTE Device
Original message From: Dave via CnC-List
Date: 9/7/21 18:17 (GMT-08:00) To:
cnc-list@cnc-list.com Cc:
I held out as long as I could and am now looking into adding a bimini to my
37.
Does anyone have strong opinion for options or recommendations for
suppliers?
thx
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your
Evening all. Trying to help a neighbour here with a diesel issue. His engine will rev freely at idle but with the transmission engaged in either forward or reverse, revs increase very slowly and only to 1800-2000 RPM on the tach. (whether tach is accurate or not, RPM under load is much
Hello
Is there anyone on the list located in the Sandusky Ohio area. If so contact
me off list.
Thanks
Adam Hayden
Sent from my Bell Samsung device over Canada’s largest network.
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to
Hi Joel,
I'm interested in hearing more... where is she located?
--
Shawn Wright
shawngwri...@gmail.com
S/V Callisto, 1974 C 35
https://www.facebook.com/SVCallisto
On Sun, Sep 5, 2021 at 11:12 AM Joel Aronson via CnC-List <
cnc-list@cnc-list.com> wrote:
> I got a case of 5 foot itis. We
10 matches
Mail list logo
